Acceleration Response of Prestressed Cable RC Truss Floor System Subjected to Heel-Drop Loading
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 5
Abstract
This paper describes and discusses the vibration serviceability of the innovative prestressed cable-reinforced concrete truss (i.e., prestressed cable RC truss, PCT for abbreviation) floor system subjected to heel-drop impact loading, based on the theoretical and experimental studies. In the theoretical analysis, the PCT floor system is idealized as an anisotropic rectangular plate with four built-in edges and the weighted residual method was used. A field test was carried out to investigate the dynamic characteristics of the PCT floor system and to validate and demonstrate the convergence of the theoretical solution. As a result, the experimental results agree well with the theoretical ones. The decrease of vibration is dramatic in the direction perpendicular to the PCT girder and is at a slower rate along the direction of the girder. The investigated PCT floor system has a low fundamental natural frequency () with low damping ratio (). According to one standard of vibration criteria, the innovative floor system exhibits satisfactory vibration perceptibility.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support provided by the National Natural Science Foundation of China (51378244, 51438001).
References
Abeysinghe, C. M., Thambiratnam, D. P., and Perera, N. J. (2013). “Dynamic performance characteristics of an innovative hybrid composite floor plate system under human-induced loads.” Compos. Struct., 96, 590–600.
AISC/CISC (American/Canada Institute of Steel Construction). (1997). Steel design guide series No. 11: Floor vibrations due to human activity, Chicago.
Cao, G. X. (1983). Vibration of elastic rectangular thin plate, China Architecture and Building Press, Beijing. (in Chinese).
Carroll, S. P., Owen, J. S., and Hussein, M. F. M. (2013). “A coupled biomechanical/discrete element crowd model of crowd-bridge dynamic interaction and application to the Clifton Suspension Bridge.” Eng. Struct., 49, 58–75.
Chen, J., Xu, R., and Zhang, M. (2014). “Acceleration response spectrum for predicting floor vibration due to occupant walking.” J. Sound Vib., 333(15), 3564–3579.
Chen, Y. (1999). “Finite element analysis for walking vibration problems for composite precast building floors using ADINA: Modeling, simulation, and comparison.” Comput. Struct., 72(1–3), 109–126.
Chopra, A. K., Xie, L. L., and Lv, D. G. (2007). Dynamics of structures theory and application to earthquake engineering, 2nd Ed., Higher Education Press, Beijing. (in Chinese).
CS (Concrete Society). (1994). “Post-tensioned concrete floors: Design handbook.”.
Gonilha, J. A., Correia, J. R., and Branco, F. A. (2013). “Dynamic response under pedestrian load of a GFRP-SFRSCC hybrid footbridge prototype: Experimental tests and numerical simulation.” Compos. Struct., 95, 453–463.
He, X. T., Cao, L., Li, Z. Y., Hu, X. J., and Sun, J. Y. (2013). “Nonlinear large deflection problems of beams with gradient: A biparametric perturbation method.” Appl. Math. Comput., 219(14), 7493–7513.
He, X. T., Cao, L., Sun, J. Y., and Zheng, Z. L. (2014). “Application of a biparametric perturbation method to large-deflection circular plate problems with a bimodular effect under combined loads.” J. Math. Anal. Appl., 420(1), 48–65.
Hessari, P. (2014). “First order system least squares method for the interface problem of the Stokes equations.” Comput. Math. Appl., 68(3), 309–324.
Hosseini, S. M., Sladek, J., and Sladek, V. (2014). “Two dimensional transient analysis of coupled non-Fick diffusion-thermoelasticity based on Green-Naghdi theory using the meshless local Petrov-Galerkin (MLPG) method.” Int. J. Mech. Sci., 82, 74–80.
Ji, H. S., Son, B. J., and Chang, S. Y. (2007). “Field testing and capacity-ratings of advanced composite materials short-span bridge superstructures.” Compos. Struct., 78(2), 299–307.
Jia, H. S. (2000). “Analysis of transverse runout in rotating flexible disks by using Galerkin’s method.” Int. J. Mech. Sci., 42(2), 237–248.
Jin, G. Y., Su, Z., Ye, T. G., and Jia, X. Z. (2014). “Three-dimensional vibration analysis of isotropic and orthotropic conical shells with elastic boundary restraints.” Int. J. Mech. Sci., 89, 207–221.
Kim, S. B., Lee, Y. H., Scanlon, A., Kim, H., and Hong, K. (2008). “Experimental assessment of vibration serviceability of stair systems.” J. Constr. Steel Res., 64(2), 253–259.
Lee, C. M., Yang, D. Y., and Kim, M. U. (1990). “Numerical analysis of three-dimensional extrusion of arbitrarily shaped sections by the method of weighted residuals.” Int. J. Mech. Sci., 32(1), 65–82.
Li, J. (2012). Research on static test of pre-stressed reinforced concrete rigid-frame beam with draped tendons, Lanzhou Univ., Lanzhou, China. (in Chinese).
Li, Q., Fan, J. S., Nie, J. G., Li, Q. W., and Chen, Y. (2010). “Crowd- induced random vibration of footbridge and vibration control using multiple tuned mass dampers.” J. Sound Vib., 329(19), 4068–4092.
Murray, T. M. (1975). “Design to prevent floor vibrations.” Eng. J., 12(3), 82–87.
Ohmart, R. D. (1968). “An approximate method for the response of stiffened plates to a periodic excitation.”, Center for Research in Engineering Science, Univ. of Kansas, Lawrence, KS.
Pedersen, L., and Frier, C. (2010). “Sensitivity of footbridge vibrations to stochastic walking parameters.” J. Sound Vib., 329(13), 2683–2701.
Piccardo, G., and Tubino, F. (2008). “Parametric resonance of flexible foot bridges under crowed-induced lateral excitation.” J. Sound Vib., 311(1–2), 353–371.
Reddy, J. N. (1993). An introduction to the finite element method, 2nd Ed., McGraw-Hill, New York.
Setareh, M. (2012). “Vibrations due to walking in a long-cantilevered office building structure.” J. Perform. Constr. Facil., 255–270.
Smith, A. L., Hicks, S. J., and Devine, P. J. (2009). Design of floors for vibration: A new approach, Steel Construction Institute, Ascot, U.K.
Varela, W. D., and Battista, R. C. (2011). “Control of vibrations induced by people walking on large span composite floor decks.” Eng. Struct., 33(9), 2485–2494.
Veiga, L. B. D., Lovadina, C., and Reali, A. (2012). “Avoiding shear locking for the Timoshenko beam problem via isogeometric collocation methods.” Comput. Methods Appl. Mech. Eng., 241–244, 38–51.
Zhou, X. H., Cao, L., Chen, Y. F., Liu, J. P., and Li, J. (2016). “Experimental and analytical studies on the vibration serviceability of pre-stressed cable RC truss floor systems.” J. Sound Vib., 361(20), 130–147.
Zhou, X. H., Li, J., and Liu, J. P. (2015). “Vibration of pre-stressed cable RC truss floor system due to human activities.” J. Struct. Eng., 04015170.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jul 1, 2015
Accepted: Nov 5, 2015
Published online: Jan 27, 2016
Discussion open until: Jun 27, 2016
Published in print: Oct 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.