Optimal Charge Scheme Calculation for Multiring Blasting Using Modified Harries Mathematical Model
Publication: Journal of Performance of Constructed Facilities
Volume 33, Issue 2
Abstract
A new optimization method for optimal charge scheme calculation is proposed to reduce undesired phenomenon in ring blasting, including brow damage, overcrushing, and bulking yield, which are caused by the unreasonable distribution of blasting energy. First, all the feasible charge schemes are calculated by a traversal algorithm. Then fragment size value is predicted according to the blasting simulation program, which is based on a modified Harries mathematical model. Finally, the optimal charge scheme is selected by the and of fragment size value of the muck pile. The program is developed by Visual LISP on the AutoCAD platform. A case study illustrates the optimization procedure, and some field tests were conducted in Tonglvshan copper mine and Fankou mine to verify the feasibility of the program. The optimization method can play a positive role in brow protection. It can also obviously improve the muck pile fragment-size distribution.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research is partially supported by the National Natural Science Foundation Project of China (Grant No. 41807259), the State Key Laboratory of Safety and Health for Metal Mines (Grant No. 2017-JSKSSYS-04), the Shenghua Lieying Program of Central South University (Principle Investigator: Dr. Jian Zhou), the China Postdoctoral Science Foundation funded project (Grant No. 2017M622610), and the Natural Science Foundation of Hunan Province (Grant No. 2018JJ3693).
References
Blair, D. P. 2008. “Non-linear superposition models of blast vibration.” Int. J. Rock Mech. Mining Sci. 45 (2): 235–247. https://doi.org/10.1016/j.ijrmms.2007.05.002.
Blair, D. P. 2009. “Limitations of electronic delays for the control of blast vibration and fragmentation.” In Proc., 9th Int. Symp. on Rock Fragmentation by Blasting, 171. London: Taylor & Francis Group.
Blair, D. P., and A. Minchinton. 1996. “On the damage zone surrounding a single blasthole.” In Proc., Fifth Int. Symp. Rock Fragmentation by Blasting, 121–130. London: Taylor & Francis Group.
Cho, S. H., Y. Ogata, and K. Kaneko. 2003. “Strain-rate dependency of the dynamic tensile strength of rock.” Int. J. Rock Mech. Mining Sci. 40 (5): 763–777. https://doi.org/10.1016/S1365-1609(03)00072-8.
Darling, P. 2011. Vol. 1 of SME mining engineering handbook. Denver: SME.
Hagan, T. N. 1987. “Optimizing the yield and distribution of effective explosion energy in fans and rings of blastholes.” In Proc., AusIMM, Explosives in Mining Workshop. Melbourne, Australia: AusIMM.
Hardy, A. J., T. M. Ryan, and J. M. Kemeny. 1997. “Block size distribution of in situ rock masses using digital image processing of drill core.” Int. J. Rock Mech. Mining Sci. 34 (2): 303–307. https://doi.org/10.1016/S0148-9062(96)00058-7.
Harries, G. 1983. “The modelling of long cylindrical charges of explosive.” In Proc., 1st Int. Symp. on Rock Fragmentation by Blasting, edited by R. Holmberg and A. Rustan, 419–431. Luleå: Luleå Univ. of Technology.
Harries, G. 1990. “Development of a dynamic blasting simulation.” In Proc., Paper Presented at the 3rd Int. Symp. on Rock Fragmentation by Blasting. Melbourne, Australia: AusIMM.
Igathinathane, C., and U. Ulusoy. 2012. “Particle size distribution analysis of ground coal by machine vision ΣVolume approach.” In Proc., 27th Int. Mineral Processing Congress, 24–28. New Delhi, India: India International Mineral Processing Congress.
Jimeno, E. L., C. L. Jimino, and A. Carcedo. 1995. Drilling and blasting of rocks. Boca Raton, FL: CRC Press.
Johansson, D., and F. Ouchterlony. 2013. “Shock wave interactions in rock blasting: the use of short delays to improve fragmentation in model-scale.” Rock Mech. Rock Eng. 46 (1): 1–18. https://doi.org/10.1007/s00603-012-0249-7.
Koupouli, N. J., T. Belem, P. Rivard, and H. Effenguet. 2016. “Direct shear tests on cemented paste backfill-rock wall and cemented paste backfill-backfill interfaces.” J. Rock Mech. Geotech. Eng. 8 (4): 472–479. https://doi.org/10.1016/j.jrmge.2016.02.001.
Merkel, G., W. Cutler, T. C. Tao, P. Phillips, M. Twigg, and A. Walker. 2003. New cordierite diesel particulate filters for catalyzed and non-catalyzed applications. Washington, DC: Johnson Matthey.
Qi, C., A. Fourie, and X. Zhao. 2018. “Back-analysis method for stope displacements using gradient-boosted regression tree and firefly algorithm.” J. Comput. Civ. Eng. 32 (5): 04018031. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000779.
Saharan, M. R., H. S. Mitri, and J. L. Jethwa. 2006. “Rock fracturing by explosive energy: Review of state-of-the-art.” Int. J. Blasting Fragmentation 10 (1–2): 61–81. https://doi.org/10.1080/13855140600858792.
Schill, M., and J. Sjöberg. 2012. “Finite element simulations of blasting and fragmentation with precise initiation.” In Proc., Paper Presented at the 12th Int. LS-DYNA Users Conf. Dublin, OH: DYNAmore Corporation.
Schleifer, J., and B. Tessier. 2002. “Fragmentation assessment using the FragScan system: Quality of a blast.” Fragblast 6 (3–4): 321–331. https://doi.org/10.1076/frag.6.3.321.14049.
Shi, X. Z., J. Zhou, B. B. Wu, D. Huang, and W. Wei. 2012. “Support vector machines approach to mean block size of rock fragmentation due to bench blasting prediction.” Trans. Nonferrous Metals Soc. China 22 (2): 432–441. https://doi.org/10.1016/S1003-6326(11)61195-3.
Starfield, A. M., and J. M. Pugliese. 1968. “Compression waves generated in rock by cylindrical explosive charges: A comparison between a computer model and field measurements.” In Vol. 5 of Proc., Int. Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 65–77.
Wang, M. Z., X. Z. Shi, and J. Zhou. 2018a. “Charge design scheme optimization for ring blasting based on the developed Scaled Heelan model.” Int. J. Rock Mech. Mining Sci. 110: 199–209. https://doi.org/10.1016/j.ijrmms.2018.08.004.
Wang, M. Z., X. Z. Shi, and J. Zhou. 2018b. “Optimization charge scheme for multi-row ring blasting design adopting equilateral triangle layout based on modified Harries’ mathematical model from a fragmentation perspective: A case study.” In Proc., 5th GeoChina Conf. Cham, Switzerland: Springer.
Wang, M. Z., X. Z. Shi, J. Zhou, and X. Y. Qiu. 2018c. “Multi-planar detection optimization algorithm for the interval charging structure of large-diameter longhole blasting design based on rock fragmentation aspects.” Eng. Optim. 50 (12): 2177–2191. https://doi.org/10.1080/0305215X.2018.1439943.
Wang, Q. Z., W. Li, and X. L. Song. 2006. “A method for testing dynamic tensile strength and elastic modulus of rock materials using SHPB.” In Rock damage and fluid transport, Part I, 1091–1100. New York: Springer.
Yi, C., D. Johansson, U. Nyberg, and J. Sjöberg. 2013. “Numerical simulation for the influence of delay time on the rock fragmentation.” In Proc., 10th Int. Symp. on Rock Fragmentation by Blasting: Fragblast, edited by P. K. Singh and A. Sinha, 213–220. Boca Raton, FL: CRC Press.
Zhang, Q. B., and J. Zhao. 2014. “A review of dynamic experimental techniques and mechanical behaviour of rock materials.” Rock Mech. Rock Eng. 47 (4): 1411–1478. https://doi.org/10.1007/s00603-013-0463-y.
Zhang, Z. X. 2011. “Reducing eyebrow break caused by rock blasting in Malmberget mine.” Blasting Fragmentation 5 (1): 1–10.
Zhang, Z. X. 2014. “Effect of double-primer placement on rock fracture and ore recovery.” Int. J. Rock Mech. Mining Sci. 71: 208–216. https://doi.org/10.1016/j.ijrmms.2014.03.020.
Zhang, Z. X. 2016. Rock fracture and blasting: Theory and applications. 626. Oxford, UK: Butterworth-Heinemann.
Zhang, Z. X., and M. Wimmer. 2018. “A case study of dividing a single blast into two parts in sublevel caving.” Int. J. Rock Mech. Mining Sci. 104: 84–93. https://doi.org/10.1016/j.ijrmms.2018.02.002.
Zhou, J., X. Li, and X. Shi. 2012. “Long-term prediction model of rockburst in underground openings using heuristic algorithms and support vector machines.” Safety Sci. 50 (4): 629–644. https://doi.org/10.1016/j.ssci.2011.08.065.
Zou, D. 2016. Theory and technology of rock excavation for civil engineering. New York: Springer.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 26, 2018
Accepted: Aug 22, 2018
Published online: Jan 7, 2019
Published in print: Apr 1, 2019
Discussion open until: Jun 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.