Assessing the Accuracy of Applying Photogrammetry to Take Geometric Measurements on Building Products
Publication: Journal of Construction Engineering and Management
Volume 136, Issue 2
Abstract
The present research describes the fundamental working mechanism of photogrammetry and characterizes the errors of the photogrammetry-derived geometric measurements on building products in a systematic, practical, and statistically significant way. A site engineer simply takes snapshots of a building product with a digital camera from different angles. Back in office, the engineer derives as-built measurements through postprocessing those photos by use of photogrammetry software. The twelve objects sampled in our experiments were building products and building facilities found on the campus of Hong Kong Polytechnic University, yielding 79 paired geometric measurements (length, width, and height) by photogrammetry and by measurement tape, respectively. The biases and limitations of analyzing the agreement between two sets of measurements by regression and correlation coefficient techniques were first revealed. Then, the “95% limits of agreement” method was applied on the sample data and the confidence intervals were established for the limits of agreement derived, so as to ensure validity and statistical significance of the results. In short, the main contribution of this research lies in formalizing a statistically significant, quantitatively reliable technique to assess the accuracy of applying photogrammetry in particular applications of construction engineering. Through weighing the accuracy level achievable by photogrammetry against the accuracy level desirable in a particular application, the engineer makes the final decision on the applicability of the photogrammetry-based approach.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented in this paper was substantially funded by Hong Kong Research Grants Council (Grant No. UNSPECIFIEDPolyU 5245/08E).
References
Altman, D. G., and Bland, J. M. (1983). “Measurement in medicine—the analysis of method comparison studies.” Statistician, 32(3), 307–317.
Beyer, H. A., Uffenkamp, V., and van der Vlugt, G. (1995). “Quality control in industry with digital photogrammetry.” Optical 3-D measurement techniques III, A. Gruen and H. Kahmen, eds., Wichmann Verlag, Heidelberg, Germany, 29–38.
Bland, J. M., and Altman, D. G. (1986). “Statistical-methods for assessing agreement between 2 methods of clinical measurement.” Lancet, 1(8476), 307–310.
Bland, J. M., and Altman, D. G. (1995). “Comparing methods of measurement—Why plotting difference against standard method is misleading.” Lancet, 346(8982), 1085–1087.
Bland, J. M., and Altman, D. G. (1999). “Measuring agreement in method comparison studies.” Stat. Methods Med. Res., 8(2), 135–160.
Bland, J. M., and Altman, D. G. (2003). “Applying the right statistics: analyses of measurement studies.” Ultrasound Obstet. Gynecol., 22(1), 85–93.
Dai, F., and Lu, M. (2008). “Photo-based 3D modeling of construction resources for visualization of operations simulation: Case of modeling a precast facade.” Proc., Winter Simulation Conf., The Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, 2439–2446.
Eos Systems Inc. (2007). “PhotoModeler: Close-range photogrammetric measurement and 3D modeling software.” ⟨http://www.photomodeler.com⟩ (June 20, 2007).
Fraser, C. S. (1996). “Industrial measurement applications.” Close range photogrammetry and machine vision, K. B. Atkinson, ed., Whittles Publishing, Scotland, UK, 361.
Kim, H., and Kano, N. (2008). “Comparison of construction photograph and VR image in construction progress.” Autom. Constr., 17(2), 137–143.
Linnet, K., and Bruunshuus, I. (1991). “HPLC with enzymatic detection as a candidate reference method for serum creatinine.” Clin. Chem., 37, 1669–1675.
Luhmann, T., Robson, S., Kyle, S., and Harley, I. (2006). Close range photogrammetry: Principles, methods and applications, Whittles, Scotland, U.K.
Luhmann, T., and Tecklenburg, W. (2001). “Hybrid photogrammetric and geodetic surveillance of historical buildings for an urban tunnel construction.” Proc., Int. Workshop on Recreating the Past Visualization and Animation of Cultural Heritage, International Society for Photogrammetry and Remote Sensing, Enschede, The Netherlands.
McGlone, J. C. (1989). “Analytic data-reduction schemes in non-topographic photogrammetry.” Non-topographic photogrammetry, 2nd Ed., H. M. Karara, ed., American Society for Photogrammetry and Remote Sensing, Falls Church, Va., 55.
Memon, Z. A., Majid, M. Z. A., and Mustaffar, M., and (2005). “An automatic project progress monitoring model by integrating AutoCAD and digital photos.” Proc., 2005 ASCE International Conf. on Computing in Civil Engineering, L. Soibelman and F. Peña-Mora, eds., American Society for Civil Engineers (ASCE), Reston, Va., 151.
Oehlert, G. W. (1992). “A note on the delta method.” Am. Stat., 46(1), 27–29.
Proctor, D. W., and Atkinson, K. B. (1972). “Experimental photogrammetric wriggle survey in the second mersey tunnel.” Tunnels Tunnel. Int., 4(2), 115–118.
Quiñones-Rozo, C. A., Hashash, Y. M. A., and Liu, L. Y. (2008). “Digital image reasoning for tracking excavation activities.” Autom. Constr., 17(5), 608–622.
Rohatgi, V. K. (1976). An introduction to probability theory and mathematical statistics, Wiley, New York.
Rüther, H. (1989). “An overview of software in non-topographic photogrammetry.” Non-topographic photogrammetry, 2nd Ed., H. M. Karara, ed., American Society for Photogrammetry and Remote Sensing, Falls Church, Va., 145.
Tsai, R. Y. (1987). “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses.” IEEE Trans. Rob. Autom., 3(4), 323–344.
Viswanathan, M. (2005). Measurement error and research design, Sage, Thousand Oaks, Calif.
Wolf, P. (1983). Elements of photogrammetry, McGraw-Hill, New York, 559–601.
Wong, K. W. (1980). “Basic mathematics of photogrammetry.” Manual of photogrammetry, 4th Ed., C. C. Slama, ed., American Society of Photogrammetry, Falls Church, Va., 101.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jan 6, 2009
Accepted: Jun 22, 2009
Published online: Jan 15, 2010
Published in print: Feb 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.