Crack Assessment of the New Galata Bascule-Type Steel Bridge
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 3
Abstract
The New Galata Bridge connects the two sides of the entrance of the Golden Horn in Istanbul city of Turkey and as a bascule-type bridge, has four flaps, each having a span of 42 m. The bridge has replaced the original Galata Bridge, which gave service from 1912 to 1985. After the new bridge was constructed, serious cracks in steel stringers and near the counterweight blocks were observed during maintenance. As a result, modifications around these areas were made. In this study, fracture and fatigue analyses for cracks occurred in the original structural system were performed. For this purpose, a three-dimensional (3D) finite-element model of the third flap was prepared. Detailed computer analyses were carried out based on original drawings. The stress intensity factor values for cracks were evaluated by using 3D finite-element models and submodels of the bridge. To describe the notch toughness of the material in the vicinity of the cracks, a series of Charpy V-notch (CVN) tests were conducted. The results of the finite-element analyses were compared with the experimental evaluation results. The cracked locations of the bridge were clearly observed in computer model results. Based on these results, recommendations were provided.
Get full access to this article
View all available purchase options and get full access to this article.
References
Albrecht, P., Lenwari, A., and Feng, D. (2008). “Stress intensity factors for structural steel I-beams.” J. Struct. Eng., 421–429.
American Association of State Highway, and Transportation Officials (AASHTO). (1996). “Standard specifications for highway bridges.” Washington, DC.
Barsom, J. M., and Rolfe, S. T. (1999). Fracture and fatigue control in structures: Applications of fracture mechanics, ASTM, Philadelphia.
Bozdag, E., Sunbuloglu, E., and Ersoy, H. (2006). “Vibration analysis of new Galata Bridge-experimental and numerical results.” Comput. Struct., 84(5–6), 283–292.
Chen, H., Grondin, G. Y., and Driver, R. G. (2005). “Fatigue resistance of high performance steel.”, Edmonton, AB.
Clubley, S. K., and Winter, S. N. (2003). “On the fatigue and fracture of site splice welds at the River Mardle Viaduct.” Eng. Fail. Anal., 10(5), 593–604.
Connor, R. J., Kaufmann, E. J., Fisher, J. W., and Wright, W. J. (2007). “Prevention and mitigation strategies to address recent brittle fractures in steel bridges.” J. Bridge Eng., 164–173.
COSMOS/M. (2008). User’s manual, Dassault Systèmes SolidWorks, Waltham, MA.
Crupi, G., Crupi, V., Guglielmino, E., and Taylor, D. (2005). “Fatigue assessment of welded joints using critical distance and other methods.” Eng. Fail. Anal., 12(1), 129–142.
De Jesus, A. M. P., Da Silva, A. L. L., Figueiredo, M. V., Correia, J. A. F. O., Ribeiro, A. S., and Fernandes, A. A. (2011). “Strain-life and crack propagation fatigue data from several Portuguese old metallic riveted bridges.” Eng. Fail. Anal., 18(1), 148–163.
Dexter, R. J., and Pilarski, P. J. (2002). “Crack propagation in welded stiffened panels.” J. Constr. Steel Res., 58(5-8), 1081–1102.
Dexter, R. J., Wright, W. J., and Fisher, J. W. (2004). “Fatigue and fracture of steel girders.” J. Bridge Eng., 278–286.
DIN EN 10025. (2005). “The EN standards for hot rolled products of structural steel.” DIN German Institute for Standardization, Berlin.
Domazet, Z., Krstulovic-Opara, L., and Stupalo, M. (2005). “Fatigue cracks and failures in cement industry, shipbuilding and power plant facilities.” Eng. Fail. Anal., 12(5), 819–833.
EN 10045. (1990). “Metallic materials-Charpy impact test-Part 1: Test method.” European Committee for Standardization, Brussels.
Fisher, J. W. (1984). Fatigue and fracture in steel bridges-case studies, Wiley, New York.
MacDougall, C., Green, M. F., and Shillinglaw, S. (2006). “Fatigue damage of steel bridges due to dynamic vehicle loads.” J. Bridge Eng., 320–328.
Molent, L., Singh, R., and Woolsey, J. (2005). “A method for evaluation of in-service fatigue cracks.” Eng. Fail. Anal., 12(1), 13–24.
Moreno, J., and Valiente, A. (2004). “Stress intensity factors in riveted steel beams.” Eng. Fail. Anal., 11(5), 777–787.
Moreno, J., and Valiente, A. (2006). “Cracking induced failure of old riveted steel beams.” Eng. Fail. Anal., 13(2), 247–259.
NISA-ENDURE. (1993). User’s manual for fatigue and fracture analysis, Engineering Mechanics Research, Troy, MI.
Ozakgul, K., Caglayan, B. O., Tezer, O., and Uzgider, E. (2010). “Crack propagation analysis of New Galata Bridge.” Society for Experimental Mechanics (SEM) Annual Conf., Springer, Indianapolis.
Pavlou, D. G., Labeas, G. N., Vlachakis, N. V., and Pavlou, F. G. (2003). “Fatigue crack propagation trajectories under mixed-mode cyclic loading.” Eng. Struct., 25(7), 869–875.
Peeker, E., and Niemi, E. (1999). “Fatigue crack propagation model based on a local strain approach.” J. Constr. Steel Res., 49(2), 139–155.
Rigby, R., and Aliabadi, M. H. (1997). “Stress intensity factors for cracks at attachment lugs.” Eng. Fail. Anal., 4(2), 133–146.
Righiniotis, T. D., Omer, E., and Elghazouli, A. Y. (2002). “A simplified crack model for weld fracture in steel moment connections.” Eng. Struct., 24(9), 1133–1140.
Rolfe, S. T. (1977). “Fracture and fatigue control in steel structures.” AISC Eng. J., 2–15.
Saul, R. (1996). “The new Galata bridge at Istanbul.” Proc., Engineering Foundation Conf., Part of Composite Construction in Steel and Concrete III, ASCE, New York.
Seifi, R., and Bahrami, R. (2010). “Numerical modeling the effects of overloading and underloading in fatigue crack growth.” Eng. Fail. Anal., 17(6), 1475–1482.
Tide, R. H. R. (2000). “Evaluation of steel properties and cracking in k-area of W shapes.” Eng. Struct., 22(2), 128–134.
Wright, W. J. (2002). “Fracture toughness requirements for highway bridges: past and future trends.” Prog. Struct. Eng. Mater., 4(1), 96–104.
Xie, Y. J., and Wang, X. H. (2004). “Application of G-integral on cracked structural beams.” J. Constr. Steel Res., 60(9), 1271–1290.
Yan, X. (2006). “A numerical analysis of stress intensity factors at bifurcated cracks.” Eng. Fail. Anal., 13(4), 629–637.
Yongshou, L., Xindang, H., Xiaojun, S., Jun, L., and Zhufeng, Y. (2010). “Analytical and experimental investigation of fatigue and fracture behaviors for anti-double dog-bone riveted joints.” Eng. Fail. Anal., 17(6), 1447–1456.
Zhao, Y., and Roddis, W. M. K. (2000). “Fatigue crack investigation for the Arkansas River Bridge in Hutchinson, Kansas.” Constr. Build. Mater., 14(5), 287–295.
Zhao, Y., and Roddis, W. M. K. (2007). “Fatigue behavior and retrofit investigation of distortion-induced web gap cracking.” J. Bridge Eng., 737–745.
Zhou, Y. E., and Biegalski, A. E. (2010). “Investigation of large web fractures of welded steel plate girder bridge.” J. Bridge Eng., 373–383.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 20, 2013
Accepted: Mar 4, 2014
Published online: Mar 6, 2014
Discussion open until: Jan 6, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.