Progressive Collapse of Steel Moment Frames Subjected to Vehicle Impact
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 6
Abstract
Structures are often subjected to vehicle collision, which can be accidental or intentional as in the case of a terrorist attack. This study investigated the performance of three-story steel moment frames with span length of 5 and 10 m subjected to vehicle collision at a first-story column using finite-element analysis software. The progressive collapse potential of the model structures was evaluated first based on the alternate path approach specified in the published guidelines. The vehicle impact analysis showed that all model structures remained stable when the speed of the vehicle was . However at the speeds of 80 and , progressive collapse occurred at both model structures after collision. The overall damages obtained from collision analysis were significantly larger than those computed based on the sudden column removal approach.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was financially supported by a grant (Code#’ 09 R&D A01) funded by the Ministry of Land and Transport of Korean government and by the Global Ph.D. Fellowship Program (NRF-2013).
References
American Iron and Steel Institute (AISI). (2014). “The online resource for steel.” Washington, DC, 〈http://www.steel.org/〉 (Feb. 12, 2014).
ASCE. (1999). Structural design for physical security: State of the practice, ASCE, New York.
ASCE. (2007). “Seismic rehabilitation of existing buildings.” ASCE/SEI 41-06, ASCE, Reston, VA.
Borovinsek, M., Vesenjak, M., Ulbin, M., and Ren, Z. (2007). “Simulation of crash tests for high containment levels of road safety barriers.” Eng. Fail. Anal., 14(8), 1711–1718.
Cormie, D., Mays, G., and Smith, P. (2009). Vehicle-borne threats and the principles of hostile vehicle mitigation, blast effects on buildings, 2nd Ed., Thomas Telford.
Cowper, G. R., and Symonds, P. S. (1958). “Strain hardening and strain rate effects in the impact loading of cantilever beams.” Applied Mathematics Rep., Div. of Applied Mathematics, Brown Univ., Providence, RI.
European Standard. (1998). “Road restraint systems.” EN 1317, British Standards Institution, London.
Ferrer, B., Ivorra, S., Segovia, E., and Irles, R. (2010). “Tridimensional modelization of the impact of a vehicle against a metallic parking column at a low speed.” Eng. Struct., 32(8), 1986–1992.
Itoh, Y., Liu, C., and Kusama, R. (2007). “Dynamic simulation of collisions of heavy high-speed trucks with concrete barriers.” Chaos, Solitons Fractals, 34(4), 1239–1244.
Kim, J., Lee, S., and Choi, H. (2013). “Progressive collapse resisting capacity of moment frames with viscous dampers.” Struct. Des. Tall Special Build., 22(5), 399–414.
Liu, Y. (2011). “Study of thin-walled box beams crushing behavior using LS-DYNA.” 11th Int. LS-DYNA Users Conf., Dearborn, MI, 13, 31–40.
LS-DYNA 971 [Computer software]. Livermore, CA, Livemore Software Technology.
Marjanishvili, S. M. (2004). “Progressive analysis procedure for progressive collapse.” J. Perform. Constr. Facil., 79–85.
National Crash Analysis Center (NCAC). (2010). “National Crash Analysis Center.” George Washington Univ., Washington, DC, 〈http://hpcl.seas.gwu.edu/impact/labs-centers/14-national-crash-analysis-center-ncac〉 (Feb. 11, 2014).
PERFORM-3D [Computer software]. Berkeley, CA, Computer and Structures.
Sharma, H., Hurlebaus, S., and Gardoni, P. (2012). “Performance-based response evaluation of reinforced concrete columns subject to vehicle impact.” Int. J. Impact Eng., 43(5), 52–62.
Tay, S. K., Lim, B., and Ng, S. H. (2012). “Crash impact modelling of security bollard.” 12th Int. LS-DYNA Users Conf., Detroit, 13, 1–10.
Tsai, M. H., and Lin, B. H. (2008). “Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure.” Eng. Struct., 30(12), 3619–3628.
UFC. (2013). “Unified facilities criteria: Design of buildings to resist progressive collapse.”, Dept. of Defense, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 26, 2014
Accepted: Jul 25, 2014
Published online: Sep 30, 2014
Discussion open until: Feb 28, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.