Compressive Strength of Concrete Cores under High Strain Rates
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 1
Abstract
A pulse-shaped split Hopkinson pressure (SHPB) was employed to determine the dynamic compressive mechanical responses of concrete cores. The loading pulses in SHPB experiments were precisely controlled to ensure that the core specimen deforms at a nearly constant strain rate under dynamically equilibrated stress during compression. A modified two-parameter Weibull distribution was used to analyze the test data. The Kolmogorov-Smirnov goodness-of-fit test was used to decide whether test data come from a population with this distribution. On the basis of the test data, Kolmogorov-Smirnov goodness-of-fit test, and probability plot, it is found that the modified Weibull model can be applied to compressive strength for concrete cores. In addition, the strain rate effect on the compressive strength of cores can be accurately predicted from the modified Weibull model.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support for this research was provided by the National Natural Science Foundation of China (Grant No. 51178162) and the Fundamental Research Funds for the Central Universities (Grant No. 2013B05514). The writers would like to express their gratitude to the reviewers for their helpful comments.
References
ASTM. (1990). “Standard specification for obtaining and testing drilled cores and sawed beams of concrete.” C42-90, West Conshohocken, PA.
Asprone, D., Jalayer, F., Prota, A., and Manfredi, G. (2010). “Proposal of a probabilistic model for multi-hazard risk assessment of structures in seismic zones subjected to blast for the limit state of collapse.” Struct. Saf., 32(1), 25–34.
Banthia, N., Mindess, S., Bentur, A., and Pigeon, M. (1989). “Impact testing of concrete using a drop-weight impact machine.” Exp. Mech., 29(1), 63–69.
Bao, X., and Li, B. (2010). “Residual strength of blast damaged reinforced concrete columns.” Int. J. Impact Eng., 37(3), 295–308.
Bartlett, F. M., and MacGregor, J. G. (1994a). “Effect of core diameter on concrete core strengths.” ACI Mater. J., 91(5), 460–470.
Bartlett, F. M., and MacGregor, J. G. (1994b). “Effect of core length-to-diameter ratio on concrete core strengths.” ACI Mater. J., 91(4), 339–348.
Bartlett, F. M., and MacGregor, J. G. (1994c). “Effect of moisture condition on concrete core strengths.” ACI Mater. J., 91(3), 227–236.
Bartlett, F. M., and MacGregor, J. G. (1995). “Cores from high-performance concrete beams.” ACI Mater. J., 91(6), 567–576.
Basu, B., Tiwari, D., Kundu, D., and Prasad, R. (2009). “Is Weibull distribution the most appropriate statistical strength distribution for brittle materials?” Ceram. Int., 35(1), 237–246.
Bischoff, P. H., and Perry, S. H. (1991). “Compressive behaviour of concrete at high strain rates.” Mater. Struct., 24(6), 425–450.
British Standards Institution. (2009). “Testing concrete in structures. Cored specimens. Taking, examining and testing in compression.”, London.
Cho, S. H., Ogata, Y., and Kaneko, K. (2003). “Strain-rate dependency of the dynamic tensile strength of rock.” Int. J. Rock Mech. Min. Sci., 40(5), 763–777.
Frew, D. J., Forrestal, M. J., and Chen, W. (2002). “Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar.” Exp. Mech., 42(1), 93–106.
Georgin, J. F., and Reynouard, J. M. (2003). “Modeling of structures subjected to impact: Concrete behaviour under high strain rate.” Cem. Concr. Compos., 25(1), 131–143.
Gurvich, M. R., Dibenedetto, A. T., and Pegoretti, A. (1997). “Evaluation of the statistical parameters of a Weibull distribution.” J. Mater. Sci., 32(14), 3711–3716.
Loidl, D., Paris, O., Rennhofer, H., Muller, M., and Peterlik, H. (2007). “Skin-core structure and bimodal Weibull distribution of the strength of carbon fibers.” Carbon, 45(14), 2801–2805.
Lu, C., Danzer, R., and Fischer, F. D. (2002). “Fracture statistics of brittle materials: Weibull or normal distribution.” Phys. Rev., 65(6), 67102–67105.
Malvar, L. J., and Ross, C. A. (1998). “Review of strain rate effects for concrete in tension.” ACI Mater. J., 95(6), 735–739.
Nayal, R., and Rasheed, H. A. (2006). “Tension stiffening model for concrete beams reinforced with steel and FRP bars.” J. Mater. Civ. Eng., 831–841.
Singh, S. P., and Kaushik, S. K. (2009). “Flexural fatigue life distributions and failure probability of steel fibrous concrete.” ACI Mater. J., 97(6), 658–667.
Sutcu, M. (1989). “Weibull statistics applied to fiber failure in ceramic composites and work of fracture.” Acta Metall., 37(2), 651–661.
Tuncan, M., Arioz, O., Ramyar, K., and Karasu, B. (2008). “Assessing concrete strength by means of small diameter cores.” Constr. Build. Mater., 22(5), 981–988.
Uysal, M., and Tanylidizi, H. (2011). “Predicting the core compressive strength of self-compacting concrete (SCC) mixtures with mineral additives using artificial neural network.” Constr. Build. Mater., 25(11), 4105–4111.
Wong, T.-F., Wong, R. H. C., Chau, K. T., and Tang, C. A. (2006). “Microcrack statistics, Weibull distribution and micromechanical modeling of compressive failure in rock.” Mech. Mater., 38(7), 664–681.
Wu, S., Chen, X., and Zhou, J. (2012). “Influence of strain rate and water content on mechanical behavior of dam concrete.” Constr. Build. Mater., 36, 448–457.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 24, 2013
Accepted: Jan 27, 2014
Published online: Jan 29, 2014
Discussion open until: Nov 17, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.