Improving Environmental and Production Performance in Construction Projects Using Value-Stream Mapping: Case Study
Publication: Journal of Construction Engineering and Management
Volume 140, Issue 2
Abstract
Current sustainable construction research has been focused mainly on the design and operation stages of projects. But the execution or production stages have not received much attention. Also, current sustainable and construction management approaches often deal with environmental and production issues separately. In this paper, a lean production tool called value stream mapping (VSM) is used to simultaneously assess environmental and production waste over the execution stage of construction projects. VSM considers the elaboration of maps that assist project managers in diagnosing the current state of production to propose improvements in a future state. While traditional tools deal with symptoms, VSM tackles root problems. This paper reports a case study of the VSM application as a green-lean approach in the construction of a hospital in order to improve its environmental and production performance during the structural concrete work stage. The main contribution of this study is to provide a fully detailed experience of the VSM application in construction, confirming its ability to detect the sources of environmental and production waste, quantify them, and suggest reduction strategies. It also presents the development of a well-established implementation process of the VSM. The case study reinforces the effectiveness of the proposed green-lean approach for improving the sustainable performance of construction projects because it can help to optimize the use of resources and reduce costs, improve quality standards, and minimize the environmental impacts generated by the construction of projects.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahn, C., Xie, H., Lee, S., Abourizk, S., and Peña-Mora, F. A. (2010). “Carbon footprints for tunnel construction processes in the preplanning phase using collaborative simulation.” Proc. of the ASCE Construction Research Congress, Reston, VA.
Alves, T. C. L., Tommelein, I. D., and Ballard, G. (2005). “Value stream mapping for make-to-order products in a job shop environment.” Proc. of the 2005 Construction Research Congress, ASCE, Reston, VA.
Arbulu, R. J., and Tommelein, I. D. (2002). “Value stream analysis of construction supply chains: Case study on pipe supports used in power plants.” Proc. of 10th Annual Conf. of Int. Group for Lean Construction, Gramado, Brazil.
Bae, J. W., and Kim, Y. W. (2007). “Sustainable value on construction project and applications of lean construction methods.” Proc. of 15th Annual Conf. of the Int. Group for Lean Construction, Michigan, 312–321.
Ballard, G. (2000). “The Last Planner System of production control.” Ph.D. dissertation, School of Civil Engineering, Faculty of Engineering, Univ. of Birmingham, Birmingham, UK.
BRE Group. (2011). “BREEAM new construction: Non domestic buildings.” Technical Manual SD5073-2.0:2011, Watford, UK.
Eastman, C., Teicholz, P., Sacks, R., and Liston, K. (2008). “BIM handbook introduction.” BIM handbook: A guide to building information modeling for owners, managers, architects, engineers, contractors, and fabricators, 1st Ed., Wiley, New Jersey, 1–63.
Fischer, M. (2006). “Formalizing construction knowledge for concurrent performance based design.” Intelligent Computing in Engineering and Architecture, Lecture Notes in Computer Science, Vol. 4200, 186–205.
Fontanini, P. S. P., and Picchi, F. A. (2004). “Value stream macro mapping—A case study of aluminum windows for construction supply chain.” Proc. of 12th Annual Conf. of Int. Group for Lean Construction, Copenhaguen, Denmark, 576–587.
Forbes, L. H., Ahmed, S. M., and Barcala, M. (2002). “Adapting lean construction theory for practical application in developing countries.” Proc. of the 1st CIB W107 Int. Conf.: Creating a Sustainable Construction Industry in Developing Countries, CIB (International Council for Building), Rotterdam, The Netherlands, 219–227.
Forsberg, A., and Von Malmborg, F. (2004). “Tools for environmental assessment of the built environment.” Build. Environ., 39(2), 223–228.
González, V., Alarcón, L. F., and Mundaca, F. (2008). “Investigating the relationship between planning reliability and project performance.” Prod. Plann. Control J., 19(5), 461–474.
González, V., and Echaveguren, T. (2012). “Exploring the environmental modeling of road construction operations using discrete-event simulation.” Autom. Constr., 24, 100–110.
Halpin, D. W. (1976). “CYCLONE: Methods for modelling job site processes.” J. Constr. Div., 103(3), 489–499.
Horman, M. J., Riley, D., Pulaski, M. H., and Leyenberger, C. (2004). “Lean and green: Integrating sustainability and lean construction.” CIB World Building Congress, CIB (International Council for Building), Rotterdam, The Netherlands.
Howell, G., Ballard, G., and Tommelein, I. (2011). “Construction engineering—Reinvigorating the discipline.” J. Constr. Eng. Manage., 740–744.
Kevern, J. (2011). “Green building and sustainable infrastructure: Sustainability education for civil engineers.” J. Prof. Issues Eng. Educ. Pract., 107–112.
Kibert, C. J. (1994). “Establishing principles and a model for sustainable construction.” Proc. of First Int. Conf. of CIB TG 16 on Sustainable Construction, CIB (International Council for Building), Rotterdam, The Netherlands, 312–318.
Kim, Y. W., and Bae, J. W. (2010). “Assessing the environmental impacts of a lean supply system: Case study of high-rise condominium construction in Korea.” J. Archit. Eng., 144–150.
Klotz, L., Horman, M., and Bodelschatz, M. (2007). “A lean modeling protocol for evaluating green project delivery.” Lean Constr. J., 3(1), 1–18.
Larsson, N., iiSBE, and Macías, M. (2012). “Overview of the SBTool assessment framework.” International Initiative for a Sustainable Built Environment, Madrid, Spain, 〈http://www.iisbe.org/system/files/private/SBTool%202012%20description%2008Apr12.pdf〉 (Oct. 14, 2012).
Martínez, P., González, V., and Da Fonseca, E. (2009). “Integración conceptual-Verde en el diseño, Planificación y Construcción de Proyectos.” Revista Ingeniería de Construcción, 24(1), 5–32 (in Spanish).
Mastroianni, R., and Abdelhamid, T. (2003). “The challenge: The impetus for change to lean project delivery.” Proc. of the 11th Annual Conf. of the Int. Group for Lean Construction, 610–621.
Nahmens, I. (2009). “From lean to green construction: A natural extension.” Construction Research Congress 2009: Building a Sustainable Future, ASCE, Reston, VA, 1058–1067.
Nam, C. H., and Tatum, C. B. (1988). “Major characteristics of constructed products and resulting limitations of construction technology.” Constr. Manage. Econ., 6(2), 133–147.
Ohno, T. (1988). Toyota production system: Beyond large scale production, Productivity Press, Cambridge, MA.
Pasqualini, F., and Zawislak, P. A. (2005). “Value stream mapping in construction: A case study in a Brazilian construction company.” Proc. of 13th Annual Conf. of Int. Group for Lean Construction, Sydney, Australia, 117–125.
Rosenbaum, S. (2012). “Value stream mapping application for detecting production and environmental waste: Case study at the University of Los Andes.” Civil Engineering thesis, Universidad de Chile, Santiago, Chile (in Spanish).
Rother, M., and Shook, J. (2003). “Learning to see: Value stream mapping to create value and eliminate MUDA.” Lean Enterprise Institute, Brookline, MA.
Rueff, A., and Cachadinha, N. (2011). “Lean construction and sustainability—Complementary paradigms: A case study.” Proc. of 19th Annual Conf. of the Int. Group for Lean Construction, Lima, Peru, 611–621.
U.S. Environmental Protection Agency (USEPA). (2007a). “The lean and environmental toolkit.” Washington, DC, 〈http://www.epa.gov/lean/environment/toolkits/environment/index.htm〉 (Aug. 20, 2011).
U.S. Environmental Protection Agency (USEPA). (2007b). “Lean, energy and climate toolkit.” Washington, DC, 〈http://www.epa.gov/lean/environment/toolkits/energy/index.htm〉 (Aug. 20, 2011).
U.S. Green Building Council (USGBC). (2009). “LEED reference guide for green building design and construction.” Washington, DC.
Yu, H., Tweed, T., Al-Hussein, M., and Nasseri, R. (2009). “Development of lean model for house construction using value stream mapping.” J. Constr. Eng. Manage., 782–790.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 140 • Issue 2 • February 2014
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 14, 2012
Accepted: Sep 3, 2013
Published online: Oct 11, 2013
Published in print: Feb 1, 2014
Discussion open until: Mar 11, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.