Strain Monitoring on PHC Pipe Piles Based on Fiber Bragg Grating Sensors
Publication: Journal of Performance of Constructed Facilities
Volume 33, Issue 2
Abstract
Fiber Bragg grating (FBG) sensors emerged as a relatively new strain-sensing technology for civil engineering applications. This study presents a field test to assess the feasibility of FBG sensors in monitoring the strain profile of prestressed high-strength concrete (PHC) pipe piles during installation. Two open-ended PHC pipe piles were instrumented with FBG sensors and then driven into the ground using a hydraulic jacking machine. To measure the strain profile along the test piles, nine FBG sensors were arranged in a single optical fiber and then mounted on one pile at the opposite side to monitor the strain at different levels as a function of wavelength shift. The procedure for installing the FBG sensors along the PHC pipe piles is introduced first. Next, the distribution of the axial forces and average side shear stresses that were evaluated from the strain measurements of the FBG sensors are discussed. The field test results indicate that the FBG sensor system was suitable for monitoring the strain state of PHC pipe piles during installation. The axial forces and side shear stresses along the test piles were influenced significantly by the penetration depth and the local soil resistance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge that the work presented in this paper was supported by a grant from the National Natural Science Foundations of China (No. 51879246), and the Young Talent Program of Ocean University of China (No. 841712014).
References
Chen, C. S., and L. C. Hiew. 2006. “Performance of bored piles with different construction methods.” Proc. Inst. Civ. Eng. Geotech. Eng. 159 (3): 227–232. https://doi.org/10.1680/geng.2006.159.3.227.
Choi, S. S., S. B. Lee, D. H. Kim, Y. Liu, S. Zhang, and H. B. Lee. 1999. “Development of optical fiber grating sensor system for civil engineering structures.". Seoul: Ministry of Construction and Transportation.
Cosentino, P. J., W. V. Eckroth, and B. G. Grossman. 2003. “Analysis of fiber optic traffic sensors in flexible pavements.” J. Transp. Eng. 129 (5): 549–557. https://doi.org/10.1061/(ASCE)0733-947X(2003)129:5(549).
Deng, L., and C. S. Cai. 2007. “Applications of fiber optic sensors in civil engineering.” J. Struct. Eng. Mech. 25 (5): 577–596. https://doi.org/10.12989/sem.2007.25.5.577.
Ding, Y., P. Wang, and S. Yu. 2015. “A new method for deformation monitoring on H-pile in SMW based on BOTDA.” Measurement 70: 156–168. https://doi.org/10.1016/j.measurement.2015.02.027.
Doherty, P., et al. 2015. “Field validation of fibre Bragg grating sensors for measuring strain on driven steel piles.” Geotech. Lett. 5 (2): 74–79. https://doi.org/10.1680/geolett.14.00120.
Hill, K. O., Y. Fujii, D. C. Johnson, and B. S. Kawasaki. 1978. “Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication.” Appl. Phys. Lett. 32 (10): 647–649. https://doi.org/10.1063/1.89881.
Hill, K. O., and G. Meltz. 1997. “Fiber Bragg grating technology fundamentals and overview.” J. Lightwave Technol. 15 (8): 1263–1276. https://doi.org/10.1109/50.618320.
Klar, A., P. J. Bennett, K. Soga, R. J. Mair, P. Tester, R. Fernie, H. D. St John, and G. Torp-Peterson. 2006. “Distributed strain measurement for pile foundations.” Proc. Inst. Civ. Eng. Geotech. Eng. 159 (3): 135–144. https://doi.org/10.1680/geng.2006.159.3.135.
Kong, X., C. S. Cai, J. X. Hu, and W. Xiong. 2016. “Field application of an innovative bridge scour monitoring system with Fiber Bragg Grating sensors.” J. Aerosp. Eng. 30 (2): B4016008. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000654.
Kou, H. L., J. Chu, W. Guo, and M. Y. Zhang. 2016. “Field study of residual forces developed in pre-stressed high-strength concrete (PHC) pipe piles.” Can. Geotech. J. 53 (4): 696–707. https://doi.org/10.1139/cgj-2015-0177.
Kou, H. L., W. Guo, and M. Y. Zhang. 2015. “Pullout performance of GFRP anti-floating anchor in weathered soil.” Tunnelling Underground Space Technol. 49: 408–416. https://doi.org/10.1016/j.tust.2015.06.001.
Lam, D. K. W., and B. K. Garside. 1981. “Characterization of single-mode optical fiber filters.” Appl. Opt. 20 (3): 440–445. https://doi.org/10.1364/AO.20.000440.
Lee, W., W. Lee, and R. Salgado. 2006. “An application of fiber Bragg grating sensor to piles.” In Proc., GeoCongress: Geotechnical Engineering in the Information Technology Age, 1–6. Reston, VA: ASCE.
Lee, W., W. J. Lee, S. B. Lee, and R. Salgado. 2004. “Measurement of pile load transfer using the Fiber Bragg Grating sensor system.” Can. Geotech. J. 41 (6): 1222–1232. https://doi.org/10.1139/t04-059.
Lu, Y., B. Shi, G. Q. Wei, S. E. Chen, and D. Zhang. 2012. “Application of a distributed optical fiber sensing technique in monitoring the stress of precast piles.” Smart Mater. Struct. 21 (11): 115011. https://doi.org/10.1088/0964-1726/21/11/115011.
Matta, F., F. Bastianini, N. Galati, P. Casadei, and A. Nanni. 2008. “Distributed strain measurement in steel bridge with fiber optic sensors: Validation through diagnostic load test.” J. Perform. Constr. Facil. 22 (4): 264–273. https://doi.org/10.1061/(ASCE)0887-3828(2008)22:4(264).
Meltz, G., W. W. Morey, and W. H. Glenn. 1989. “Formation of Bragg gratings in optical fibers by a transverse holographic method.” Opt. Lett. 14 (15): 823–825. https://doi.org/10.1364/OL.14.000823.
Mohamad, H., K. Soga, P. J. Bennett, R. J. Mair, and C. S. Lim. 2012. “Monitoring twin tunnel interaction using distributed optical fiber strain measurements.” J. Geotech. Geoenviron. Eng. 138 (8): 957–967. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000656.
Pamukcu, S., F. Cetisli, S. Texier, C. Naito, and J. Toulouse. 2006. “Dynamic strains with brillouin scattering distributed fiber optic sensor.” In Proc., GeoCongress: Geotechnical Engineering in the Information Technology Age, 31–36. Reston, VA: ASCE.
Sirkis, J. S. 1999. “Fiber optic sensors for smart structures: Basics and applications.” In Proc., Short Course Note for the SPIE’s Int. Symp. on Smart Structures. Newport Beach, CA.
Zhang, L. M., and H. Wang. 2009. “Field study of construction effects in jacked and driven steel H-piles.” Geotechnique 59 (1): 63–69. https://doi.org/10.1680/geot.2008.T.029.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jun 24, 2016
Accepted: Aug 31, 2018
Published online: Jan 7, 2019
Published in print: Apr 1, 2019
Discussion open until: Jun 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.