Productivity in Daytime and Nighttime Construction of Urban Sewer Systems
Publication: Journal of Construction Engineering and Management
Volume 140, Issue 7
Abstract
Sewer construction in urban areas often requires nighttime operations to meet project schedules and to reduce possible negative effects of construction work on traffic operations. Although several studies investigated the correlation between daytime and nighttime construction productivity, there is a limited understanding of how shift work may influence productivity in sewer construction projects. This research examined the labor productivity of 10 activities typically performed in both day and night shifts in sewer construction. The research employed Levene’s test and t-tests to analyze the data collected from eight sewer construction projects in Ho Chi Minh City, Vietnam. The results indicated that (1) pavement cutting and timber piling were more productive in daytime operations, whereas steel sheet piling and manhole concreting were more productive in nighttime operations; (2) no statistically significant difference exists in productivity between day and night shifts for the following activities: excavation, form installation, rebar installation, pipe laying, sand filling, and asphalt paving; and (3) the productivity of pavement cutting, excavation, timber piling, steel sheet piling, pipe laying, and asphalt paving was higher in partial road closure than in full road closure methods. These statistical results were verified and validated by the experienced site managers/engineers through eight structured on-site interviews. This research contributes to the construction productivity knowledge by providing empirical results of daytime and nighttime operation productivity in sewer construction. It is expected that practitioners can use these results to focus proper attention and resources for day and night shifts in sewer construction projects.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Kaisy, A., and Nassar, K. (2009). “Developing a decision support tool for nighttime construction in highway projects.” J. Constr. Eng. Manage., 119–125.
Arditi, D., Lee, D.-E., and Polat, G. (2007). “Fatal accidents in nighttime vs. daytime highway construction work zones.” J. Saf. Res., 38(4), 399–405.
Bryden, J. E., and Mace, D. J. (2002). “A procedure for assessing and planning nighttime highway construction and maintenance.”, Transportation Research Board, National Academy Press, Washington, DC.
Bureau of Labor Statistics. (1947). “Hours of work and output.”, The U.S. Department of Labor, Washington, DC.
Douglas, K. D., and Park, S.-B. (2003). “Selection criteria for using nighttime construction and maintenance operations.”, Oregon State Univ., Corvallis, OR.
Dunston, P. S., Savage, B. M., and Mannering, F. L. (2000). “Weekend closure for construction of asphalt overlay on urban highway.” J. Constr. Eng. Manage., 313–319.
Ellis, R. D., and Amos, S. J. (1996). “Development of work zone lighting standards for nighttime highway work.” Transportation Research Record 1529, Transportation Research Board, Washington, DC, 35–42.
Ellis, R. D., and Kumar, A. (1993). “Influence of nighttime operations on construction cost and productivity.” Transportation Research Record 1389, Transportation Research Board, Washington, DC, 31–37.
Elrahman, O. A. (2008). “Night-time road construction operations: Synthesis of practice.” New York State Dept. of Transportation, New York.
El-Rayes, K., and Moselhi, O. (2001). “Impact of rainfall on the productivity of highway construction.” J. Constr. Eng. Manage., 125–131.
Federal Highway Administration (FHWA). (2003). “Full road closure for work zone operations: A cross-cutting study.”, Washington, DC.
Folkard, S., and Tucker, P. (2003). “Shift work, safety and productivity.” Occup. Med., 53(2), 95–101.
Hancher, D. E., and Taylor, T. R. B. (2001). “Nighttime construction issues.” Transportation Research Record 1761, Transportation Research Board, Washington, DC, 107–115.
Hanna, A. S., Chang, C.-K., Sullivan, K. T., and Lackney, J. A. (2008). “Impact of shift work on labor productivity for labor intensive contractor.” J. Constr. Eng. Manage., 197–204.
Hinze, J., and Carlisle, D. L. (1990). “Variables affected by nighttime construction projects.” Transportation Research Record 1282, Transportation Research Board, Washington, DC, 95–103.
Hyari, K., and El-Rayes, K. (2006). “Lighting requirements for nighttime highway construction.” J. Constr. Eng. Manage., 435–443.
Lee, E.-B., Lee, H., and Ibbs, W. C. (2007). “Productivity aspects of urban freeway rehabilitation with accelerated construction.” J. Constr. Eng. Manage., 798–806.
Mechanical Contractors Association of America (MCAA). (1994). Change orders, overtime, and productivity, Rockville, MD.
Minchin, R. E., Thum, S. B., Lewis, D. W., and Ellis, R. D. (2013). “Using contractor bid amounts to estimate the impact of night construction on cost for transportation construction.” J. Constr. Eng. Manage., 1055–1062.
Mostafavi, A., Valentin, V., Abraham, D. M., and Louis, J. (2012). “Assessment of the productivity of nighttime asphalt paving operations.” J. Constr. Eng. Manage., 1421–1432.
Park, S.-B., Griffith, A. S., Douglas, K. D., and Haas, K. J. (2002). “Factors of importance for determining daytime versus nighttime operations in Oregon.” Transportation Research Record 1813, Transportation Research Board, Washington, DC, 305–313.
Schwartzkopf, W. (2004). Calculating lost labor productivity in construction claims, 2nd Ed., Aspen Publishers, New York.
Shane, J. S., Kandil, A., and Schexnayder, C. J. (2012). A guidebook for nighttime construction: Impacts on safety, quality, and productivity, Transportation Research Board, Washington, DC.
U.S. Army Corps of Engineers. (1979). Modification impact evaluation guide, Dept. of the Army, Washington, DC.
Vidacek, S., Kaliterna, L., Radosevic-Vidacek, B., and Folkard, S. (1986). “Productivity on a weekly rotating shift system: Circadian adjustment and sleep deprivation effects?” Ergonomics, 29(12), 1583–1590.
Vorster, M. C., and de la Garza, J. M. (1990). “Consequential equipment costs associated with lack of availablity and downtime.” J. Constr. Eng. Manage., 656–669.
Zayed, T. M., and Halpin, D. W. (2004). “Quantitative assessment for piles productivity factors.” J. Constr. Eng. Manage., 405–141.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 29, 2013
Accepted: Feb 19, 2014
Published online: Mar 31, 2014
Published in print: Jul 1, 2014
Discussion open until: Aug 31, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.