Actual Working Performance Assessment of Super-High Arch Dams
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 2
Abstract
China is addressing the significant challenge posed by the construction of several 300-m-high arch dams for the effective use of hydropower resources. Limited experience has been gained globally in the construction of super-high arch dams. Moreover, the present design codes are based on past experiences with arch dams with significantly lower height. Stress computation consists of many analytical simplifications. In addition, numerous questions may be raised regarding the reliability of this computation for application to super-high arch dams. This study therefore presents an integrated analytical approach to simulate the actual working performance of super-high arch dams. This approach emphasizes the significance of the analytical descriptions on four actual factors: (1) actual material, (2) actual structure, (3) actual load, and (4) actual process. Furthermore, the effectiveness of the actual working performance simulation has been proven by updated engineering practice.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work has been supported by National “973” program research project (2013CB035904, 2013CB036406), National 12th five-year technical support plan (SQ2013BAJY4138B02), Scientific and technological project of IWHR (CJ1361, CJ1353, CQN1305).
References
Azmi, M., and Paultre, P. (2002). “Three-dimensional analysis of concrete dams including contraction joint non-linearity.” Eng. Struct., 24(6), 757–771.
Bureau of Reclamation. (1977). Design of arch dams—Design manual for concrete arch dams, Denver.
Chopra, A. K. (2012). “Earthquake analysis of arch dams: Factors to be considered.” J. Struct. Eng., 205–214.
Jin, F., Chen, Z., Wang, J., and Yang, J. (2010). “Practical procedure for predicting non-uniform temperature on the exposed face of arch dams.” Appl. Therm. Eng., 30(14–15), 2146–2156.
Jin, F., Hu, W., Pan, J., Yang, J., Wang, J., and Zhang, C. (2011). “Comparative study procedure for the safety evaluation of high arch dams.” Comput. Geotech., 38(3), 306–317.
Léger, P., and Leclerc, M. (2007). “Hydrostatic, temperature, time-displacement model for concrete dams.” J. Eng. Mech., 267–277.
Lombardi, G. (1991). “Kolnbrein Dam: An unusual solution for an unusual problem.” Water Power Dam Constr., 43(6), 31–34.
National Energy Administration. (2006). “Design specification for concrete arch dams (English version).”, Beijing.
Ren, Q. W., Xu, L. Y., and Wang, Y. H. (2007). “Research advance in safety analysis methods for high concrete dam.” Sci. China Ser. E: Technol. Sci., 50(1), 62–78.
Santillán, D., Salete, E., Vicente, D., and Toledo, M. (2014). “Treatment of solar radiation by spatial and temporal discretization for modeling the thermal response of arch dams.” J. Eng. Mech., 05014001.
SAPTIS [Computer software]. P.R. China, China Institute of Water Resources and Hydropower Research.
Sevim, B., Altunişik, A. C., and Bayraktar, A. (2012). “Earthquake behavior of Berke arch dam using ambient vibration test results.” J. Perform. Constr. Facil., 780–792.
Sheibany, F., and Ghaemian, M. (2006). “Effects of environmental action on thermal stress analysis of Karaj concrete arch dam.” J. Eng. Mech., 532–544.
Song, Y. P., and Wang, H. L. (2007). “Endochronic damage constitutive model for fully-graded aggregate mass concrete.” Front. Archit. Civ. Eng. China, 1(3), 274–280.
Tan, H., and Chopra, A. K. (1995). “Earthquake analysis of arch dams including dam-water-foundation rock interaction.” Earthquake Eng. Struct. Dyn., 24(11), 1453–1474.
Tarinejada, R., Ahmadib, M. T., and Harichandranc, R. S. (2014). “Full-scale experimental modal analysis of an arch dam: The first experience in Iran.” Soil Dyn. Earthquake Eng., 61–62, 188–196.
Wittke, W. (1990). Rock mechanics—Theory and applications with case histories, Springer, Berlin.
Yang, Q., Liu, Y. R., Chen, Y. R., and Zhou, W. Y. (2008). “Deformation reinforcement theory and its application to high arch dams.” Sci. China Ser. E: Technol. Sci., 51(2), 32–47.
Yu, X., Zhou, Y. F., and Peng, S. Z. (2005). “Stability analyses of dam abutments by 3D elasto-plastic finite-element method: A case study of Houhe gravity-arch dam in China.” Int. J. Rock Mech. Min. Sci., 42(3), 415–430.
Zhang, C. (2004). “Challenge of high dam construction to computational mechanics.” Proc., 6th World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, Z. Yao, M. Yuan, and W. Zhong, eds., Tsinghua University Press, Beijing.
Zhang, G. X., Liu, Y., Zheng, C. Y., and Feng, F. (2011). “Simulation of influence of multi-defects on long-term working performance of high arch dam.” Sci. China Ser. E: Technol. Sci., 54(1), 1–8.
Zhang, G. X., Liu, Y., and Zhou, Q. J. (2008). “Study on real working performance and overload safety factor of high arch-dam.” Sci. China Ser. E: Technol. Sci., 51(2), 48–59.
Zhou, J., Lin, G., Zhu, T., Jefferson, A. D., and Williams, F. W. (2000). “Experimental investigations into seismic failure of high arch dams.” J. Struct. Eng., 926–935.
Zhu, B., Li, Y., Xu, P., and Zhang, G. (2007). “Substitution of the curtain of drainage holes by a seeping layer in the three dimensional finite element analysis of seepage field.” Water Resour. Hydropower Eng., 38(10), 42–82 (in Chinese).
Zhu, B. F., et al. (1992). “Shape optimization of arch dams for static and dynamic loads.” J. Struct. Eng., 2996–3015.
Zhu, B. F. (2013). Thermal stresses and temperature control of mass concrete, Butterworth-Heinemann, London.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jul 22, 2014
Accepted: Dec 26, 2014
Published online: Feb 20, 2015
Discussion open until: Jul 20, 2015
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.