Seismic Fragility Assessment and Resilience of Reinforced Masonry Flanged Wall Systems
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 1
Abstract
Several experimental and analytical studies have evaluated the seismic response of reinforced masonry (RM) shear walls either as a component (i.e., planar rectangular walls) or as a system (i.e., building consisting planar walls). In the current study, five RM flanged walls were assessed for their seismic performance and collapse capacity. The impact of utilizing flanged walls was assessed and characterized through recent available guidelines. In this respect, a 2-D fiber-based modeling approach has been developed using the Open System for Earthquake Engineering Simulation software. The results indicate that the selected RM flanged walls can satisfy the acceptable criteria proposed by the methodology. The seismic resilience of the archetypes against the expected collapse risk was evaluated in terms of functionality curves before and after the use of the flanges in the walls. Damage levels were considered as performance level functions correlated to earthquake intensity and were used to estimate total loss and recovery time of the archetypes. The selected RM flanged walls showed enhanced earthquake resilience and less damage than rectangular RM shear walls.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the support of the Natural Science and Engineering Research Council of Canada (NSERC), l’Association des entrepreneurs en maçonnerie du Québec (AEMQ), the Canadian Concrete Masonry Producers Association (CCMPA), and the Canadian Masonry Design Centre (CMDC).
References
Ahmadi, F., R. E. Marios Mavros, B. S. Klingner, and D. McLean. 2015. “Displacement-based seismic design for reinforced masonry shear-wall structures, Part 2: Validation with shake-table tests.” Earthquake Spectra 31 (2): 999–1019. https://doi.org/10.1193/120212EQS345M.
Arabzadeh, H., and K. Galal. 2017. “Seismic collapse risk assessment and FRP retrofitting of RC coupled C-shaped core walls using the FEMA-P695 methodology.” J. Struct. Eng. 143 (9): 4017096. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001820.
ASCE and SEI (Structural Engineering Institute). 2010. “Minimum design loads for buildings and other structures.” ASCE/SEI 7-10. Reston, VA: ASCE.
ASCE and SEI (Structural Engineering Institute). 2016. “Minimum design loads and associated criteria for buildings and other structures.” ASCE/SEI 7-16. Reston, VA: ASCE.
ASCE and SEI (Structural Engineering Institute). 2017. “Seismic evaluation and retrofit of existing buildings.” ASCE/SEI 41-17. Reston, VA: ASCE.
ATC (Applied Technology Council). 2009. “Background document: Damage states and fragility curves for reinforced masonry shear walls.” FEMA 58-1/BD 3.8.10. Washington, DC: FEMA.
Baker, J. W. 2015. “Code supplement to efficient analytical fragility function fitting using dynamic structural analysis.” Earthquake Eng. Res. Inst. 31 (1): 579–599. https://doi.org/10.1193/021113EQS025M.
Calabrese, A., J. Almeida, and R. Pinho. 2010. “Numerical issues in distributed inelasticity modeling of RC frame elements for seismic analysis.” J. Earthquake Eng. 14 (1): 38–68. https://doi.org/10.1080/13632461003651869.
Chang, G. A., and B. J. Mander. 1994. “Seismic energy based fatigue damage analysis of bridge columns: Part 1–Evaluation of seismic capacity.”. Buffalo, NY: State Univ. of New York.
Cimellaro, G. P., M. R. Andrei, and M. Bruneau. 2003. MCEER’ S vision on the seismic resilience of health care facilities. Buffalo, NY: State Univ. of New York.
Cimellaro, G. P., M. R. Andrei, and M. Bruneau. 2010. “Framework for analytical quantification of disaster resilience.” Eng. Struct. 32 (11): 3639–3649. https://doi.org/10.1016/j.engstruct.2010.08.008.
Cimellaro, G. P., A. M. Reinhorn, and M. Bruneau. 2006. “Quantification of seismic resilience.” In Proc., 8th US National Conf. on Earthquake Engineering. Buffalo, NY: Earthquake Engineering Research Institute and National Conference on Earthquake Engineering, Univ of Buffalo.
Coburn, A., and R. Spencer. 2002. Earthquake protection. Chichester, UK: Wiley.
El-Dakhakhni, W., and A. Ashour. 2017. “Seismic response of reinforced-concrete masonry shear-wall components and systems: State of the art.” J. Struct. Eng. 143 (9): 3117001 https://doi.org/10.1061/(ASCE)ST.1943-541X.0001840.
Ezzeldin, M., L. Wiebe, and W. El-Dakhakhni. 2016. “Seismic collapse risk assessment of reinforced masonry walls with boundary elements using the FEMA-P695 methodology.” J. Struct. Eng. 142 (11): 4016108 https://doi.org/10.1061/(ASCE)ST.1943-541X.0001579.
FEMA (Federal Emergency Management Agency). 2009. “Quantification of building seismic performance factors.” FEMA-P695. Washington, DC: FEMA.
FEMA (Federal Emergency Management Agency). 2012. “Seismic performance assessment of buildings.” FEMA P58-1. Washington, DC: FEMA.
FEMA (Federal Emergency Management Agency). 2015. Hazus–MH 2.1 Technical Manual. Accessed June 26, 2015. www.fema.gov/plan/prevent/hazus.
Furtado, A., H. Rodrigues, and A. Arêde. 2015. “Modelling of masonry infill walls participation in the seismic behavior of RC buildings using OpenSees.” Int. J. Adv. Struct. Eng. 7 (2): 117–127. https://doi.org/10.1007/s40091-015-0086-5.
Gogus, A., and W. J. Wallace. 2015. “Seismic safety evaluation of reinforced concrete walls through FEMA-P695 methodology.” J. Struct. Eng. 141 (10): 4015002 https://doi.org/10.1061/(ASCE)ST.1943-541X.0001221.
Heerema, P., A. Ashour, M. Shedid, and W. El-Dakhakhni. 2015a. “System-level displacement and performance-based seismic design parameter quantifications for an asymmetrical reinforced concrete masonry building.” J. Struct. Eng. 141 (11): 04015032. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001258.
Heerema, P., M. Shedid, D. Konstantinidis, and W. El-Dakhakhni. 2015b. “System-level seismic performance assessment of an asymmetrical reinforced concrete block shear wall building.” J. Struct. Eng. 141 (12): 4015047. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001298.
Kircher, C., G. Deierlein, J. Hooper, H. Krawinkler, S. Mahin, B. Shing, and J. Wallace. 2010. “Evaluation of the FEMA P-695 methodology for quantification of building seismic performance factors.” Rep. No. NISTGCR-10-917-8. Gaithersburg, MD: National Institute of Standards and Technology, NEHRP Consultants Joint Venture.
Kolozvari, K., and J. W. Wallace. 2016. “Practical nonlinear modeling of reinforced concrete structural walls.” J. Struct. Eng. 142 (12): G4016001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001492.
Lee, J., and J. Kim. 2013. “Seismic performance evaluation of staggered wall structures using FEMA-P695 procedure.” Mag. Concr. Res. 65 (17): 1023–1033. https://doi.org/10.1680/macr.12.00237.
Lignos, D. G., H. Krawinkler, and A. S. Whittaker. 2011. “Prediction and validation of sidesway collapse of two scale models of a 4-story steel moment frame.” Earthquake Eng. Struct. Dyn. 40 (7): 807–825. https://doi.org/10.1002/eqe.1061.
Mavros, M., F. Ahmadi, P. B. Shing, R. E. Klingner, D. McLean, and A. Stavridis. 2016. “Shake-table tests of a full-scale two-story shear-dominated reinforced masonry wall structure” J. Struct. Eng. 142 (10): 04016078. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001528.
McKenna, F., G. Fenves, and M. Scott. 2013. Computer program OpenSees: Open system for earthquake engineering simulation. Berkeley, CA: Pacific Earthquake Engineering Center, Univ. of California.
Menegotto, M., and P. E. Pinto. 1973. “Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending.” In Proc., Symp. on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, 15–22. Zurich, Switzerland: International Association for Bridge and Structural Engineering.
MSJC (Masonry Standards Joint Committee). 2013. Building code requirements for masonry structures.. Reston, VA: ASCE.
NRCC (National Research Council of Canada). 2015. National building code of Canada (NBCC-15). Ottawa: Institute for Research in Construction.
Purba, R., and M. Bruneau. 2014. “Seismic performance of steel plate shear walls considering two different design philosophies of infill plates. II: Assessment of collapse potential.” J. Struct. Eng. 141 (6): 04014161 https://doi.org/10.1061/(ASCE)ST.1943-541X.0001097.
Rodriguez, M. E., J. C. Botero, and J. Villa. 1999. “Cyclic stress-strain behavior of reinforcing steel including effect of buckling.” J. Struct. Eng. 125 (6): 605–612. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(605).
RS Means. 2017. Yardsticks for costing 2017: Canadian construction cost data. 158–163. Rockland, MA: RS Means.
Shedid, M. 2009. “Strategies to enhance seismic performance of reinforced concrete masonry shear walls.” Ph.D. thesis, Dept. of Civil Engineering, McMaster Univ.
Shedid, M. T., G. D. Robert, and W. D. Wael. 2008. “Behavior of fully grouted reinforced concrete masonry shear walls failing in flexure : Experimental results.” J. Struct. Eng. 134 (11): 1754–1767. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:11(1754).
Siyam, M., W. El-Dakhakhni, M. Shedid, and R. Drysdale. 2015a. “Seismic response evaluation of ductile reinforced concrete block structural walls. I: Experimental results and force-based design parameters.” J. Perform. Constr. Facil. 30 (4): 04015066. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000794.
Siyam, M. A., W. El-Dakhakhni, R. B. Bennett, and G. D. Robert. 2015b. “Seismic response evaluation of ductile reinforced concrete block structural walls. II : Displacement and performance-based design parameters.” J. Perform. Constr. Facil. 30 (4): 1–15. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000804.
Siyam, M. A., D. Konstantinidis, and W. El-Dakhakhni. 2016. “Collapse fragility evaluation of ductile reinforced concrete block wall systems for seismic risk assessment.” J. Perform. Constr. Facil. 30 (6): 04016047. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000895.
Stavridis, A., F. Ahmadi, M. Mavros, P. B. Shing, R. E. Klingner, and D. McLean. 2016. “Shake-table tests of a full-scale three-story reinforced masonry shear wall structure.” J. Struct. Eng. 142 (10): 04016074. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001527.
Thomsen, IV., H. John, and J. W. Wallace. 2004. “Displacement-based design of slender reinforced concrete structural walls—Experimental verification.” J. Struct. Eng. 130 (4): 618–630. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(618).
Tirca, L., O. Serban, L. Lin, M. Wang, and N. Lin. 2016. “Improving the seismic resilience of existing braced-frame office buildings.” J. Struct. Eng. 142 (8): C4015003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001302.
Vamvatsikos, D., and C. A. Cornell. 2002. “Incremental dynamic analysis.” Earthquake Eng. Struct. Dyn. 31 (3): 491–514. https://doi.org/10.1002/eqe.141.
Zhao, J., and S. Sritharan. 2007. “Modeling of strain penetration effects in fibre-based analysis of reinforced concrete structures.” ACI Struct. J. 104 (2): 133–141. https://doi.org/10.14359/18525.
Zong, Z., and S. Kunnath. 2008. “Buckling of reinforcing bars in concrete structures under seismic loads.” In Proc., 14th World Conf. on Earthquake Engineering. Tokyo: International Association for Earthquake Engineering.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 5, 2018
Accepted: Jun 20, 2019
Published online: Dec 10, 2019
Published in print: Feb 1, 2020
Discussion open until: May 10, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.