Defects and Their Influencing Factors of Posthandover New-Build Homes
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 4
Abstract
Building defects are an important aspect to address to enhance the quality of homes. However, there is limited knowledge of defects of posthandover new-build homes. This paper aims to examine the profile of building defects in number, type, location, and severity and investigate their influencing factors, including building type, floor area, number of bedrooms, build method, and performance standard. Data were collected using defect records for 327 homes in the United Kingdom (U.K.) during the defects liability period of 12 months posthandover. In total, 3,209 defects were identified and examined. The results indicate that the defect profile of UK post-2006 new-build homes has improved in the number, diversity, and severity of defects. Kitchens and bathrooms remained the two most defective areas. Larger houses were found to be significantly more defective than smaller flats. However, no clear relationship was observed between the defect profile of the dwellings and their build method or performance standard adopted. The findings shed light on the understanding of the profile of building defects and should support their better predictability and control in future practices.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahzahar, N., Karim, N. A., Hassan, S. H., and Eman, J. (2011). “A study of contribution factors to building failures and defects in construction industry.” Procedia Eng., 20, 249–255.
Assaf, S., Al-Hammand, A., and Al-Shihah, M. (1996). “Effects of faulty design and construction on building maintenance.” J. Perform. Constr. Facil., 171–174.
Atkinson, A. R. (2002). “The pathology of building defects: A human error approach.” Eng. Constr., Archit. Manage., 9(1), 53–61.
Auchterlounie, T. (2009). “Recurring quality issues in the UK private house building industry.” Struct. Surv., 27(3), 241–251.
Ball, P. L. (1987). “The economics and assurance of quality in construction.” Conf. Proc., ‘Quality: A Shared Commitment’, European Organization for Quality Control’s Seminar on Construction Quality Management, Institute of Quality Assurance, London.
Bonshor, R. B., and Harrison, H. W. (1982). Traditional housing: A BRE study of quality, Building Research Establishment, Watford, U.K.
British Standards Institution (BSI). (2006). “Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA).” BS EN 60812:2006, London.
Bryman, A., and Cramer, D. (2011). Quantitative data analysis with IBM SPSS 17, 18 & 19: A guide for social scientists, Routledge, London.
Callcutt, J. (2007). The callcutt review of housebuilding delivery, Dept. of Communities and Local Government (CLG), London.
Chartered Institution of Building Services Engineers (CIBSE). (2007). Guide to ownership, operation and maintenance of building services, London.
Chew, M. Y. L. (2005). “Defect analysis in wet areas of buildings.” Constr. Build. Mater., 19(3), 165–173.
Chong, W. K., and Low, S. P. (2006). “Latent building defects: Causes and design strategies to prevent them.” J. Perform. Constr. Facil., 213–221.
Das, S., and Chew, M. Y. L. (2011). “Generic method of grading building defects using FMECA to improve maintainability decisions.” J. Perform. Constr. Facil., 522–533.
Dept. of Communities and Local Government (DCLG). (2006). Code for sustainable homes: A step-change in sustainable home building practice, DCLG, London.
Forcada, N., Macarulla, M., Fuertes, A., Casals, M., Gangolells, M., and Roca, X. (2012). “Influence of building type on post-handover defects in housing.” J. Perform. Constr. Facil., 433–440.
Goodier, C., and Pan, W. (2010). The future of UK housebuilding, RICS, London.
gov.uk. (2013). Policy: Code for sustainable homes, 〈https://www.gov.uk/government/policies/improving-the-energy-efficiency-of-buildings-and-using-planning-to-protect-the-environment/supporting-pages/code-for-sustainable-homes〉 (Nov. 22, 2013).
Hammarlund, Y., Jacobsson, S., and Josephson, P.-E. (1990). “Quality failure costs in building construction.” CIB Int. Symp. at the Univ. of Technology, Sydney, 14–21 March 1990, Sydney, Australia.
Harrison, H. W. (1993). Quality in new-build housing, Building Research Establishment, Watford, U.K.
Ilozor, B. D., Okoroh, M. I., Egbu, C. E., and Archicentre (2004). “Understanding residential house defects in Australia from the state of Victoria.” Build. Environ., 39(3), 327–337.
Johnsson, H., and Meiling, J. H. (2009). “Defects in offsite construction: Timber module prefabrication.” Constr. Manage. Econ., 27(7), 667–681.
Josephson, P. E., and Hammarlund, Y. (1999). “The causes and costs of defects in construction: A study of seven building projects.” Autom. Constr., 8(6), 681–687.
Kirkpatrick, L. A., and Feeney, B. C. (2012). A simple guide to IBM SPSS statistics for versions 18.0 & 19.0, Wadsworth, Belmont, CA.
Lourenco, P. B., Luso, E., and Almeida, M. G. (2006). “Defects and moisture problems in buildings from historical city centres: A case study in Portugal.” Build. Environ., 41(2), 223–234.
Love, P. E. D. (2002). “Influence of project type and procurement method on rework costs in building construction projects.” J. Constr. Eng. Manage., 18–29.
Marshall, D., Worthing, D., and Heath, R. (2009). Understanding housing defects, 3rd Ed., EG Books, London.
Met Office. (2011). Wales: Climate, 〈http://www.metoffice.gov.uk/climate/uk/wl/print.html〉 (Apr. 20, 2012).
Office for National Statistics (ONS). (2009). UK worth £7.0 trillion: Decrease of £177bn on previous year, 〈http://webarchive.nationalarchives.gov.uk/20090805161024/http://statistics.gov.uk/cci/nugget.asp?id=479〉 (June 19, 2013).
Pan, W. (2010). “Relationships between air-tightness and its influencing factors of UK post-2006 new-build dwellings.” Build. Environ., 45(11), 2387–2399.
Pan, W., and Garmston, H. (2012). “Building regulations in energy efficiency: Compliance in England and Wales.” Energy Policy, 45(6), 594–605.
Sommerville, J., Craig, N., and Bowden, S. (2004). “The standardisation of construction snagging.” Struct. Surv., 22(5), 251–258.
Sommerville, J., and McCosh, J. (2006). “Defects in new homes: An analysis of data on 1,696 new UK houses.” Struct. Surv., 24(1), 6–21.
van den Beukel, A. (1989). Quality cost, committee on housing, building and planning, Economic Commission for Europe, Economic and Social Council, Geneva, Switzerland.
Wahab, S. N. A., and Hamid, M. Y. (2011). “A review factors affecting building defects of structural steel construction. Case study: Student accommodation in UiTM Perak.” Procedia Eng., 20, 174–179.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 2, 2013
Accepted: Apr 16, 2014
Published online: Sep 4, 2014
Discussion open until: Feb 4, 2015
Published in print: Aug 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.