Effect of Ductile Detailing on the Performance of a Reinforced Concrete Building Frame Subjected to Earthquake and Fire
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 5
Abstract
A nonductile reinforced concrete (RC) frame was constructed and was subjected to a predefined level of damage by subjecting the frame to simulated earthquake loading. The damaged RC frame was then subjected to 1-h designed compartment fire. The RC frame was instrumented with a number of sensors that recorded strains, displacements, and temperatures during the test. The resulting data provided a distinctive record of earthquake-damaged RC structures in fire through a complete heating–cooling cycle. The experimental results were compared with the results from an earlier test done on the RC frame having ductile detailing. The results show a marked influence of reinforcement detailing on the postearthquake fire performance of the concrete structures. The simulated earthquake loading caused wider cracks and more severe concrete spalling in the frame without ductile detailing compared to the frame with ductile detailing. The fire damage was also more pronounced with extensive spalling due to the attainment of higher temperatures in the structural elements of RC frame constructed with nonductile detailing than the frame having ductile detailing.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work has been funded by a research grant from the Board of Research in Nuclear Sciences (BRNS), Mumbai.
References
Bailey, C. (2002). “Holistic behaviour of concrete buildings in fire.” Proc. Inst. Civ. Eng. Struct. Build., 152(3), 199–212.
BIS (Bureau of Indian Standards). (1987a). “Code of practice for design loads (other than earthquake) for buildings and structures.” IS 875 (Part 1), New Delhi, India.
BIS (Bureau of Indian Standards). (1987b). “Code of practice for design loads (other than earthquake) for buildings and structures. Part 2: Imposed loads.” IS 875 (Part 2), New Delhi, India.
BIS (Bureau of Indian Standards). (1993). “Ductile detailing of reinforced concrete structures subjected to seismic forces-code of practice (reaffirmed 2008).” IS 13920, New Delhi, India.
BIS (Bureau of Indian Standards). (2000). “Code of practice for plain and reinforced concrete.” IS 456, New Delhi, India.
BIS (Bureau of Indian Standards). (2002). “General provisions and buildings: Criteria for earthquake resistant design of structures.” IS 1893(Part 1), New Delhi, India.
BSI. (2002). “Eurocode 1: Actions on structures—Part 1-2: General actions—Actions on structures exposed to fire.” EN 1991-1-2, European Committee for Standardisation, Brussels, Belgium.
Chen, W. F., and Scawthorn, C. (2003). “New directions in civil engineering.” Chapter 29, Earthquake engineering handbook, CRC, Boca Raton, FL.
FEMA (Federal Emergency Management Agency). (2000). “Prestandard and commentary for the seismic rehabilitation of buildings.” FEMA 356, Building Seismic Safety Council, Washington, DC.
Hansen, G. (2015). “Timeline of the San Francisco earthquake.” 〈http://sfmuseum.net/hist10/06timeline.html〉 (Mar. 20, 2015).
ISO. (1975). “Fire resistance tests. Elements of building construction.” ISO 834, Geneva.
Kamath, P. (2014). “Response of RC framed structures subject to post-earthquake fire.” Ph.D. thesis, Dept. of Civil Engineering, IIT Roorkee, Roorkee, Uttarakhand, India.
Liel, A., Haselton, C., and Deierlein, G. (2011). “Seismic collapse safety of reinforced concrete buildings. II: Comparative assessment of nonductile and ductile moment frames.” J. Struct. Eng., 492–502.
Mansour, M. Y., Hsu, T. T. C., and Lee, J. Y. (2002). “Pinching effect in hysteretic loops of R/C shear elements.” ACI Spec. Publ., 205, 293–322.
Sharma, U. K., et al. (2012). “Full-scale testing of a damaged reinforced concrete frame in fire.” Proc. Inst. Civ. Eng. Struct. Build., 165(SB7), 335–346.
Suppasri, A., Shuto, N., Imamura, F., Koshimura, S., Mas, E., and Yalciner, A. C. (2013). “Lessons learned from the 2011 Great East Japan tsunami: Performance of tsunami countermeasures, coastal buildings, and tsunami evacuation in Japan.” Pure Appl. Geophys., 170(6–8), 993–1018.
Thomas, P. H., and Heselden, A. J. M. (1972). “Fully developed fires in single compartments.”, Fire Research Station, Watford, U.K.
Usmani, A. S. (2008). “Research priorities for maintaining structural fire resistance after seismic damage.” Proc., 14th World Conf. on Earthquake Engineering, Beijing.
Vecchio, F. J., and Sato, J. A. (1990). “Thermal gradient effects in reinforced concrete frame structures.” ACI Struct. J., 87(3), 262–275.
Wellington Lifeline Group. (2002). “Fire following earthquake: Identifying key issues for New Zealand. Report on a project undertaken for the New Zealand fire service contestable research fund.”, New Zealand Fire Service Commission, Wellington, New Zealand.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 11, 2015
Accepted: Jan 4, 2016
Published online: Mar 30, 2016
Discussion open until: Aug 30, 2016
Published in print: Oct 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.