A Qualitative Data Analysis for Supplier Quality-Management Practices for Engineer-Procure-Construct Projects
Publication: Journal of Construction Engineering and Management
Volume 142, Issue 2
Abstract
The process of assuring the procured and fabricated materials for an engineer-procure-construct (EPC) project are within their quality requirements is challenging because nearly every EPC construction project is complex and distinctive from previous projects in terms of its size, supply chain, and materials usage. In particular, EPC projects include contractors, subcontractors, and suppliers who collaboratively perform the engineering design for the project, procure the required materials and equipment, and then construct. Many (or most) construction organizations, representing owners and contractors, place high importance on documenting and tracking the quality performance of their suppliers as part of their sup plier quality management (SQM) to ensure that procured and fabricated materials are within the quality specifications. However, these organizations still face problems with their SQM, evidenced by the large number of rework tasks and replacement efforts for the supplied materials in the EPC projects. This highlights the importance of investigating the current supplier quality practices to explore effective practices to deliver products with the expected quality and zero rework. In this paper, six structured interviews were conducted with contractors, and 92 SQM documents including procedures and reports from 21 owners and contractors in the EPC industry were analyzed to identify the current practices used by these organizations with regard to SQM, and the most effective practices that construction engineering managers could borrow to improve the existing SQM in the EPC projects. The contribution of this research can be used by stakeholders in the construction industry to improve SQM within their organizations. Researchers can also benefit from this research to better understand SQM practices within the construction industry.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research effort is supported by the Construction Industry Institute (CII) on RT 308–Achieving Zero Rework through Effective Supplier Quality Practices. The opinions expressed in this paper are those of the authors and not necessarily of CII.
References
AlMaian, R., Needy, K., Walsh, K., Alves, T., and Neuman, Y. (2013). “Suppler quality management inside and outside the construction industry.” Proc., 2013 American Society for Engineering Management, American Society for Engineering Management, Huntsville, AL.
Alves, T., Walsh, K., Neuman, Y., Needy, K., and AlMaian, R. (2013). “Supplier quality surveillance practices in construction.” 21st Annual Conf. of the Int. Group for Lean Construction– IGLC 21, Fortaleza, Brazil, 833–842.
Arditi, D., and Gunaydin, H. (1997). “Total quality management in the construction process.” Int. J. Proj. Manage., 15(4), 235–243.
Arditi, D., and Gunaydin, H. (1998). “Factors that affect process quality in the life cycle of building projects.” J. Constr. Eng. Manage., 194–203.
Caldas, H. C., Menches, L. C., Navarro, L., and Vargas, M. D. (2012). “An analysis of global procurement and materials management practices in the construction industry.”, Construction Industry Institute, Univ. of Texas at Austin, Austin, TX.
Chase, G. (1993). “Effective total quality management (TQM) process for construction.” J. Manage. Eng., (9), 433–443.
Council of Supply Chain Management Professionals. (2012). “Supply chain management terms and glossary.” 〈http://cscmp.org/aboutcscmp/definitions.asp〉 (May 2013).
Cova, B., and Hoskins, S. (1997). “A twin-track approach to project marketing.” Eur. Manage. J., 15(5), 546–556.
Ford, E. W., Duncan, W., Bedeian, A. G., Ginter, P. M., Rousculp, M. D., and Adams, A. M. (2005). “Mitigating risks, visible hands, inevitable disasters, and soft variables: Management research that matters to managers.” Acad. Manage. Executive, 19(4), 24–38.
Guest, G., Namey, E., and Mitchell, M. (2012). Collecting qualitative data: A field manual for applied research, Sage, Thousands Oaks, CA.
Lo, T. (2002). “Quality culture: A product of motivation within organization.” Managerial Auditing J., 17(5), 272–276.
Miles, M. B., and Huberman, A. M. (1994). Qualitative data analysis: An expanded sourcebook, Sage, Thousand Oaks.
Needy, K., and Ries, R. (2010). “Best practices in quality management for the capital facilities delivery industry.”, Construction Industry Institute, Univ. of Texas at Austin, Austin, TX.
Peters, T. J. (1987). Thriving on chaos: Handbook for a management revolution, Knopf, New York.
Plaza, S., Padilla, B., Ortiz, A., and Rodrigues, E. (2014). “The value of grounded theory for disentangling inequalities in maternal-child healthcare in contexts of diversity: A psycho-sociopolitical approach.” Psychosocial Intervention/Intervencion Psicosocial, 23(2), 125–133.
Provalis Research. (2014). 〈http://provalisresearch.com/products/qualitative-data-analysis-software/〉 (Jan. 2014).
Schutt, R. (2012). Investigating the social world: The process and practice of research, 7th Ed., Sage, Thousands Oaks, CA.
Siebels, D. (2004). The quality improvement glossary, ASQ Quality Press, Milwaukee, WI.
Songhori, J., Tavana, M., Azadeh, A., and Khakbaz, M. (2011). “A supplier selection and order allocation model with multiple transportation alternatives.” Int. J. Adv. Manuf. Technol., 52(1-4), 365–376.
Srnka, K. J., and Koeszegi, S. T. (2007). “From words to numbers: How to transform qualitative data into measurable quantitative results.” Schmalenbach Bus. Rev., 59(1), 29–57.
Strauss, A. L., and Corbin, J. M. (1998). Basics of qualitative research: Techniques and procedures for developing grounded theory, Sage, Thousand Oaks, CA.
Thurston, W. E., et al. (2014). “Discordant indigenous and provider frames explain challenges in improving access to arthritis care: a qualitative study using constructivist grounded theory.” Int. J. Equity Health, 13(1), 19–46.
Tommelein, I. D., Walsh, K. D., and Hershauer, J. C. (2003). “Improving capital projects supply chain performance.”, Construction Industry Institute, Univ. of Texas at Austin, Austin, TX.
Yeo, K. T., and Ning, J. H. (2002). “Integrating supply chain and critical chain concepts in engineer-procure-construct (EPC) projects.” Int. J. Proj. Manage., 20(4), 253–262.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 142 • Issue 2 • February 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Apr 16, 2014
Accepted: Jun 17, 2015
Published online: Jul 31, 2015
Discussion open until: Dec 31, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.