Analysis of the Inspection, Diagnosis, and Repair of External Door and Window Frames
Publication: Journal of Performance of Constructed Facilities
Volume 31, Issue 6
Abstract
This paper presents the analysis of the anomalies of external door and window frames, based on the inspection of 295 frameworks, in a total of 96 buildings in various locations in Portugal. With these inspections it was possible to validate a classification system previously proposed, determine the most common types of anomalies, their probable causes, related diagnosis tests, and respective rehabilitation techniques. This study also allowed determining some of the most common features usually found in this type of nonstructural element and correlate them with their materials, characteristics, position and location, and filling an existing knowledge gap on the short- and long-term behavior of these construction elements, which can be found in every new and old building. The analysis of these data is presented in various charts, to facilitate their interpretation and help identify the conditioning parameters in the performance and durability of this type of nonstructural system.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the support of the CERIS-ICIST Research Institute, IST—University of Lisbon and FCT (Foundation for Science and Technology).
References
Amaro, B., Saraiva, D., de Brito, J., and Flores-Colen, I. (2013). “Inspection and diagnosis system of ETICS on walls.” Constr. Build. Mater., 47(Oct), 1257–1267.
Amaro, B., Saraiva, D., de Brito, J., and Flores-Colen, I. (2014). “Statistical survey of the pathology, diagnosis and rehabilitation of ETICS in walls.” J. Civil Eng. Manage., 20(4), 511–526.
Asif, M., Davidson, A., and Muneer, T. (2002). Life cycle of window materials—A comparative assessment, Millennium Fellow School of Engineering, Napier Univ., Edinburgh, Scotland.
BSI (British Standards Institution). (1993). “Glossary of terms used in terotechnology.” BS 3811:1993, London.
Delgado, A., de Brito, J., and Silvestre, J. D. (2013). “Inspection and diagnosis system for wood flooring.” J. Perform. Constr. Facil., 564–574.
Gaião, C., de Brito, J., and Silvestre, J. D. (2011). “Inspection and diagnosis of gypsum plasterboard walls.” J. Perform. Constr. Facil., 172–180.
Gaião, C., de Brito, J., and Silvestre, J. D. (2012). “Technical note: Gypsum plasterboard walls: Inspection, pathological characterization and statistical survey using an expert system.” Materiales de Construcción, 62(306), 285–297.
Garcez, N., Lopes, N., de Brito, J., and Sá, G. (2012a). “Pathology, diagnosis and repair of pitched roofs with ceramic tiles: Statistical characterisation and lessons learned from inspections.” Constr. Build. Mater., 36(Nov), 807–819.
Garcez, N., Lopes, N., de Brito, J., and Silvestre, J. D. (2012b). “System of inspection, diagnosis and repair of external claddings of pitched roofs.” Constr. Build. Mater., 35(Oct), 1034–1044.
Garcia, J., and de Brito, J. (2008). “Inspection and diagnosis of epoxy resin industrial floor coatings.” J. Mater. Civil Eng., 128–136.
Gonçalves, A., de Brito, J., and Amaro, B. (2015). “Systematic approach to inspect, diagnose and repair masonry walls.” J. Perform. Constr. Facil., 04014155.
HUD (U.S. Department of Housing, and Urban Development). (1999). Windows & doors. The rehab guide, Vol. 4, Washington, DC.
Kelley, S., Chiropolos, J., and Gustitus, D. (1996). “Window systems: Repair versus replacement.” ASTM STP 1258, ASTM, West Conshohoken, PA.
Lopez, C., Masters, F. J., and Bolton, S. (2011). “Water penetration resistance of residential window and wall systems subjected to steady and unsteady wind loading.” Build. Environ., 46(7), 1329–1342.
Mendonça, L. (2005). “Condensation in buildings.” Archit. Life, 63, 71–74 (in Portuguese).
Neto, N., and de Brito, J. (2011). “Inspection and defect diagnosis system for natural stone cladding.” J. Mater. Civil Eng., 1433–1443.
Neto, N., and de Brito, J. (2012). “Validation of an inspection and diagnosis system for anomalies in natural stone cladding (NSC).” Constr. Build. Mater., 30(1), 224–236.
Pereira, A., Palha, F., de Brito, J., and Silvestre, J. D. (2011). “Inspection and diagnosis system for gypsum plasters in partition walls and ceilings.” Constr. Build. Mater., 25(4), 2146–2156.
Pereira, A., Palha, F., de Brito, J., and Silvestre, J. D. (2014). “Diagnosis and repair of gypsum plaster coatings: Statistical characterization and lessons learned from a field survey.” J. Civil Eng. Manage., 20(4), 485–496.
Pires, R., de Brito, J., and Amaro, B. (2013). “Inspection, diagnosis and rehabilitation system of painted rendered façades.” J. Perform. Constr. Facil., 04014062.
Pires, R., de Brito, J., and Amaro, B. (2014). “Statistical survey of the inspection, diagnosis and repair of painted rendered façades.” Struct. Infrastruct. Eng., 11(5), 605–618.
Roy, O. (1989). Masonry stone: Technical guide No. 6, Service de l’urbanisme, Ville de Québec, Canada (in French).
Sá, G., Sá, J., de Brito, J., and Amaro, B. (2014). “Inspection and diagnosis system for rendered walls.” Int. J. Civil Eng., 12(2), 181–192.
Sá, G., Sá, J., de Brito, J., and Amaro, B. (2015). “Statistical survey on inspection, diagnosis and repair of wall renderings.” J. Civil Eng. Manage., 21(5), 623–636.
Santos, A., Vicente, M., de Brito, J., Flores-Colen, I., and Castelo, A. (2017). “Inspection, diagnosis and rehabilitation system of door and window frames.” J. Perform. Constr. Facil., 04016118.
Silvestre, J. D., and de Brito, J. (2007). “Technical note: Statistical analysis of defects of tiles’ joints.” Materiales de Construcción, 57(285), 85–92.
Silvestre, J. D., and de Brito, J. (2009). “Ceramic tiling inspection system.” Constr. Build. Mater., 23(2), 653–668.
Silvestre, J. D., and de Brito, J. (2010). “Inspection and repair of ceramic tiling within a building management system.” J. Mater. Civil Eng., 39–48.
Sims, C., and Powter, A. (2006). “Repair or replace. Windows in historic buildings: Arriving at a sustainable solution.” Heritage Canada Magazine, 9(3), 40–49.
Tavares, A., Costa, A., and Varum, H. (2011). Handbook of rehabilitation and maintenance of buildings—Intervention guide, Dept. of Civil Engineering, Univ. of Aveiro, Aveiro, Portugal (in Portuguese).
Tutton, M., and Hirst, E. (2007). Windows—History, repair and conservation, Donhead Publishing Ltd., Dorset, U.K.
Walter, A., de Brito, J., and Lopes, J. (2005). “Current flat roof bituminous membranes waterproofing systems—Inspection, diagnosis and pathology classification.” Constr. Build. Mater., 19(3), 233–242.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 3, 2016
Accepted: May 10, 2017
Published online: Aug 18, 2017
Published in print: Dec 1, 2017
Discussion open until: Jan 18, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.