Numerical Evaluation of Toe-Deck Fatigue in Orthotropic Steel Bridge Deck
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 6
Abstract
Some toe-deck crack cases in China have been reported after about 10 years of service in suspension and beam bridge steel orthotropic decks with trough stiffeners. In this paper, a reference stress method used in design practice and a hot-spot stress method provided by the International Institute of Welding are used to investigate toe-deck fatigue of the newly built Taizhou Yangtze River Bridge. Shell and solid finite element models with different mesh sizes are compared. The hot spot at the weld toe and the point at the trough-deck intersection are discussed. One is a shell-model hot spot with no weld. The other is a solid-model hot spot with the weld. Hot-spot stress calculated with the shell model is larger than that with the solid model. Different extrapolation methods of hot-spot stress are discussed; stress calculated with the linear extrapolation method is almost the same as with the quadratic method. The stress of the joint under a moving unit wheel load is studied. Fatigue strengths against reference and hot-spot stresses are derived. Fatigue damages under the truck load, evaluated based on the reference stress method and the hot-spot stress method, are compared.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported herein has been conducted as part of the research projects granted by the National Natural Science Foundation of China (51108153) and the Postdoctoral Science Foundation of China (2012M511188). The assistance is gratefully acknowledged.
References
AASHTO. (2004). AASHTO LRFD bridge design specifications, 3rd Ed., Washington, DC.
Ansys. (2013a). Advanced analysis techniques guide. Section 9.4: Shell-to-solid submodels, Canonsburg, PA.
Ansys. (2013b). Mechanical user’s guide, Canonsburg, PA.
Aygül, M., and Al-Emrani, M. (2012). “Modelling and fatigue life assessment of orthotropic bridge deck details using FEM.” Int. J. Fatigue, 40, 129–142.
European Committee for Standardization (CEN). (2003). EN 1991-2: Eurocode 1: Actions on structures—Part 2: Traffic loads on bridges, Brussels, Belgium.
European Committee for Standardization (CEN). (2005). EN 1993-1-9: Eurocode 3: Design of steel structures—Part 1-9: Fatigue, Brussels, Belgium.
Hobbacher, A. (2008). “Recommendations for fatigue design of welded joints and components.”, International Institute of Welding, Paris, France.
Ji, B. H., and Chen, D. H. (2012). “Research on stress spectrum of steel decks in suspension bridge considering measured traffic flow.” J. Perform. Constr. Facil., 65–75.
Ji, B. H., and Liu, R. (2013). “Evaluation on root-deck fatigue of orthotropic steel bridge deck.” J. Constr. Steel Res., 90, 174–183.
Kim, M. H., and Kim, S. M. (2009). “A comparative study for the fatigue assessment of a ship structure by use of hot spot stress and structural stress approaches.” Ocean Eng., 36(14), 1067–1072.
Kolstein, M. H. (2007). Fatigue classification of welded joints in orthotropic steel bridge decks, Gildeprint Drukkerijen B.V., The Netherlands.
Maddox, S. J. (1974). “Fatigue of welded joints loaded in bending.”, Transport and Road Research Laboratory, Structures Dept., Bridges Div., Crowthorne, Berkshire, U.K.
Pfeil, M. S., and Battista, R. C. (2005). “Stress concentration in steel bridge orthotropic decks.” J. Constr. Steel Res., 61(8), 1172–1184.
Savaidis, G., and Vormwald, M. (2000). “Hot-spot stress evaluation of fatigue in welded structural connections supported by finite element analysis.” Int. J. Fatigue, 22(2), 85–91.
Sim, H. B., and Uang, C. M. (2012). “Stress analyses and parametric study on full-scale fatigue tests of rib-to-deck welded joints in steel orthotropic decks.” J. Bridge Eng., 765–773.
Tian, Y., Li, Y. S., Zhang, D. Y., and Dai, Y. L. (2011). “Static and fatigue test research on welded rib-deck connections in steel orthotropic bridge deck.” Chin. J. Railway Sci. Eng., 8(2), 34–39.
Xiao, Z. G., and Yamada, K. (2008). “Stress analyses and fatigue evaluation of rib-to-deck joints in steel orthotropic decks.” Int. J. Fatigue, 30(8), 1387–1397.
Xu, W., and Zhang, X. N. (2008). “Analysis of distress characters and design of steel orthotropic bridge decks pavement China.” International Orthotropic Bridge Conf., ASCE, Sacramento, CA.
Ya, S., and Yamada, K. (2010). “Fatigue durability of trough rib to deck plate welded detail of some orthotropic steel decks.” Jpn. J. Struct. Eng., 56A, 77–90.
Ya, S., and Yamada, K. (2011). “Fatigue evaluation of rib-to-deck welded joints of orthotropic steel bridge deck.” Jpn. J. Bridge Eng., 492–499.
Yuan, H. (2011). Optimization of rib-to-deck welds for steel orthotropic bridge decks, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 16, 2013
Accepted: Aug 21, 2014
Published online: Oct 7, 2014
Discussion open until: Mar 7, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.