Project Impacts of Specialty Mechanical Contractor Design Involvement in the Health Care Industry: Comparative Case Study
Publication: Journal of Construction Engineering and Management
Volume 139, Issue 9
Abstract
Recent research efforts on project delivery have been heavily focused on using project-level indicators to predict cost and schedule outcomes. However, specialty contractors performing at the system level have an increasingly important role in the design and construction of healthcare and other high-performance facilities. From curtain wall assemblies to HVAC systems, specialty contractors possess the system knowledge and field expertise to support delivery of energy-efficient, cost-effective systems. Therefore, this research adapted the use of existing metrics from broader, project-level applications to a narrower building system, focused to contextualize the importance of system delivery. A comparative case study analysis was conducted to collect quantitative data on schedule and cost outcomes, construction safety, and building energy performance on two large healthcare facilities. By comparing a design-build and design-assist case, this paper demonstrates how increasing design involvement of mechanical contractors provides opportunities to reduce cost growth, schedule growth, and safety incidents, and improve the HVAC system performance in healthcare projects. Contextual lessons from the design-build case are discussed and suggested for application in other forms of project delivery.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE). (2004). ASHRAE Standard 90.1-2004, Energy standard for buildings except low-rise residential buildings, Atlanta, GA.
American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). (2007). ASHRAE handbook: HVAC applications, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Atlanta.
Behm, M. (2005). “Linking construction fatalities to the design for construction safety concept.” Saf. Sci., 43(8), 589–611.
Bennett, J., and Ferry, D. (1990). “Specialist contractors: A review of issues raised by their new role in building.” Constr. Manage. Econ., 8(3), 259–283.
Chan, A., Scott, D., and Lam, E. (2002). “Framework of success criteria for design/build projects.” J. Manage. Eng., 18(3), 120–128.
Consortium for Energy Efficiency. (2005). Commercial building performance: Healthcare facilities, Boston, MA.
Construction Industry Institute. (2003). “Owner’s tool for project delivery and contract strategy selection user’s guide: 2nd edition.”, Austin, TX.
El Wardani, M., Messner, J., and Horman, M. (2006). “Comparing procurement methods for design-build projects.” J. Construct. Eng. Manage., 132(3), 230–238.
Gil, N., Tommelein, I. D., Kirkendall, R. L., and Ballard, G. (2000). “Contribution of specialty contractor knowledge to early design.” Eigth Annual Conf. of the International Group for Lean Construction, University of Sussex, Brighton, UK.
Gil, N., Tommelein, I. D., Kirkendall, R. L., and Ballard, H. (2001). “Leveraging specialty contractor knowledge in design.” Eng. Construct. Architect. Manage., 8(5–6), 355–367.
Konchar, M., and Sanvido, V. (1998). “Comparison of U.S. project delivery systems.” J. Constr. Eng. Manage., 124(6), 435–444.
Korkmaz, S. (2005). “High performance building project delivery.” Mindbend Research Symp., Pennsylvania State Univ., Univ. Park, PA.
Korkmaz, S., Riley, D., and Horman, M. J. (2010). “Piloting evaluation metrics for sustainable, high performance building project delivery.” J. Constr. Eng. Manage., 131(1), 877–885.
Ling, F. Y. Y., Chan, S. L., Chong, E., and Ee, L. P. (2004). “Predicting performance of design-build and design-bid-build projects.” J. Constr. Eng. Manage., 130(1), 75–83.
Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. (2001). Code of Federal Regulations, 29 CFR 1904.7(b). General recording criteria.
Oyetunji, A., and Anderson, S. (2006). “Relative effectiveness of project delivery and contract strategies.” J. Constr. Eng. Manage., 132(1), 3–13.
Riley, D., Sanvido, V., Horman, M. J., McLaughlin, M., and Kerr, D. (2005). “Lean and green: The role of design-build mechanical competencies in the design and construction of green buildings.” Construction Research Congress, ASCE, Reston, VA, 1–8.
Taylor, J., Dossick, C., and Garvin, M. (2011). “Meeting the burden of proof with case-study research.” J. Constr. Eng. Manage., 137(4), 303–311.
Thomas, S., Macken, C., Chung, T., and Kim, I. (2002). Measuring the impacts of the delivery system on project performance—Design-build and design-bid-build, Construction Industry Institute, Austin, TX.
Tommelein, I. D., and Ballard, G. (1997). “Coordinating specialists.” Technical Rep., Construction Engineering and Management Program, Civil and Environmental Engineering Dept., Univ. of California, Berkeley, CA.
Tymvios, N., Gambatese, J., and Sillars, D. (2012). “Designer, contractor, and owner views on the topic of design for construction worker safety.” Construction Research Congress, ASCE, Reston, VA.
U.S. Bureau of Labor Statistics. (2008). Census of fatal occupational injuries, 2008, U.S. Dept. of Labor, Washington, DC.
Yin, R. (2002). Case study research: Design and methods, 3rd Ed., Sage Publications, Newbury Park, CA.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 14, 2012
Accepted: Apr 11, 2013
Published online: Aug 15, 2013
Published in print: Sep 1, 2013
Discussion open until: Jan 15, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.