Evaluation and Remedial Measures on Premature Failure of Roads in India
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 1
Abstract
The current study aims at evaluating the causes of premature failure of roads in India by field investigation along with suggesting remedial measures to mitigate the earlier deterioration with a cost-effective analytical approach. From the initial field investigation near the Satara District, the results show that the major failure of low-volume roads (LVRs) is mainly due to the heavy and overloaded vehicles which take the LVRs running parallel to the highways to avoid fee collection booths. In addition, the data related to the average annual rainfall, annual temperature, groundwater patterns, and soil patterns reported from the field investigation shows the diversities in natural and weather conditions that are the major cause of premature failure of LVRs. Along with field investigation, a two-dimensional finite element analysis is performed after authenticating the methodology with the reported case history to obtain the pavement response on critical parameters for variation in thickness and material properties of various constituent layers. The calculated results are then included as inputs to calculate the fatigue and rutting lives in terms of number of standard axles. The scope of work is extended to find the unknown nodal values along the decisive factors such as temperature, seepage pressures at various points, and gradients with the application of analytical tools. The results show that the weather changes and the natural parameters along with the overloading conditions are the major causes of premature failure of LVRs in India. Thus, to mitigate the earlier deterioration, it is suggested to have separate designs at various locations after finding the uncalculated nodal values along with the decisive factors such as temperature, seepage pressures at various points, and gradients with the application of the analytical tool.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 1993. AASHTO guide for the design of pavement structures. Washington, DC: AASHTO.
Abbas Ala, R., F. Andrew, and T. Papagiannakis Athanassios. 2014. “Effect of traffic load input level on mechanistic-empirical pavement design.” Transp. Res. Rec. 2443 (1): 63–77. https://doi.org/10.3141/2443-08.
Ahmed S., and K. S. Reddy. 2012. “Performance criteria for rural road pavements.” In Vol. 1 of Proc., Int. Conf. on Advances in Architecture and Civil Engineering (AARCV 2012). Coimbatore, India: Bonfring.
Ankit, G., P. Kumar, and R. Rastogi. 2014. “Mechanistic–empirical approach for the design of low volume pavements.” Int. J. Pavement Eng. 16 (9): 797–808. https://doi.org/10.1080/10298436.2014.960999.
Arnold, G. 2004. “Rutting of granular pavements.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Nottingham.
ASTM. 2011. Standard test method for determining the resilient modulus of bituminous mixtures by indirect tension test. ASTM D7369-09. West Conshohocken, PA: ASTM.
Austroads. 1995. A guide to the structural design of road pavements. Sydney, Australia: Austroads.
Austroads. 2004. The technical basis of Austroads pavement design guide. AP-T-33. Sydney, Australia: Austroads.
Avinash, N. R., H. N. Vinay, D. Prasad, S. V. Dinesh, and J. K. Dattatreya. 2014. Performance evaluation of low volume flexible pavements—A case study, 69–78. Reston, VA: ASCE.
Chakroborty, P., and D. Animesh. 2003. Principles of transportation engineering. Upper Saddle River, NJ: Prentice Hall.
Chandak, P. G., B. Tapase Anand, S. Sayyed Sabir, and C. Attar Abdulrashid. 2017. “A state-of-the-art review of different conditions influencing the behavioral aspects of flexible pavement.” In Advancement in the Design and Performance of Sustainable Asphalt Pavements, 300–312. Berlin: Springer.
Das, A. 2015. Analysis of pavement structures. Boca Raton, FL: CRC Press.
Desai, C. S., and J. F. Abel. 2005. Introduction to the finite element method- A numerical method for engineering analysis. Chennai, India: CBS Publishers.
Falla, G. C., S. Leischner, A. Blasl, and S. Erlingsson. 2017. “Characterization of unbound granular materials within a mechanistic design framework for low volume roads.” Transp. Geotech. 13 (Dec): 2–12. https://doi.org/10.1016/j.trgeo.2017.08.010.
Gabriel, B., R. Briggs, S. Saboundjian, and P. Ullidtz. 2015. “Seasonal effects on a low-volume road flexible pavement.” Transp. Res. Rec. 2510 (1): 81–89. https://doi.org/10.3141/2510-10.
Gupta A., P. Kumar, and R. Rastogi. 2010. “Field and laboratory investigations on subgrade layer of low volume roads.” In Proc., Indian Geotechnical Conf., 1019–1022. Mumbai, India: Indian Institute of Technology Bombay.
Hall, K. D., and J. W. Bettis. 2000. Development of comprehensive low volume pavement design procedures. Fayetteville, AR: Univ. of Arkansas.
Helwany, S., D. John, and J. Leidy. 1998. “Finite element analysis of flexible pavement.” J. Transp. Eng. 124 (5): 491–499. https://doi.org/10.1061/(ASCE)0733-947X(1998)124:5(491).
Henning Theunis, F. P., A. David, A. Greg, and L. Wei. 2014. “Relationship between traffic loading and environmental factors and low-volume road deterioration.” Transp. Res. Rec. 2433 (1): 100–107. https://doi.org/10.3141/2433-11.
HMSO (Her Majesty’s Stationery Office). 1994. Vol. 7 of Design manual for roads and bridges, pavement design and maintenance, foundations. London: Highways Agency.
IRC (Indian Roads Congress). 2002. Rural roads manual. IRC:SP:20. New Delhi, India: IRC.
IRC (Indian Roads Congress). 2007. Guidelines for the design of flexible pavements for low volume rural roads. IRC:SP:72. New Delhi, India: IRC.
IRC (Indian Roads Congress): 2012. Guidelines for the design of flexible pavements. IRC:37. New Delhi, India: IRC.
IRC (Indian Roads Congress). 2015. Guidelines for the design of flexible pavements for low volume rural roads. IRC:SP:72. New Delhi, India: IRC.
Isaac, H., and R. James. 2014. “Bottom-up fatigue cracking of low-volume flexible pavement analysis from instrumented testing.” Transp. Res. Rec. 2094 (1): 43–52. https://doi.org/10.3141/2094-05.
Kalliainen, A., P. Kolisoja, and V. Haakana. 2015. “Effect of tyre configuration on the performance of a low-volume road exposed to heavy axle loads.” Transp. Res. Rec. 2474 (1): 174–184. https://doi.org/10.3141/2474-21.
Minkwan, K., and E. Tutumluer. 2008. “Implications of complex axle loading and multiple wheel load interaction in low volume roads.” In Airfield and highway pavements. Reston, VA: ASCE.
MoRT&H (Ministry of Road Transport and Highways). 2010. Basic road statistics of India 2004–2008. Rep. by Transportation Research Wing. New Delhi, India: Government of India.
NCHRP (National Cooperative Highway Research Program). 2007. Evaluation of mechanistic-empirical design procedure. National Cooperative Highway Research Program. Washington, DC: National Research Council.
Ranadive, M. S., and B. Tapase Anand. 2016. “Parameter sensitive analysis of flexible pavement.” Int. J. Pavement Res. Technol. 9 (6): 466–472. https://doi.org/10.1016/j.ijprt.2016.12.001.
Shell. 1978. Shell pavement design manual. London: Shell International Petroleum Company.
Siddharthan Raj, V., E. Sebaaly Peter, M. El-Desouky, D. Strand, and D. Huft. 2005. “Heavy off-road vehicle tyre-pavement interaction and response” J. Transp. Eng. 131 (3): 239–247. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:3(239).
Suleiman, N., and A. Varma. 2007. “Modeling the response of paved low-volume roads under various traffic and seasonal conditions.” Transp. Res. Rec. 1989 (1): 230–236. https://doi.org/10.3141/1989-68.
Tapase, A., and M. Ranadive. 2016. “Performance evaluation of flexible pavement using finite element method.” In Proc., GeoChina 2016: Material, Design, Construction, Maintenance, and Testing of Pavement, 9–17. Reston, VA: ASCE.
Tawalare, A., and K. V. Raju. 2016. “Pavement performance index for Indian rural roads.” Perspect. Sci. 8 (Sep): 471. https://doi.org/10.1016/j.pisc.2016.04.101.
Tighe Susan, L., J. Smith, B. Mills, and J. Andrey. 2008. “Evaluating climate change impact on low-volume roads in Southern Canada.” Transp. Res. Rec. 2053 (1): 9–16. https://doi.org/10.3141/2053-02.
TRL (Transport Research Laboratory). 1993. “A guide to the structural design of bituminous surfaced roads in tropical and subtropical countries.” In Overseas road note 31. 4th ed. London: TRL.
Yang Huang, H. 2008. Pavement analysis and design. 2nd ed. London: Pearson Education.
Yoder, E. J., and M. W. Witczak. 1975. Principles of pavement design. 2nd ed. Hoboken, NJ: Wiley.
Zienkiewicz, O. C., and R. L. Taylor. 1991. Vol. 2 of The finite element method. New York: McGraw-Hill.
Zuo, G., E. C. Drumm, and R. W. Meier. 2007. “Environmental effects on the predicted service life of flexible pavements.” J. Transp. Eng. 133 (1): 47–56. https://doi.org/10.1061/(ASCE)0733-947X(2007)133:1(47).
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 13, 2018
Accepted: Jun 26, 2019
Published online: Dec 12, 2019
Published in print: Feb 1, 2020
Discussion open until: May 12, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.