CLT–Steel Hybrid System: Ductility and Overstrength Values Based on Static Pushover Analysis
Publication: Journal of Performance of Constructed Facilities
Volume 28, Issue 6
Abstract
A timber-steel hybrid system, where cross-laminated timber (CLT) shear panels are used as infill in steel moment resisting frames, is analytically investigated. The proposed hybrid system combines ductile behavior of steel moment frame with lighter and stiffer CLT panels. Initial parametric study is carried out with a single-bay-single-story model using pushover analysis to investigate effect of CLT panel thickness, crushing strength, and confinement gap. Results showed that the parameters studied have a significant influence on system’s ultimate strength, ultimate drift capacity, and post-peak behavior. Subsequently, parametric studies are carried out for three-bay hybrid buildings with three-, six-, and nine-story hybrid buildings for varying panel configuration (a given gap, panel thickness, and crushing strength) values. The parameters varied and are design ductility level (limited ductility and ductile) and infill pattern. A monotonic pushover analysis was performed to develop a preliminary ductility and overstrength values based on both steel yield of frame and panel crushing force in the links. Overall, the results suggest that addition of infill bays is less beneficial in ductile moment frames; CLT infill panels are better suited to lower ductility systems. Ultimately, a ductility factor of 2.5 is recommended for the infilled frame system, and an overstrength factor of 1.25 appears to be warranted.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported through funding to the NSERC Strategic Network on Innovative Wood Products and Building Systems (NEWBuildS).
References
Applied Technology Council (ATC). (2009). “Quantification of building seismic performance factors.”, Redwood City, CA.
ASCE. (2006). “Seismic rehabilitation of existing buildings.”, Reston, VA.
Asiz, A., and Smith, I. (2011). “Connection system of massive timber elements used in horizontal slabs of hybrid tall buildings.” J. Struct. Eng., 137(11), 1390–1393.
Baba, N., and Nishimura, Y. (2000). “Seismic behavior of RC column-s beammoment frames.” Proc., 12th World Conf. of Earthquake Engineering (WCEE), Technical Programme and Handbook, BC, Canada.
Baba, N., and Nishimura, Y. (2004). “Elastic -plastic behavior of reinforced concrete column-steel beam joints under bi-directional loading.” 13th World Conf. on Earthquake Engineering (WCEE), Technical Programme and Handbook, BC, Canada.
Canadian Institute of Steel Construction (CISC). (2010). Handbook of steel construction, CSA S16-09, 10th Ed., Quadratone Graphics, Toronto, Canada.
Chopra, A. K. (2011). Dynamics of structures, Prentice Hall, Univ. of California, Berkeley, CA.
Erdle, A., Smith, I., Weckendorf, J., and Asiz, A. (2012). “Control of the dynamic performance of hybrid steel frame and cross laminated timber slab buildings.” Proc., 12th World Conf. on Timber Engineering (WTCE), P. Quenneville, ed., Curran Associates, Auckland, New Zealand.
Esmaeili, H., Kheyroddin, A., Kafi, M. A., and Nikbakht, H. (2013). “Comparison of nonlinear behavior of steel moment frames accompanied with RC shear walls or steel bracings.” Struct. Des. Tall Special Building., 22(14), 1062–1074.
Garcia, R., Sullivan, T. J., and Corte, G. D. (2010). “Development of a displacement-based design method for steel frame-RC wall buildings.” J. Earthquake Eng., 14(2), 252–277.
Krisciunas, R. (1996). “Ontario’s experience with composite wood/steel bridges.” Proc., National Conf. on Wood Transportation Structures, U.S. Dept. of Agriculture, Forest Sevice, Forest, Products Lab, Madison, WI.
Lignos, D., and Krawinkler, H. (2011). “Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading.” J. Struct. Eng., 137(11), 1291–1302.
Mitchell, D., Tremblay, R., Karacabeyli, E., Paultre, P., Saatcioglu, M., and Anderson, D. L. (2003). “Seismic force modification factors for the proposed 2005 edition of the National Building Code of Canada 1.” Can. J. Civ. Eng., 30(2003), 308–327.
National Research Council (NRC). (2010). National building code of Canada 2010, National Research Council of Canada, Ottawa.
Newmark, N. M., and Hall, W. J. (1982). Earthquake spectra and design, Earthquake Engineering Research Institute, Berkeley, CA.
Nishiyama, I., Kuramoto, H., and Noguchi, H. (2004). “Guidelines: Seismic design of composite reinforced concrete and steel buildings.” J. Struct. Eng., 130, 336–342.
Opensees. (2010). “Open system for earthquake engineering simulation (Opensees) framework—Version 2.5.” Pacific Earthquake Engineering Research Center, Univ. of California, Berkley, CA 〈http://opensees.berkeley.edu/〉.
Reid, S., and Peng, C. (1997). “Dynamic uniaxial crushing of wood.” Int. J. Impact Eng., 19(97), 531–570.
Rinaldin, G., Amadio, C., and Fragiacomo, M. (2013). “A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures.” Earthquake Eng. Struct. Dyn., 42(13), 2023–2042.
Schneider, J. (2009). “Connections in cross-laminated-timber shear walls considering the behaviour under monotonic and cyclic lateral loading.” M.A.Sc. thesis, Univ. of Stutgart, Stutgart, Germany.
Schneider, J., Karacabeyli, E., Popovski, M., Stiemer, S., and Tesfamariam, S. (2013). “Damage assessment of connections used in cross laminated timber subject to cyclic loads.” J. Perform. Constr. Facil., A4014008.
Schneider, J., Stiemer, S. F., Tesfamariam, S., Karacabeyli, E., and Popovski, M. (2012). “Damage assessment of cross laminated timber connections subjected to simulated earthquake loads.” Proc., 12th World Conf. on Timber Engineering, P. Quenneville, ed., Curran Associates, Auckland, New Zealand, 16–19.
Shen, Y., Schneider, J., Tesfamariam, S., Stiemer, S. F., and Mu, Z. (2013). “Hysteresis behavior of bracket connection in cross-laminated-timber shear walls.” Constr. Build. Mater., 48, 980–991.
Stiemer, F., Dickof, C., and Tesfamariam, S. (2012). “Timber-steel hybrid systems: Seismic overstrength and ductility factors.” Proc., of 10th Int. Conf. on Advances in Steel Concrete Composite and Hybrid Structures, National University of Singapore, Singapore, 2–4.
Structurlam. “Cross laminated timber design guide.” Structurlam cross laminated timber. 〈http://www.structurlam.com/product/images/CLT_Design_Guide_Ver6.pdf〉 (Jul. 12, 2012).
Weckendorf, J., and Smith, I. (2012). “Multi-functional interface concept for high-rise hybrid building systems with structural timber.” Proc., 12th World Conf. on Timber Engineering, 16–19.
Winter, W., Tavoussi, K., Pixner, T., and Parada, F. R. (2010). “Timber-steel-hybrid beams for multi-storey buildings.” Proc., 12th World Conf. on Timber Engineering, Auckland, New Zealand, 16–19.
Yousuf, M., and Bagchi, A. (2009). “Seismic design and performance evaluation of steel-frame buildings designed using the 2005 National building code of Canada.” Can. J. Civ. Eng., 36(2), 280–294.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Aug 6, 2013
Accepted: Apr 1, 2014
Published online: Apr 3, 2014
Published in print: Dec 1, 2014
Discussion open until: Dec 22, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.