Stability Analysis and Performance of Soil-Nailing Retaining System of Excavation during Construction Period
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 1
Abstract
In this paper, a system failure probability method, considering principal failure modes of the soil-nailing retaining structure and random factors of the system, is put forward. Taking the excavation of the east public square of the Jinan high-speed railway station as the case, the paper first defines principal failure modes of the soil-nailing system according to its working mechanism and collapsing characters. The failure probability of each mode and then the system failure probability were calculated by considering random factors of the retaining structure. The soil nailing–supported excavation was proved to be stable and some effective construction measures were put forward based on the failure probability result during the construction period. A numerical simulation was carried out to analyze the stability of the excavation during each construction step. By using a strength reduction method, safety factors of the excavation were determined. Displacement and shear stress of the excavation were within allowed limits during every calculation step. At the same time, vertical and horizontal displacement of the top point of excavation, horizontal displacement of different depths, and the force of the soil nails were monitored during the construction period. The monitoring data were reasonable and consistent with the results of theory and numerical calculation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the support of the National Natural Science Foundation of China (Grant No. 41172267), and the Natural Science Foundation of Shandong Province (Grant No. ZR2011EEM004).
References
Chassie, R. G. (1993). “‘Soil nailing overview’ and ‘Soil nail wall facing design and current developments’.” 10th Annual Int. Bridge Conf., Engineering Society of Western Pennsylvania, Pittsburgh, PA.
Cheuk, C. Y., Ng, C. W. W., and Sun, H. W. (2005). “Numerical experiments of soil nails in loose fill slopes subjected to rainfall infiltration effects.” Comput. Geotech., 32(4), 290–303.
Cheung, R. W. M., and Tang, W. H. (2005). “Reliability of deteriorating slopes.” J. Geotech. Geoenviron. Eng., 589–597.
Ditlevsen, O. (1979). “Narrow reliability bounds for structural system.” J. Struct. Mech., 7(4), 453–472.
Dright, S. G., and Duncan, G. M. (1991). “Limit equilibrium stability analyses for reinforced slops.” Transportation Research Record 1330, Transportation Research Board, Washington, DC.
Fan, C. C., and Luo, J. H. (2008). “Numerical study on the optimum layout of soil-nailed slopes.” Comput. Geotech., 35(4), 585–599.
Griffiths, D. V., and Fenton, G. A. (2004). “Probabilistic slope stability analysis by finite elements.” J. Geotech. Geoenviron. Eng., 507–518.
Hang, L., Wei, X., and Ping, C. (2013). “Stability of soil nailed slope using strength reduction method.” Eur. J. Environ. Civ. Eng., 17(9), 872–885.
John, P. T. (2005). “Landslide stabilization using soil nail and mechanically stabilized earth walls: Case study.” J. Geotech. Geoenviron. Eng., 141–150.
Lazarte, C. A., Baecher, G. B., and Withiam, J. L. (2003). “New directions in LRFD for soil nailing design and specifications.” Int. Workshop on Limit State Design in Geotechnical Engineering Practice, World Scientific Publishing, Singapore.
Liu, J., Song, J., and Zhang, F. W. (2012). “Safety analysis for casing of gas storage influenced by stochastic factors during operation period.” Rock Soil Mech., 33(12), 3721–3728 (in Chinese).
Lumb, P. (1970). “Safety factors and the probability distribution of soil strength.” Can. Geotech. J., 7(3), 225–242.
Luo, S., Tan, S., and Yong, K. (2000). “Pull-out resistance mechanism of a soil nail reinforcement in dilative soils.” Soils Found., 40(1), 47–56.
Luo, X. H., Li, Z. G., and He, L. H. (2006). “The pit soil nails’ stability based on reliability analysis.” J. Geotech. Eng., 28(4), 480–484 (in Chinese).
MATLAB [Computer software]. MathWorks, Natick, MA.
MOHURD. (2012). “Technical specification for retaining and protection of building foundation excavations.”, China Architecture and Building Press.
Ross, J., and Marshak, A. (1991). Monte-Carlo method, Springer, New York, 441–467.
Sivakumar, B. G. L., and Vikas, P. S. (2009). “Reliability analysis of soil nail walls.” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 3(1), 44–54.
Thomas, J. T. (1997). “Stabilizing the stacks—A hybrid soil nailing system provides permanent underpinning for a historic college library.” Civ. Eng., 67(12), 44–46.
Thomas, J. T. (2003). “Soil nailing: Where, when and why—A practical guide.” 20th Central Pennsylvania Geotechnical Conf., Central PA Section of ASCE, Camp Hill, PA.
Thorton, S. I. (1995). Slope reliability, Univ. of Arkansas, Fayetteville.
Ugai, K., and Leshchinsky, D. (1995). “Three-dimensional limit equilibrium and finite element analyses: A comparison of results.” Soils Found., 35(4), 1–7.
Wei, W. B., and Cheng, Y. M. (2010). “Soil nailed slope by strength reduction and limit equilibrium methods.” Comput. Geotech., 37(5), 602–618.
Wu, Z. Y., Chen, J. K., and Xu, W. L. (2008). “Systematic reliability analysis of rock slope stability and its engineering application.” J. Sichuan Univ., 40(3), 32–37 (in Chinese).
Yuan, J., Yang, Y., Tham, L., Lee, P., and Tsui, Y. (2003). “New approach to limit equilibrium and reliability analysis of soil nailed walls.” Int. J. Geomech., 145–151.
Zhu, F. C., and Yan, Y. (2003). “The stability and reliability analysis of soil nails for considering soil properties.” Geol. Prospect., 39(4), 78–80 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 24, 2014
Accepted: Jun 10, 2014
Published online: Jul 22, 2014
Discussion open until: Dec 22, 2014
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.