Experimental and Numerical Evaluation of Reinforced Concrete Walls Retrofit Systems for Blast Mitigation
Publication: Journal of Performance of Constructed Facilities
Volume 33, Issue 2
Abstract
Various ductile sheet materials are currently being considered to retrofit existing concrete walls to mitigate the effects of external blast. In this paper, the blast mitigation of the soft and rigid sheet retrofit systems of reinforced concrete walls is studied. Different types of thin sheet retrofits, such as steel, rubber, polyurea, and polymer-fiber composite sheets, were examined by using a series of full-scale quasistatic tests to evaluate their static resistance. Finite-element modeling was performed to study the straining action of the wall elements, including the retrofit system. Nonlinear single-degree-of-freedom dynamic analysis was performed to calculate the blast response and study the mitigation effects of the various sheet materials considered. Experimental results showed that all retrofits exhibited significant energy absorption after a support rotation of 10°. Finite-element models were able to closely predict the static resistance function of these retrofitted walls. Parameters such as friction coefficient, end-connection gap due to slack in the sheet, and connection stiffness were investigated. It was found that by increasing the initial gap to account for slack, the membrane action is delayed, which increases the ductility of the wall and the area under the resistance-displacement curve. Increasing the friction and the stiffness of the end-connection increased the resistance and the overall energy absorption of the retrofitted wall system.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alsayed, S. H., H. M. Elsanadedy, Z. M. Al-Zaheri, Y. A. Al-Salloum, and H. Abbas. 2016. “Blast response of GFRP-strengthened infill masonry walls.” Constr. Build. Mater. 115 (1): 438–451. https://doi.org/10.1016/j.conbuildmat.2016.04.053.
ASTM. 2006. Vulcanized rubber and thermoplastic elastomers–tension. ASTM D412. West Conshohocken, PA: ASTM.
ASTM. 2010. Standard test methods for tension testing of metallic materials. ASTM E8/E8M. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard specification for deformed and plain carbon-steel bars for concrete reinforcement. ASTM A615/A615M. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39. West Conshohocken, PA: ASTM.
Carriere, M., P. J. Heffernan, R. G. Wight, and A. Braimah. 2009. “Behaviour of steel reinforced polymer (SRP) strengthened RC members under blast load.” Can. J. Civ. Eng. 36 (8): 1356–1365. https://doi.org/10.1139/L09-053.
Crawford, J. E., L. J. Malvar, J. W. Wesevich, J. Valancius, and A. D. Reynolds. 1997. “Retrofit of reinforced concrete structures to resist blast effects.” ACI Struct. J. 94 (4): 371–377.
Davidson, J. S., J. R. Porter, R. J. Dinan, M. I. Hammons, and J. D. Connell. 2004. “Explosive testing of polymer retrofit masonry walls.” J. Perform. Constr. Facil. 18 (2): 100–106. https://doi.org/10.1061/(ASCE)0887-3828(2004)18:2(100).
Desayi, P., and S. Krishnan. 1964. “Equation for the stress-strain curve of concrete.” J. Proc. 61 (3): 345–350.
Fitzmaurice, S. 2006. “Blast retrofit design of CMU walls using polymer sheets.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Missouri.
Fu, X., and D. D. L. Chung. 1998. “Interface between steel rebar and concrete, studied by electromechanical pull-out testing.” Compos. Interfaces 6 (2): 81–92. https://doi.org/10.1163/156855499X00314.
Ha, J. H., N. H. Yi, J. K. Choi, and J. H. J. Kim. 2011. “Experimental study on hybrid CFRP-PU strengthening effect on RC panels under blast loading.” Compos. Struct. 93 (8): 2070–2082. https://doi.org/10.1016/j.compstruct.2011.02.014.
Hoemann, J., J., Davidson, R., Dinan, B., Bewick, J., Wang, H., Ren, X., Wu, and C., Cai 2010. “Boundary condition behavior and connection design for retrofitted unreinforced masonry walls subjected to blast loads.” In Proc., Structures Congress 2010. Reston, VA: ASCE.
Jacques, E., M. Saatcioglu, and A. Lloyd. 2009. “Performance of CFRP retrofitted reinforced concrete slabs under blast shock waves.” In Proc., 8th Int. Conf. on Shock and Impact Loads on Structures, 345–352. Australia: National Library of Australia.
Johnson, R. 2008. Engineering analysis and design of polypropylene composite sheets for blast retrofit. Columbia, MO: Univ. of Missouri.
Kennedy, J. 2005. “Analytical and experimental evaluation of steel sheets for blast retrofit design.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Missouri.
Kim, J. H. J., N. H. Yi, S. B. Kim, J. K. Choi, and J. C. Park. 2009. “Experiment study on blast loading response of FRP-retrofitted RC slab structures.” In Proc., Second Official Int. Conf. of Int. Institution for FRP in Construction for Asia-Pacific Region, 533–538. Kingston, ON, Canada: International Institute for FRP in Construction, Dept. of Civil Engineering, Queen’s Univ.
Lu, B., P. Silva, A. Nanni, and J. Baird. 2005. “Retrofit for blast- resistant RC slabs with composite materials.” ACI Spec. Publ. 230: 1345–1361.
Moradi, L., J. Davidson, and R. Dinan. 2009. “Resistance definition for membrane retrofit concrete masonry walls subjected to blast.” In Proc., Structures Congress 2009, 1–10. Reston, VA: ASCE.
Mosalm, K. M., A. S. Mosallam, K. M. Mosalam, and A. S. Mosallam. 2001. “Nonlinear transient analysis of reinforced concrete slabs subjected to blast loading and retrofitted with CFRP composites.” Composites Part B 32 (8): 623–636. https://doi.org/10.1016/S1359-8368(01)00044-0.
Muenks, M. 2013. “Characterization of polymer-fiber composite sheet retrofits for blast mitigation.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Missouri.
Nam, J. W., H. J. Kim, S. B. Kim, N. H. Yi, and J. H. J. Kim. 2010. “Numerical evaluation of the retrofit effectiveness for GFRP retrofitted concrete slab subjected to blast pressure.” Compos. Struct. 92 (5): 1212–1222. https://doi.org/10.1016/j.compstruct.2009.10.031.
Nam, J.-W., H.-J. Kim, S.-B. Kim, J.-H. Jay Kim, and K. J. Byun. 2008. “Analytical study of finite element models for FRP retrofitted concrete structure under blast loads.” Int. J. Damage Mech. 18 (5): 461–490. https://doi.org/10.1177/1056789507088339.
National Institute of Building Sciences. 2000. Airblast protection retrofit for unreinforced concrete masonry walls. Washington, DC: National Institute of Building Sciences.
Oswald, C., and M. Bazan. 2014. “Performance and blast design for non-load bearing precast concrete panels.” In Proc., Structures Congress. Reston, VA: ASCE.
Salim, H. A., R. J. Dinan, and J. Kennedy. 2006. “Blast-retrofit of CMU walls using steel sheets.” In Proc., Structures Congress 2006, 1–10. Reston, VA: ASCE.
Seo, S. Y., L. Feo, and D. Hui. 2013. “Bond strength of near surface-mounted FRP plate for retrofit of concrete structures.” Compos. Struct. 95 (1): 719–727. https://doi.org/10.1016/j.compstruct.2012.08.038.
Tappmeyer, B. J. 2015. “Sheet retrofit systems for concrete slabs for blast mitigation.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Missouri.
USACE. 2008. Single degree of freedom structural response limits for antiterrorism design. Washington, DC: USACE.
US Department of Defense. 2008. DoD structures to resist the effects of accidental explosions. Washington, DC: US Dept. of Defense.
Wang, J., H. Ren, X. Wu, and C. Cai. 2017. “Blast response of polymer-retrofitted masonry unit walls.” Composites Part B 128 (1): 174–181. https://doi.org/10.1016/j.compositesb.2016.02.044.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 5, 2018
Accepted: Aug 30, 2018
Published online: Dec 31, 2018
Published in print: Apr 1, 2019
Discussion open until: May 31, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.