Experimental Study on Broken Area Evolution Characteristics and Crack Propagation Rules of Water Jet Impacting Concrete with Precracks
Publication: Journal of Performance of Constructed Facilities
Volume 35, Issue 1
Abstract
In the fields of concrete structure maintenance and emergency demolition, high-pressure water jet breaking technology shows a multitude of advantages, having broad application in future. The propagation rule of internal cracks in concrete is the fundamental issue of the high-pressure water jet concrete-breaking mechanism because it is related to the accuracy and safety of the technology and can promote its further development. In order to observe the propagation of cracks in concrete intuitively, transparent concrete-like materials with precracks were built in this study, and the transient process of broken area evolution and crack propagation under water jet impact in time and space was recorded with the help of a high-speed camera system. The results show that the existence of precracks significantly increases the efficiency and degree of water jet fracture, which manifests increasing the number of cracks, promoting the development of cracks in all directions, and enhancing the penetration speed. The vertical precracks can guide more failure in the axial direction of the water jet, and the horizontal precracks are beneficial to the crack propagation in the radial direction. More secondary cracks can be generated from the precracks, which will consume much more energy in the initiation and propagation of these cracks, resulting in the inadequate development of erosion hole dimension, compared to the concrete without precracks.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This project is supported by National Natural Science Foundation of China (No. 51608082), Chongqing Research Program of Basic Research and Frontier Technology (No. cstc2016jcyjA0374), and General Fund of Chongqing Natural Science Foundation (No. cstc2020jcyj-msxm3094).
References
Arola, D., and M. Ramulu. 1997. “Material removal in abrasive waterjet machining of metals surface integrity and texture.” Wear 210 (1–2): 50–58. https://doi.org/10.1016/S0043-1648(97)00087-2.
Bowden, F. P., and J. H. Brunton. 1958. “Damage to solids by liquid impact at supersonic speeds.” Nature 181 (4613): 873–875. https://doi.org/10.1038/181873a0.
Dehkhoda, S., and M. Hood. 2014. “The internal failure of rock samples subjected to pulsed water jet impacts.” Int. J. Rock Mech. Min. Sci. 66 (Feb): 91–96. https://doi.org/10.1016/j.ijrmms.2013.12.021.
Ding, X.-H., W. Zhou, X. Lu, and Y. Gao. 2018. “Physical simulation test of soil-rock mixture from synthetic transparent soil.” J. Cent. South Univ. 25 (12): 3085–3097. https://doi.org/10.1007/s11771-018-3976-4.
Dou, L.-B., Z.-H. Shen, G.-S. Li, J.-S. Fu, and H.-Z. Wang. 2012. “Research progress on ultra-high pressure jet drilling by down-hole pressure boost.” Spec. Oil Gas Reservoirs 19 (3): 151–158. https://doi.org/10.3969/j.issn.1006-6535.2012.03.001.
Foldyna, J., L. Sitek, B. Svehla, and S. Svehla. 2004. “Utilization of ultrasound to enhance high-speed water jet effects.” Ultrason. Sonochem. 11 (3–4): 131–137. https://doi.org/10.1016/j.ultsonch.2004.01.008.
Fu, J.-W., S.-L. Liu, W.-S. Zhu, H. Zhou, and Z.-C. Sun. 2018. “Experiments on failure process of new rock-like specimens with two internal cracks under biaxial loading and the 3-D simulation.” Acta Geotech. 13 (4): 853–867. https://doi.org/10.1007/s11440-018-0651-8.
Fu, J.-W., W.-S. Zhu, G.-H. Cao, W.-J. Xue, and K. Zhou. 2013. “Experimental study and numerical simulation of propagation and coalescence-process of a single three dimensional flaw in rocks.” J. China Coal Soc. 38 (3): 411–417. https://doi.org/10.13225/j.cnki.jccs.2013.03.003.
Germanovich, L. N., R. L. Salganik, A. V. Dyskin, and K. K. Lee. 1994. “Mechanics of brittle fracture with pre-existing cracks in compression.” Pure Appl. Geophys. 143 (1): 117–149. https://doi.org/10.1007/BF00874326.
Hashish, M. 1989a. “A model for abrasive-waterjet (AWJ) machining.” J. Eng. Mater. Technol. 111 (2): 154. https://doi.org/10.1115/1.3226448.
Hashish, M. 1989b. “Pressure effects in abrasive-waterjet (AWJ) machining.” J. Eng. Mater. Technol. 111 (3): 221. https://doi.org/10.1115/1.3226458.
Hlavacova, I. M., and V. Geryk. 2017. “Abrasives for water-jet cutting of high-strength and thick hard materials.” Int. J. Adv. Manuf. Technol. 90 (5–8): 1217–1224. https://doi.org/10.1007/s00170-016-9462-y.
Huang, Z.-Q., and L. Zhou. 2009. “On hydraulic auxiliary mechanical rock breaking mechanism in drilling.” J. Oil Gas Technol. 31 (3): 88–90. https://doi.org/10.3969/j.issn.1000-9752.2009.03.019.
Jiang, H.-X., C.-L. Du, S.-Y. Liu, and K.-D. Gao. 2014. “Numerical simulation of rock fragmentation under the impact load of water jet.” Shock Vib. 2014 (3): 1–11. https://doi.org/10.1155/2014/219489.
Jiang, H.-X., Z.-H. Liu, and K.-D. Gao. 2017. “Numerical simulation on rock fragmentation by discontinuous water-jet using coupled SPH/FEA method.” Powder Technol. 312 (May): 248–259. https://doi.org/10.1016/j.powtec.2017.02.047.
Kaminski, J., and B. Alvelid. 2000. “Temperature reduction in the cutting zone in water-jet assisted turning.” J. Mater. Process. Technol. 106 (1): 68–73. https://doi.org/10.1016/S0924-0136(00)00640-3.
Kulekci, M. K. 2002. “Processes and apparatus developments in industrial waterjet applications.” Int. J. Mach. Tools Manuf. 42 (12): 1297–1306. https://doi.org/10.1016/S0890-6955(02)00069-X.
Liu, J.-L., K.-Y. Li, and D. Zhang. 2019. “Broken area evolution characteristics and crack propagation rules of concrete under high-pressure water jet crushing.” J. Vib. Shock 38 (24): 131–137. https://doi.org/10.13465/j.cnki.jvs.2019.24.018.
Lu, Y.-Y., F. Huang, X.-C. Liu, and A. Xiang. 2015. “On the failure pattern of sandstone impacted by high-velocity water jet.” Int. J. Impact Eng. 76 (Feb): 67–74. https://doi.org/10.1016/j.ijimpeng.2014.09.008.
Momber, A., and H. Louis. 1994. “On the behaviour of concrete under water jet impingement.” Mater. Struct. 27 (3): 153–156. https://doi.org/10.1007/BF02473029.
Momber, A. W. 2000. “Concrete failure due to air-water jet impingement.” J. Mater. Sci. 35 (11): 2785–2789. https://doi.org/10.1023/A:1004782716707.
Okubo, S., K. Fukui, and K. Hashiba. 2008. “Development of a transparent triaxial cell and observation of rock deformation in compression and creep tests.” Int. J. Rock Mech. Min. Sci. 45 (3): 351–361. https://doi.org/10.1016/j.ijrmms.2007.05.006.
Richard, H. A., M. Fulland, and M. Sander. 2005. “Theoretical crack path prediction.” Fatigue Fract. Eng. Mater. Struct. 28 (1–2): 3–12. https://doi.org/10.1111/j.1460-2695.2004.00855.x.
Shanmugam, D. K., and S. H. Masood. 2009. “An investigation on kerf characteristics in abrasive waterjet cutting of layered composites.” J. Mater. Process. Technol. 209 (8): 3887–3893. https://doi.org/10.1016/j.jmatprotec.2008.09.001.
Sun, X.-Z., B. Shen, Y.-Y. Li, B.-L. Zhang, and N. Jiang. 2016. “Laboratory study of three-dimensional crack propagation in rock-like material under uniaxial compression.” Rock Mech. Rock Eng. 49 (10): 1–16. https://doi.org/10.1007/s00603-016-1033-x.
Tang, H.-D., Z.-D. Zhu, M.-L. Zhu, and H.-X. Lin. 2015. “Mechanical behavior of 3D crack growth in transparent rock-like material containing preexisting flaws under compression.” Adv. Mater. Sci. Eng. 2015: 1–10. https://doi.org/10.1155/2015/193721.
Tang, J.-R., Y.-Y. Lu, H.-J. Sun, Z.-L. Ge, and B.-W. Xia. 2016. “Study of erosion and damage characteristics of rock by abrasive water jet using CT.” Chin. J. Rock Mech. Eng. 35 (2): 297–302. https://doi.org/10.13722/j.cnki.jrme.2015.0881.
Tokar, G. 1990. “Experimental analysis of the elasto-plastic zone surrounding a borehole in a specimen of rock-like material under multiaxial pressure.” Eng. Fract. Mech. 35 (4): 879–887. https://doi.org/10.1016/0013-7944(90)90172-D.
Xue, Y.-Z., H. Si, and Q.-T. Hu. 2017. “The propagation of stress waves in rock impacted by a pulsed water jet.” Powder Technol. 320 (Oct): 179–190. https://doi.org/10.1016/j.powtec.2017.06.047.
Zeng, J.-Y., and T. J. Kim. 1996. “An erosion model of polycrystalline ceramics in abrasive waterjet cutting.” Wear 193 (2): 207–217. https://doi.org/10.1016/0043-1648(95)06721-3.
Zhu, S., Z.-H. Luo, Z.-D. Zhu, and Y.-F. Gao. 2019. “Construction of three-dimensional crack calculation method for transparent rock-like materials based on stereo vision principle.” Adv. Civ. Eng. 2019: 1–13. https://doi.org/10.1155/2019/2021092.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 24, 2020
Accepted: Jul 10, 2020
Published online: Oct 31, 2020
Published in print: Feb 1, 2021
Discussion open until: Mar 31, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.