Abstract
This paper investigates the influence of unreinforced masonry panels on the robustness of multistory buildings under sudden column loss scenarios. A recently developed multilevel framework is employed to evaluate the resistance to progressive collapse under such scenarios, which is applied in this paper at story level allowing for the resistance of the floor system and the infill panels. The response of various structural components under pushdown deformation is obtained using high-fidelity finite-element analysis, where an accurate mesoscale description is utilized for the masonry infill, elastoplastic beam-column elements are used for the floor system, and component-based nonlinear mechanical models are employed for the joints. This methodology is applied to a 7-story composite steel-concrete benchmark building, where it is established that the use of masonry infill panels for exterior cladding can considerably increase progressive collapse resistance, even in the case of perforated walls. Furthermore, the results indicate that the maximum dynamic deformations under sudden column loss are relatively small due to the significant resistance of the infill, which is particularly relevant when considering the retrofitting of structures affected by column loss.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers acknowledge the support provided by the Portuguese Foundation for Science and Technology (FCT) through the doctoral grant SFRH/BD/70935/2010, and by the of high performance computing (HPC) services at Imperial College London.
References
Canadian Standards Association (CSA). (1994). “Masonry design and construction for buildings—Limit states design.” CSA S304.1-94, Rexdale, ON, Canada.
Cormie, D., Mays, G., and Smith, P. (2009). Blast effects on buildings, Thomas Telford Publishers, London.
Department of Defense (DoD). (2009). “Unified facilities criteria—Design of buildings to resist progressive collapse.”, Washington, DC.
European Committee for Standardization (CEN). (2006). “Eurocode 1: Actions on structures, part 1—7: General actions—Accidental actions.” EN 1991-1-7, Brussels, Belgium.
Farazman, S., Izzuddin, B. A., and Cormie, D. (2013). “Influence of unreinforced masonry infill panels on the robustness of multi-storey buildings.” J. Perform. Constr. Facil., 673–682.
Gudmundsson, G. V., and Izzuddin, B. A. (2010). “The ‘sudden column loss’ idealization for disproportionate collapse assessment.” Struct. Eng., 88(6), 22–26.
Izzuddin, B. A. (1991). “Nonlinear dynamic analysis of framed structures.” Ph.D. thesis, Dept. of Civil Engineering, Imperial College London, London.
Izzuddin, B. A. (2009). “Recent developments in design-oriented assessment of building robustness.” Trends in civil and structural engineering computing, Saxe-Coburg Publications, Stirlingshire, Scotland, 243–266.
Izzuddin, B. A. (2010). “Robustness by design—Simplified progressive collapse assessment of building structures.” Stahlbau, 79(8), 556–564.
Izzuddin, B. A., and Nethercot, D. A. (2009). “Design-oriented approaches for progressive collapse assessment: Load-factor versus ductility-centered methods.” Don’t mess with structural engineers: Expanding our role, ASCE, Austin, TX.
Izzuddin, B. A., Vlassis, A. G., Elghaz1ouli, A. Y., and Nethercot, D. A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss—Part I: Simplified assessment framework.” Eng. Struct., 30(5), 1308–1318.
Jokhio, G. A. (2012). “Mixed dimensional hierarchic partitioned analysis of nonlinear structural systems.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Imperial College London, London.
Jokhio, G. A., and Izzuddin, B. A. (2013). “Parallelisation of nonlinear structural analysis using dual partition super-elements.” Adv. Eng. Software, 60–61(1), 81–88.
Khandelwal, K., and El-Tawil, S. (2011). “Pushdown resistance as a measure of robustness in progressive collapse analyis.” Eng. Struct., 33(9), 2653–2661.
Macorini, L., and Izzuddin, B. A. (2011). “A non-linear interface element for 3D mesoscale analysis of brick-masonry structures.” Int. J. Numer. Meth. Eng., 85(12), 1584–1608.
Macorini, L., and Izzuddin, B. A. (2013). “Nonlinear analysis of masonry structures using mesoscale partitioned modelling.” Adv. Eng. Software, 60–61(1), 58–69.
Macorini, L., and Izzuddin, B. A. (2014). “Nonlinear analysis of unreinforced masonry walls under blast loading using mesoscale partitioned modeling.” J. Struct. Eng., A4014002.
Mosalam, K. M., and Günay, S. (2014). “Progressive collapse analysis of RC frames with URM infill walls considering in-plane/out-of-plane interaction.” Earthq. Spec., in press.
Smith, P. P., Byfield, M. P., and Goode, D. J. (2010). “Building robustness research during World war II.” J. Perform. Constr. Facil., 529–535.
Tiago, P., and Julio, E. (2010). “Damage of an RC building after a landslide—Inspection, analysis and retrofitting.” Eng. Struct., 32(7), 1814–1820.
Vlassis, A. G. (2007). “Progressive collapse assessment of tall buildings.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Imperial College London, London.
Vlassis, A. G., Izzuddin, B. A., Elghazouli, A. Y., and Nethercot, D. A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss—Part II: Application.” Eng. Struct., 30(5), 1424–1438.
Xavier, F. B., Macorini, L., and Izzuddin, B. A. (2013). “Mesoscale modeling of masonry structures accounting for brick-mortar interaction.” Proc., Int. Conf. on Civil, Structural and Environmental Engineering, Civil-Comp, Stirlingshire, Scotland.
Xu, G., and Ellingwood, B. R. (2011). “An energy-based partial pushdown analysis procedure assessment of disproportionate collapse potential.” J. Constr. Steel Res., 67(3), 547–555.
Zolghadr Jahromi, H., Vlassis, A. G., and Izzuddin, B. A. (2013). “Modelling approaches for robustness assessment of multi-storey steel-composite buildings.” Eng. Struct., 51, 278–294.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 2, 2014
Accepted: Sep 11, 2014
Published online: Oct 6, 2014
Discussion open until: Mar 6, 2015
Published in print: Oct 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.