Vibration Behavior of Prestressed Cable Reinforced Concrete Truss System Caused by Jumping and Hopping
Publication: Journal of Performance of Constructed Facilities
Volume 31, Issue 5
Abstract
Jumping and hopping are considered the most severe human loading scenario for stadiums and gymnasiums. Recent design methods examine floor vibration by requiring knowledge of the dynamic characteristics of the floor structure (i.e., peak acceleration and fundamental frequency). However, these standards do not include a long and light structure such as the prestressed cable reinforced concrete truss (PCT) system considered in this study. Therefore, accurate assessment of the vibration behavior of such structures subjected to jumping and hopping is warranted. An experimental study (lab and in situ) aiming to investigate the vibrational properties and dynamic response of PCT floor systems was conducted. This study involves both jumping and hopping tests for verifying whether the characteristics are vibration acceptable. The measured responses of the floor systems were evaluated against the ISO 2631-2 limit for maximum acceleration. Lastly, a more rational method for determining fundamental frequency and peak acceleration is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support provided by the National Natural Science Foundation of China (Grant No. 51378244).
References
AISC/CISC (Canadian Institute of Steel Construction). (1997). Steel design guide series No. 11: Floor vibrations due to human activity, Chicago.
ATC (Applied Technology Council). (1999). ATC design guide 1: Minimizing floor vibration, Redwood, CA.
Bachmann, H., and Ammann, W. (1987). “Vibration in structures induced by man and machines.” Can. J. Civ. Eng., 15(6), 1086–1087.
BSI (British Standards Institution). (2008). “Guide to evaluation of human exposure to vibration in buildings. Part I: Vibration sources other than blasting.”, London.
Chen, Y., and Aswad, A. (1994). “Vibration characteristics of double tee building floors.” PCI J., 39(1), 84–95.
Chopra, A. K. (2001). Dynamics of structures: Theory and applications to earthquake engineering, 2nd Ed., Prentice-Hall, Upper Saddle River, NJ.
Clough, R. W., and Penzien, J. (2003). Dynamics of structures, 3rd Ed., Computers and Structures, Berkeley, CA.
Concrete Society. (1994). “Post-tensioned concrete floors: Design handbook.”, Singapore.
Davis, B., and Murray, T. M. (2009). “Slender monumental stair vibration serviceability.” J. Archit. Eng., 111–121.
Dolan, J. D., Murray, T. M., Johnson, J. R., Runte, D., and Shue, B. C. (1999). “Preventing annoying wood floor vibrations.” J. Struct. Eng., 19–24.
Ebrahimpour, A., and Sack, R. L. (1989). “Modeling dynamic occupant loads.” J. Struct. Eng., 1476–1496.
Gentile, C., and Gallino, N. (2008). “Ambient vibration testing and structural evaluation of an historic suspension footbridge.” Adv. Eng. Software, 39(4), 356–366.
ISO. (1989). “Mechanical vibration and shock—Evaluation of human exposure to whole-body vibration. Part II: Vibration in buildings (1Hz to 80Hz).”, Geneva.
Kim, J. T., Park, J. H., Hong, D. S., and Park, W. S. (2010). “Hybrid health monitoring of prestressed concrete girder bridges by sequential vibration-impedance approaches.” Eng. Struct., 32(1), 115–128.
Parnell, R., Davis, B. W., and Xu, L. (2010). “Vibration performance of lightweight cold-formed steel floors.” J. Struct. Eng., 645–653.
Pavic, A., and Reynolds, P. (2002). “Vibration serviceability of long-span concrete building floors. Part I: Review of background information.” Shock Vibr. Digest, 34(3), 191–211.
Pavic, A., and Reynolds, P. (2003). “Modal testing and dynamic FE model correlation and updating of a prototype high-strength concrete floor.” Cem. Concr. Compos., 25(7), 787–799.
Racic, V., and Pavic, A. (2009). “Mathematical model to generate asymmetric pulses due to human jumping.” J. Eng. Mech., 1206–1211.
Racic, V., and Pavic, A. (2010). “Mathematical model to generate near-periodic human jumping force signals.” Mech. Syst. Signal Process., 24(1), 138–152.
Reynolds, P., and Pavic, A. (2003). “Effects of false floors on vibration serviceability of building floors. Part II: Response to pedestrian excitation.” J. Perform. Constr. Facil., 87–96.
Setareh, M. (2012). “Vibrations due to walking in a long-cantilevered office building structure.” J. Perform. Constr. Facil., 255–270.
Smith, A. L., Hicks, S. J., and Devine, P. J. (2009). Design of floors for vibration: A new approach (SCI P354), Steel Construction Institute, Silwood Park, Ascot, U.K.
Thomson, W. T. (1972). Theory of vibration with application, Prentice-Hall, Englewood Cliffs, NJ.
Timoshenko, S., and Woinowsky-Krieger, S. (1959). Theory of plates and shells, 2nd Ed., McGraw-Hill, New York.
Tuan, C. Y., and Saul, W. E. (1985). “Loads due to spectator movements.” J. Struct. Eng., 418–434.
Zheng, T., Ji, T., and Ellis, B. R. (2010). “The significance of continuity in a multi-panel composite floor.” Eng. Struct., 32(1), 184–194.
Zhou, X., Cao, L., Chen, Y., Liu, J., and Li, J. (2016a). “Acceleration response of prestressed cable RC truss floor system subjected to heel-drop loading.” J. Perform. Constr. Facil., 04016014.
Zhou, X., Cao, L., Chen, Y., Liu, J., and Li, J. (2016b). “Experimental and analytical studies on the vibration serviceability of pre-stressed cable RC truss floor systems.” J. Sound Vibr., 361(20), 130–147.
Zhou, X., Li, J., and Liu, J. (2015). “Vibration of prestressed cable RC truss floor system due to human activity.” J. Struct. Eng., 142(5), 04015170-1–04015170-10.
Živanović, S., Pavic, V., and Reynolds, P. (2005). “Vibration serviceability of footbridges under human-induced excitation: A literature review.” J. Sound Vibr., 279(1–2), 1–74.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Aug 21, 2016
Accepted: Jan 24, 2017
Published online: May 8, 2017
Published in print: Oct 1, 2017
Discussion open until: Oct 8, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.