Laboratory and Field Evaluation of Commercially Available Rapid-Repair Materials for Concrete Bridge Deck Repair
Publication: Journal of Performance of Constructed Facilities
Volume 36, Issue 4
Abstract
Extensive investigation of rapid-repair materials is of utmost importance in limiting the impact of repairs on vehicles traveling on bridges as well as in selecting suitable materials with acceptable mechanical properties and durability requirements. The objective of this study was to evaluate eight commercial cementitious rapid-repair materials for application to concrete bridge decks in Utah. A robust laboratory study to quantify mechanical performance and durability was been conducted, accompanied by evaluation of field performance. More than 450 specimens were prepared according to manufacturer recommendations and tested at ages of 4 h, 24 h, 7 days, and 28 days to measure their setting time, compressive and splitting tensile strength, elastic modulus, autogenous and drying shrinkage, restrained ring shrinkage, surface resistivity, and slant/shear bond strength. To evaluate the field performance of the materials, repair patches on the SR-193 bridge over US-89 in Layton, Utah, were inspected three times over a one-year period and crack developments on these patches were recorded. The purpose of the study was to identify the most influential factors in the success or failure of deck repair materials and to determine which tests are most helpful in the qualification of deck repair materials. The results will assist transportation officials, such as state departments of transportation (DOTs), in identification and qualification of materials to support successful and long-lasting bridge deck repairs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge funding support for this project from the Utah Department of Transportation (Grant No. 18-8982). Any conclusions or statements contained in this manuscript reflect those of the authors and not of the Utah Department of Transportation or its employees.
References
AASHTO. 2008. Standard method of test for estimating the cracking tendency of concrete. AASHTO T 334. Washington, DC: AASHTO.
AASHTO. 2011. Standard method of test for surface resistivity indication of concrete’s ability to resist chloride ion penetration. AASHTO TP 95. Washington, DC: AASHTO.
ACI (American Concrete Institute). 2014. Guide to materials selection for concrete repair. ACI-546.3R-14. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI 318-19. Farmington Hills, MI: ACI.
Baluch, M. H., M. K. Rahman, and A. H. Al-Gadhib. 2002. “Risks of cracking and delamination in patch repair.” J. Mater. Civ. Eng. 14 (4): 294–302. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:4(294).
Barluenga, G., and F. Hernández-Olivares. 2004. “SBR latex modified mortar rheology and mechanical behavior.” Cem. Concr. Res. 34 (3): 527–535. https://doi.org/10.1016/j.cemconres.2003.09.006.
Cervo, N. M., and A. J. Schokker. 2010. “Bridge deck patching material evaluation.” J. Bridge Eng. 15 (6): 723–730. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000109.
Cusson, D., and N. Mailvaganam. 1996. “Durability of repair materials.” Concr. Int. Des. Constr. 18 (3): 34–38.
Emberson, N. K., and G. C. Mays. 1990. “Significance of property mismatch in the patch repair of structural concrete part 1: Properties of repair systems.” Mag. Concr. Res. 42 (152): 147–160. https://doi.org/10.1680/macr.1990.42.152.147.
Emmons, P. H., and A. M. Vaysburd. 1995. “Total system concept—Necessary for improving the performance of repaired structures.” Concr. Int. 17 (3): 31–36.
Fowler, D. W., G. P. Beer, and A. H. Meyer. 1983. “A survey on the use of rapid-setting repair materials.” Transp. Res. Rec. 943: 33–37.
Goodwin, F. 2013. “Early-age repair material properties and early age repairs.” In ACI Web Session, ACI Spring 2013 Convention. Farmington, MI: American Concrete Institute.
Malakooti, A., M. Maguire, and R. J. Thomas. 2018. Evaluating electrical resistivity as a performance based test for Utah bridge deck concrete (CAIT-UTC-NC35). Piscataway, NJ: Rutgers Univ. Center for Advanced Infrastructure and Transportation.
McDonald, J. E., A. M. Vaysburd, P. H. Emmons, R. W. Poston, and K. Kesner. 2002. “Selecting durable repair materials: Performance criteria—Summary.” Concr. Int. 24 (1): 37–44.
Mu, R., C. Miao, X. Luo, and W. Sun. 2002. “Interaction between loading, freeze–thaw cycles, and chloride salt attack of concrete with and without steel fiber reinforcement.” Cem. Concr. Res. 32 (7): 1061–1066. https://doi.org/10.1016/S0008-8846(02)00746-9.
Qi, C. 2003. Quantitative assessment of plastic shrinkage cracking and its impact on the corrosion of steel reinforcement. West Lafayette, IN: Purdue Univ.
Quezada, I. 2018. “Investigating rapid concrete repair materials and admixtures.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Utah State Univ.
Quezada, I., R. J. Thomas, and M. Maguire. 2018. “Internal curing to mitigate cracking in rapid set repair media.” Adv. Civ. Eng. Mater. 7 (4): 660–671. https://doi.org/10.1520/ACEM20170140.
Ram, P. V., J. Olek, and J. Jain. 2013. Field trials of rapid-setting repair materials. West Lafayette, IN: Joint Transportation Research Program, Indiana Dept. of Transportation and Purdue Univ.
Rizzo, E. M., and M. B. Sobelman. 1989. “Selection criteria for concrete repair materials.” Concr. Int. 11 (9): 46–49.
Thomas, R. J., M. Maguire, A. D. Sorensen, and I. Quezada. 2018. “Calcium sulfoaluminate cement.” Concr. Int. 40 (4): 65–69.
Tinic, C., and E. Brühwiler. 1985. “Effect of compressive loads on the tensile strength of concrete at high strain rates.” Int. J. Cem. Compos. Lightweight Concr. 7 (2): 103–108.
UDOT (Utah DOT). 2004. Concrete fast set repair materials bond (slant/shear) test. Taylorsville, UT: UDOT.
Vaysburd, A. M. 2006. “Holistic system approach to design and implementation of concrete repair.” Cem. Concr. Compos. 28 (8): 671–678. https://doi.org/10.1016/j.cemconcomp.2006.05.008.
Vaysburd, A. M., P. H. Emmons, N. P. Mailvaganam, J. E. McDonald, and B. Bissonnette. 2004. “Concrete repair technology—A revised approach is needed.” Concr. Int. 26 (1): 58–65.
Yang, Z., H. Brown, J. Huddleston, and W. Seger. 2016a. “Performance evaluation of rapid-set prepackaged cementitious materials for rehabilitation of surface distress of concrete transportation structures.” PCI J. 61 (2): 81–96. https://doi.org/10.15554/pcij.03012016.81.96.
Yang, Z., H. Brown, J. Huddleston, and W. Seger. 2016b. “Restrained shrinkage cracking and dry shrinkage of rapid-set prepackaged cementitious materials.” J. Mater. Civ. Eng. 28 (6): 04016014. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001504.
Yoon, S., K. Wang, W. J. Weiss, and S. P. Shah. 2000. “Interaction between loading, corrosion, and serviceability of reinforced concrete.” Mater. J. 97 (6): 637–644.
Zia, P. 1991. High performance concretes: A state-of-the-art report. Washington, DC: Strategic Highway Research Program, National Research Council.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Dec 16, 2021
Accepted: Feb 22, 2022
Published online: Apr 22, 2022
Published in print: Aug 1, 2022
Discussion open until: Sep 22, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ali Banaeipour, Mohammadreza Tavakkolizadeh, Muhammad Akbar, Zahoor Hussain, Krzysztof Adam Ostrowski, Alireza Bahadori, Mariusz Spyrka, Effects of Small Deviations in Fiber Orientation on Compressive Characteristics of Plain Concrete Cylinders Confined with FRP Laminates, Materials, 10.3390/ma16010261, 16, 1, (261), (2022).
- Kang Peng, Longliang Wu, Yousef Zandi, Alireza Sadighi Agdas, Ali Majdi, Nebojsa Denic, Aleksandar Zakić, Ahmed Abdel Khalek Ebid, Mohamed Amine Khadimallah, H. Elhosiny Ali, Application of Polyacrylic Hydrogel in Durability and Reduction of Environmental Impacts of Concrete through ANN, Gels, 10.3390/gels8080468, 8, 8, (468), (2022).