Excessive Deflection in Long-Span Timber Beams of a Historical Building in the South of Italy: Analysis and Retrofitting Design
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 3
Abstract
In 2018, under service conditions, excessive deflections were observed in the long-span timber beams of the first floor of the former Sant’Elisabetta Monastery in Palermo (Italy). The building was constructed in the 16th century. Over the years, it underwent several modifications and, finally, in 1900, became a barrack. In the middle of the twentieth century, the monastery was submitted to maintenance works consisting of the reconstruction of the first floor with timber beams and the reconstruction of the roof with timber trusses. In the summer of 2018, anomalous and excessive deflections of the primary beams on the first floor approaching th of the span were observed, raising concerns. Therefore, an experimental investigation was carried out to establish the causes of the damage and to identify a retrofitting design. In this work, extensive experimental research was carried out to characterize the timber materials and structural members through static and dynamic tests. The results obtained represent support of a strengthening design for the timber beams, and the design’s main execution phases are described in this paper. The lesson learned from the case study could help professional engineers be aware of the main peculiarities and deficiencies of structural systems affected by material degradation—in this case, mainly depending on construction mistakes—and the importance of in situ periodical checks during the useful life of structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
Acknowledgments
We thank the architect Alessandro Basile, the engineers Vincenzo Gambino, Giuseppe Quartara, and Giuseppe Spitale of the Superintendence for Public Works in Sicily and Calabria, and the engineer Michele Infurna of 4 EMME, who carried out the tests.
References
Adam, J. M., and M. Buitrago. 2018. “Learning from failures in an emblematic building in Valencia, Spain.” Eng. Fail. Anal. 92 (Oct): 418–429. https://doi.org/10.1016/j.engfailanal.2018.06.023.
Biegus, A., and D. Madry. 2009. “Failure hazard and strengthening of roof in steel industrial building after explosion of electric furnace.” Eng. Fail. Anal. 16 (7): 2427–2432. https://doi.org/10.1016/j.engfailanal.2009.03.030.
Brencich, A. 2010. “Collapse of an industrial steel shed: A case study for basic errors in computational structural engineering and control procedures.” Eng. Fail. Anal. 17 (1): 213–225. https://doi.org/10.1016/j.engfailanal.2009.06.015.
BS EN. 2010. Timber structures: Product requirements for prefabricated structural members assembled with punched metal plate fasteners. Geneva: ISO.
Casagrande, D., I. Giongo, F. Pederzolli, A. Franciosi, and M. Piazza. 2018. “Analytical, numerical and experimental assessment of vibration performance in timber floors.” Eng. Struct. 168 (1): 748–758. https://doi.org/10.1016/j.engstruct.2018.05.020.
Cuartero, J., M. Cabaleiro, S. Hélder, J. Sousa, and M. Branco. 2019. “Tridimensional parametric model for prediction of structural safety of existing timber roofs using laser scanner and drilling resistance tests.” Eng. Struct. 185 (Apr): 58–67. https://doi.org/10.1016/j.engstruct.2019.01.096.
Fink, G., J. Kohler, and R. Brandner. 2018. “Application of European design principles to cross laminated timber.” Eng. Struct. 171 (15): 934–943. https://doi.org/10.1016/j.engstruct.2018.02.081.
Lopez-Molina, A., and G. Doudak. 2019. “Retrofit techniques for cross-laminated timber (CLT) elements subjected to blast loads.” Eng. Struct. 197 (15): 109450. https://doi.org/10.1016/j.engstruct.2019.109450.
Murta, A., J. Pinto, H. Varum, and J. M. Guedes. 2010. “Survey on the main defects in ancient buildings constructed mainly with natural raw materials.” In Proc., Portugal SB10, Sustainable Building, Affordable to All, Low Cost Sustainable Solutions. Amsterdam, Netherlands: Elsevier.
Pinto, J., H. Varum, and L. Ramos. 2011. “Two roofs of recent public buildings, the same technological failure.” Eng. Fail. Anal. 18 (2): 811–817. https://doi.org/10.1016/j.engfailanal.2011.01.001.
UNI EN. 2006. Durability of wood and wood-based products—Definition of classes of use—Part 1. Geneva: ISO.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Aug 31, 2019
Accepted: Nov 28, 2019
Published online: Apr 2, 2020
Published in print: Jun 1, 2020
Discussion open until: Sep 2, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.