Empirical Gas Explosion Models for Onshore Plant Structures: Review and Comparative Analysis
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 4
Abstract
In the onshore and offshore chemical industries, a gas explosion is a major accident in terms of damage scale and frequency. To prevent disastrous damages, the Task Committee on Design of Blast Resistant Buildings in Petrochemical Facilities of the ASCE suggested several empirical methods to determine gas explosion blast loads for the structural design of petrochemical facilities. However, the procedures for determining overpressure from gas explosion are not easy for practicing engineers to follow, due to the complexity of gas explosion mechanisms and numerous affecting factors. In addition, the blast loads are greatly influenced by the class or Mach number in the empirical methods, but high uncertainty exists in selecting a reasonable class or Mach number for preliminary design. In an effort to reduce the difficulty and ambiguity, this study provides a thorough review and comparative analysis of the empirical methods suggested by ASCE for determining overpressure from gas explosion. In addition, this paper presents a case study that demonstrates the determination of blast loads in accordance with the ASCE guidelines.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research was supported by the Nuclear Energy Development Program of National Research Foundation of Korea (NRF-2018M2A8A4083866) and from the Institute of Construction and Environmental Engineering at Seoul National University.
References
ASCE. 2010. Design of blast resistant buildings in petrochemical facilities. 2nd ed. Edited by W. L. Bounds. Reston, VA: ASCE.
Baker, Q. A., M. J. Tang, E. A. Scheier, and G. J. Silva. 1996. “Vapor cloud explosion analysis.” Process Saf. Prog. 15 (2): 106–109. https://doi.org/10.1002/prs.680150211.
Casal, J. 2007. Evaluation of the effects and consequences of major accidents in industrial plants. Oxford, UK: Elsevier Science.
CCPS (Center for Chemical Process Safety). 1994. Guidelines for evaluating the characteristics of vapor cloud explosions, flash fires, and BLEVEs. New York: American Institute of Chemical Engineers.
Harris, R. J., and M. J. Wickens. 1989. “Understanding vapor cloud explosions—An experimental study.” In Proc., 55th Autumn Meeting of the Institute of Gas Engineers. Derby, UK: Institute of Gas Engineers and Managers.
Kinsella, K. G. 1993. “A rapid assessment methodology for the prediction of vapour cloud explosion overpressure.” In Proc., Int. Conf. and Exhibition on Safety, Health and Loss Prevention in the Oil. Singapore: Society of Loss Prevention in the Oil and Chemical and Process Industries.
Lee, S., and J. Lee. 2012. “Building design for blast resistance.” [In Korean.] Rev. Archit. Build. Sci. 45 (10): 58–62.
Lenoir, E. M., and J. A. Davenport. 1993. “A survey of vapor cloud explosions: Second update.” Process Saf. Prog. 12 (1): 2–33. https://doi.org/10.1002/prs.680120104.
Melani, L., I. Sochet, X. Rocourt, and S. Jallais, and F. Josas. 2009. “Review of methods for estimating the overpressure and impulse resulting from a hydrogen explosion in a confined/obstructed volume.” In Proc., Int. Conf. of Hydrogen Safety. Reston, VA: ASCE.
OGP (International Association of Oil & Gas Producers). 2010. Risk assessment data director: Major accidents. London: OGP.
Pierorazio, A. J., J. K. Thomas, Q. A. Baker, and D. E. Ketchum. 2004. “An update to the Baker-Strehlow-Tang vapor cloud explosion prediction methodology flame speed table.” Process Saf. Prog. 24 (1): 59–65. https://doi.org/10.1002/prs.10048.
Ree, S. 2016. “Comparative analysis of empirical gas explosion models and blast resistant design of PC panels.” Master’s thesis, Dept. of Architecture and Architectural Engineering, Seoul National Univ.
Ree, S., and T. H.-K. Kang. 2015. “Determination of gas explosive blast loads and blast-resistant design of prestressed concrete structures.” In Proc., 7th Asia Pacific Young Researchers and Graduates Symp. Kuala Lumpur, Malaysia: Univ. of Malaya.
Roberts, M. W., and W. K. Crowley. 2004. “Evaluation of flammability hazards in non-nuclear safety analysis.” In Proc., Energy Facility Contractors Group (EFCOG) Safety Analysis Workshop. Las Vegas: Energy Facility Contractors Group.
Tang, M. J., and Q. A. Baker. 1999. “A new set of blast curves from vapor cloud explosion.” Process Saf. Prog. 18 (4): 235–240. https://doi.org/10.1002/prs.680180412.
Turner, T., and A. Sari. 2012. “Vapor cloud explosion prediction methods: Comparison of TNO multi-energy (ME) and Baker-Strehlow-Tang (BST) models in terms of vulnerability of structural damage caused by an explosion.” In Proc., ASCE Structures Congress 2012. Reston, VA: ASCE. https://doi.org/10.1061/9780784412367.017.
US Departments of the Army, Navy and Air Force. 1990. Design of structures to resist the effects of accidental explosions. Washington, DC: US Dept. of the Army, Navy and Air Force.
USDOD (US Department of Defense). 2008. Structures to resist the effects of accidental explosions. Washington, DC: US Army Corps of Engineers, Naval Facilities Engineering Command, Air Force Civil Engineer Support Agency.
Van Den Berg, A. W. 1985. “The multi-energy method: A framework for vapour cloud explosion blast prediction.” J. Hazard. Mater. 12 (1): 1–10. https://doi.org/10.1016/0304-3894(85)80022-4.
Information & Authors
Information
Published In
Journal of Performance of Constructed Facilities
Volume 34 • Issue 4 • August 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 30, 2019
Accepted: Feb 6, 2020
Published online: May 22, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 22, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.