Failure Modes and Damage Processes of Vulnerable Stories in SRC-RC Hybrid Frames
Publication: Journal of Performance of Constructed Facilities
Volume 33, Issue 5
Abstract
For steel-reinforced concrete (SRC)–reinforced concrete (RC) hybrid frame structure, damage always appears in the transfer position of the section configuration from SRC to RC. To explore the failure modes and damage processes of vulnerable stories in SRC-RC hybrid frame structures, two SRC-RC frames, one only composed of the SRC-RC hybrid frame and the other filled with masonry walls, are tested quasi-statically. The damage index of the whole structure and structural members is calculated using the Park-Ang model. Furthermore, a weighted combination method to calculate the entire frame damage using the local members’ damage indexes is proposed in this paper based on redundancy theory. Finally, the weighted combination method is well matched with the Entire method according to the testing result. According to damage distribution for each structural member in vulnerable stories, some strengthen methods and construction measures are suggested.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was financially supported by the National Natural Science Foundation of China (NSFC) (Grant No. 51208175) and China Scholarship Council (CSC) (Grant No. 20180670149).
References
Azizinamini, A., and S. K. Ghosh. 1997. “Steel reinforced concrete structures in 1995 Hyogoken-Nanbu earthquake.” J. Struct. Eng. 123 (8): 986–992. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:8(986).
Banon, H., H. M. Irvine, and J. M. Biggs. 1981. “Seismic damage in reinforced concrete frames.” J. Struct. Div. 107 (9): 1713–1729.
Blandon, C. A. 2005. “Implementation of an infill masonry model for seismic assessment of existing buildings.” In Individual study. Pavia, Italy: European School for Advanced Studies in Reduction of Seismic Risk (ROSE School).
Chen, Z. P., J. J. Xu, J. Y. Xue, and N. Wang. 2015. “Deformation and energy-based seismic damage behavior of SRC specially shaped columns.” [In Chinese.] China Civ. Eng. J. 48 (8): 29–37.
Crisafulli, F. J. 1997. Seismic behaviour of reinforced concrete structures with masonry infills. Christchurch, New Zealand: Univ. of Canterbury Civil Engineering.
Du, D. S. 2015. “Research on seismic responses and damage of base isolated structure impacted by spectral characteristics of earthquake ground motion.” J. Vib. Shock 34 (20): 203–213.
Filippou, F. C., V. V. Bertero, and E. P. Popov. 1983. Effects of bond deterioration on hysteretic behaviour of reinforced concrete joints. Berkeley, CA: Earthquake Engineering Research Center, Univ. of California.
Frangopol, D. M., and J. P. Curley. 1987. “Effects of damage and redundancy on structural reliability.” J. Struct. Eng. 113 (7): 1533–1549. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:7(1533).
Gao, Y., and X. Liu. 2008. “Importance coefficients of components in evaluation of structure robustness.” Chin. J. Rock Mech. Eng. 27 (12): 2575–2584.
Ghosh, S., D. Datta, and A. A. Katakdhond. 2011. “Estimation of the Park-Ang damage index for planar multi-story frames using equivalent single-degree systems.” Eng. Struct. 33 (9): 2509–2524. https://doi.org/10.1016/j.engstruct.2011.04.023.
Izzuddin, B. A. 2010. “Robustness by design: Simplified progressive collapse assessment of building structures.” Stahlbau 79 (8): 556–564. https://doi.org/10.1002/stab.201001350.
Jiang, H., B. Fu, and L. Chen. 2015a. “Constant-damage yield strength spectra for RC structures using modified Park-Ang damage model.” Adv. Struct. Eng. 18 (6): 837–851. https://doi.org/10.1260/1369-4332.18.6.837.
Jiang, H., B. Fu, X. Lu, and L. Chen. 2015b. “Seismic damage assessment of RC members by a modified Park-Ang model.” Adv. Struct. Eng. 18 (3): 353–364. https://doi.org/10.1260/1369-4332.18.3.353.
Kensuke, K., C. Matsui, and J. Sakai. 2000. “An experimental study on seismic behavior of frame with SRC-RC mixed column and RC beam.” In Proc., Summaries of Technical Papers of Annual Meeting, 1291–1292. Tokyo: Architectural Institute of Japan.
Kimura, J., and Y. Shingu. 1998. “Structural performance of SRC-RC mixed member under cyclic bending moment and shear.” In Proc., Summaries of Technical Papers of Annual Meeting, 1067–1068. Tokyo: Architectural Institute of Japan.
Kimura, J., and Y. Shingu. 1999. “Structural performance of SRC-RC mixed member under cyclic bending moment and shear: Effects of axial reinforcements inserted in SRC-RC joint.” [In Japanese.] In Proc., Annual Meeting Architectural Institute of Japan. C-1, Structures III, Timber Structures Steel Structures Steel Reinforced Concrete Structures, 1067–1068. Tokyo: Architectural Institute of Japan.
Kitagawa, Y., and H. Hiraishi. 2004. “Overview of the 1995 Hyogo-Ken Nanbu earthquake and proposals for earthquake mitigation measures.” J. Jpn. Assoc. Earthquake Eng. 4 (3): 1–29. https://doi.org/10.5610/jaee.4.3_1.
Krajcinovic, D. 1996. “Damage mechanics.” Mech. Mater. 8 (89): 117–197.
Krätzig, W. B., I. F. Meyer, and K. Meskouris. 1989. “Damage evolution in reinforced concrete members under cyclic loading.” In Structural safety and reliability, 795–804. Reston, VA: ASCE.
Lee, S. W., S. H. Kim, and H. S. Mha. 2004. “Seismic retrofit prioritization of bridges based on damage risk and failure cost analysis.” In Proc., 13th World Conf. on Earthquake Engineering. Vancouver, Canada: Canadian Association for Earthquake Engineering.
Liu, Y., Z. Guo, and Q. Huang. 2010. “Experimental study of damage model for SRC columns.” J. Wuhan Univ. Technol 32 (9): 203–205.
Madas, P. J. 1993. “Advanced modelling of composite frames subject to earthquake loading.” Ph.D. dissertation, Imperial College London, Univ. of London.
Mander, J. B., M. J. N. Priestley, and R. Park. 1988. “Theoretical stress-strain model for confined concrete.” J. Struct. Eng. 114 (8): 1804–1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
Manohar, S., and S. Madhekar. 2015. Seismic design of RC buildings: Springer Transactions in Civil and Environmental Engineering. New Delhi, India: Springer.
Martínezrueda, J. E., and A. S. Elnashai. 1997. “Confined concrete model under cyclic load.” Mater. Struct. 30 (3): 139–147.
Menegotto, M., and P. E. Pinto. 1973. “Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending.” In Proc., IABSE Symp. on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, 15–22. Zurich, Switzerland: International Association for Bridge and Structural Engineering.
Minami, K., and J. Sakai, and C. Matsui. 2000. “Analysis of damage of steel reinforced concrete building frames by 1995 Hyogoken-Nanbu earthquake.” In Proc., 12th World Conf. on Earthquake Engineering (12WCEE). Tokyo: International Association for Earthquake Engineering.
Mohd, Y. M. 1994. “Nonlinear analysis of prestressed concrete structures under monotonic and cyclic loads.” Ph.D. thesis, Graduate Division, Univ. of California.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010a. Code for design of concrete structures. GB 50010. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010b. Technical specification for concrete structures of tall building. JGJ 3. Beijing: MOHURD.
Monti, G., C. Nuti, and S. Santini. 1996. Cyclic response of upgraded sections. Chieti, Italy: Univ. of Chieti.
Pandey, P. C., and S. V. Barai. 1997. “Structural sensitivity as a measure of redundancy.” J. Struct. Eng. 123 (3): 360–364. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:3(360).
Park, Y. J., and H. S. Ang. 1985. “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng. 111 (4): 740–757. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(740).
Park, Y. J., H. S. Ang, and S. K. Kunnatii. 1985. “Seismic damage analysis of reinforced concrete buildings.” In Stochastic methods in structural dynamics, 740–757. Berlin: Springer.
Roufaiel, M. S., and C. Meyer. 1987. “Reliability of concrete frames damaged by earthquakes.” J. Struct. Eng. 113 (3): 445–457. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:3(445).
Suzuki, H., H. Nishihara, Y. Matsuzaki, and K. Minami. 2000. “Structural performance of mixed member composed of steel reinforced concrete and reinforced concrete.” In Proc., 12th World Conf. on Earthquake Engineering (12WCEE). Tokyo: International Association for Earthquake Engineering.
Wieland, A., and C. M. Wallenburg. 2012. “Dealing with supply chain risks: Linking risk management practices and strategies to performance.” Int. J. Phys. Distrib. Logist. Manage. 42 (10): 887–905. https://doi.org/10.1108/09600031211281411.
Wu, K., J. Xue, Y. Nan, and H. Zhao. 2016. “Experimental research on seismic behavior of SRC-RC transfer columns.” Steel Compos. Struct. 21 (1): 157–175. https://doi.org/10.12989/scs.2016.21.1.157.
Wu, K., J. Xue, and H. Zhao. 2012a. “Stirrup arrangement and failure mode of SRC-RC transfer columns.” J. Earthquake Eng. Eng. Vib. 32 (5): 60–65.
Wu, K., M. Yang, P. Cao, H. Ge, and L. Zhang. 2012b. “Nonliner static analysis on SRC-RC vertical hybrid frame structure.” In Proc., 12th Int. Symp. on Structural Engineering (ISSE-12). Wuhan, People’s Republic of China: Huazhong Univ. Science and Technology.
Xia, Zh., J. Li, and J. Lin. 2015. “Seismic performance assessment of brick masonry structures with precast slabs based on deterioration of frequency.” Ind. Constr. 45 (4): 92–97.
Yamaguchi, M., J. Kimura, J. Chung, and A. Kawano. 2004. 22589 skeleton curve model of SRC-RC mixed column, 1177–1178. Tokyo: Architectural Institute of Japan.
Yamamoto, K. I., Y. Komiya, S. Kon-No, T. Imaizumi, K. Sugiyama, and K. Minami. 2000. “Experimental study on seismic capacity of composite column formed SRC and RC part.” In Proc., 12th World Conf. on Earthquake Engineering (12WCEE). Tokyo: International Association for Earthquake Engineering.
Yong, Y., G. Zixiong, and N. Jianguo. 2006. “Review of studies on seismic design of transition story of steel reinforced concrete (SRC) vertical hybrid structures.” Earthquake Resistant Eng. Retrofitting 34 (3): 399–404.
Zhao, Y., and Y. Shao. 2010. “Experimental study on seismic behavior of SRC-RC transfer columns with different constructional measures.” World Earthquake Eng. 26 (2): 119–124.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 3, 2018
Accepted: Feb 19, 2019
Published online: Aug 1, 2019
Published in print: Oct 1, 2019
Discussion open until: Jan 1, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.