Partial Collapse of One of the Most Important Historical Buildings in Salerno, Italy
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 6
Abstract
On the night of June 15, 2007, a corner of one of the most important historical buildings in Salerno (the so called Palazzo Edilizia) collapsed, 80 years after its construction. Such a ruinous failure did not cause any casualties only because the collapsed side was that of the living rooms. The aim of the analysis performed by the authors was mainly the search of the causes of such a ruinous collapse. The article not only deals with the description of the methodology adopted for the analysis but also discusses the results in order to trace general criteria that could be useful for the reliability assessment of the existing masonry buildings.
Get full access to this article
View all available purchase options and get full access to this article.
References
Corotis, R. B., and Doshi, V. A. (1977). “Probability models for live load survey result.” J. Struct. Div., 103(ST6), 1257–1274.
De Tommasi, G., Monaco, P., and Vitone, C. (2003). “A first approach to load path method on the masonry structures behavior.” Structural studies, repairs and maintenance of heritage architecture VIII, WIT, Southampton, U.K., 287–296.
Ellingwood, B., Galambos, T. H., Macgregor, J. G., and Cornell, C. A. (1980). “Development of a probability based load criterion for American national standard A58. Building code requirements for minimum design loads in buildings and other structures.”, Washington, DC.
European Committee for Standardization (CEN). (2000). “Methods of test for masonry units—Determination of compressive strength, part 1.” EN 772, Brussels, Belgium.
European Committee for Standardization (CEN). (2004). “Design of concrete structures. General rules and rules for buildings, part. 1.1.” Eurocode 2, Brussels, Belgium.
European Committee for Standardization (CEN). (2005a). “Basis of structural design.” Eurocode, Brussels, Belgium.
European Committee for Standardization (CEN). (2005b). “Design of masonry structures. General rules for reinforced and unreinforced masonry structures, part 1.1.” Eurocode 6, Brussels, Belgium.
European Committee for Standardization (CEN). (2005c). “Specification for masonry units. Natural stone masonry units, part 6.” EN 771, Brussels, Belgium.
Fédération Internationale du Béton (FIB). (2002). Bulletin 17. Management, maintenance and strengthening of concrete structures, Sprint-Digital-Druck, Stuttgart, Germany.
Mezzina, M., Palmisano, F., and Raffaele, D. (2010). “The design of R.C. bridge deck subjected to horizontal actions by strut-and-tie model.” Bridge Maintenance, Safety, Management and Life-Cycle Optimization (Proc. 5th Int. Conf. on Bridge Maintenance, Safety and Management–IABMAS 2010, Philadelphia, Pensylvania, U.S., July 11–15, 2010), Taylor & Francis Group, London, 2390–2397.
Mezzina, M., Palmisano, F., and Raffaele, D. (2012). “Designing simply supported R.C. bridge decks subjected to in-plane actions: Strut-and-tie model approach.” J. Earthquake Eng., 16(4), 496–514.
Palmisano, F. (2005). “Form and structure in the harmonious complexity of the building process: From conceptual design to detailing in some reinforced concrete works.” Struct. Concr., 6(3), 122–130.
Palmisano, F. (2013). “Interpretation of the behaviour of masonry arches and domes by simple models.” Structural studies, repairs and maintenance of heritage architecture XIII (WIT transactions on the built environment 131), WIT, Southampton, U.K., 233–244.
Palmisano, F. (2014). “Assessment of masonry arches and domes by simple models.” Int. J. Struct. Eng., 5(1), 63–75.
Palmisano, F., and Elia, A. (2009). “Masonry buildings subjected to foundation settlements due to landslide: A preliminary study on the interpretation of structural behaviour using load path method.” Structural Studies, Repairs and Maintenance of Heritage Architecture XI (WIT Transactions on the Built Environment 109), WIT, Southampton, U.K., 141–150.
Palmisano, F., and Elia, A. (2013b). “Structural behaviour of masonry buildings subjected to landslide: Load path method approach.” Structures and Architecture: New concepts, applications and challenges (Proc., 2nd Int. Conf. on Structures & Architecture, Guimarães, Portugal, July 24–26, 2013), CRC /Balkema, Leiden, Netherlands, 888–895.
Palmisano, F., and Elia, A. (2013a). “Analysis of the structural behaviour of masonry buildings subjected to landslide by using the load path method.” Int. J. Earth Sci. Eng., 6(1), 39–49.
Palmisano, F., and Elia, A. (2014b). “Assessment of masonry buildings subjected to landslide by using the load path method.” Int. J. Civ. Eng., 12(2), 312–330.
Palmisano, F., and Elia, A. (2014a). “Behaviour of masonry buildings subjected to landslide-induced settlements.” Int. J. Struct. Eng., 5(2), 93–114.
Palmisano, F., and Totaro, A. (2010). “Load path method in the interpretation of dome behavior.” Structures & Architecture (Proc., 1st Int. Conf. on Structures & Architecture, Guimarães, Portugal, July 21–23, 2010), CRC /Balkema, Leiden, Netherlands, 1826–1833.
Palmisano, F., Vitone, A., and Vitone, C. (2005). “Load path method in the interpretation of the masonry vault behavior.” Structural Studies, Repairs and Maintenance of Heritage Architecture IX (Advances in Architecture Series 20), WIT, Southampton, U.K., 155–167.
Palmisano, F., Vitone, A., and Vitone, C. (2008). “A first approach to optimum design of cable supported bridges using load path method.” Struct. Eng. Int., 18(4), 412–420.
Palmisano, F., Vitone, A., Vitone, C., and Vitone, V. (2007). “Collapse of the Giotto Avenue building in Foggia.” Struct. Eng. Int., 17(2), 166–171.
Ratay, R. T., and Peraza, D. B. (2013). “Investigation and analysis of structural collapses.” Encyclopedia of forensic sciences, Vol. 2, 2nd Ed., J. A. Siegel and P. J. Saukko (eds.), Academic Press, Waltham, MA, 461–465.
Roca, P., Viviescas, A., Lobato, M., Díaz, C., and Serra, I. (2011). “Capacity of shear walls by simple equilibrium models.” Int. J. Archit. Heritage, 5(4–5), 412–435.
Schlaich, J., Schafer, K., and Jennewein, M. (1987). “Toward a consistent design of structural concrete.” PCI J., 32(3), 74–150.
Vitone, C. (2001). “Il load path method per il restauro strutturale delle opere murarie.” M.Eng. thesis, Politecnico di Bari, Bari, Italy (in Italian).
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 28, 2014
Accepted: Jul 17, 2014
Published online: Sep 25, 2014
Discussion open until: Feb 25, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.