Destructive Analysis-Based Testing for Cured-in-Place Pipe
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 4
Abstract
Trenchless rehabilitation techniques such as cured-in-place pipe (CIPP) had been adopted by many municipalities in the province of Quebec to renew their aging sewer systems. Currently CIPP represents the largest market share of the utilized trenchless rehabilitation techniques in the province of Quebec. Considerable funding is being directed towards sewer systems rehabilitation projects. However, there have been little studies on the performance of the rehabilitated sewers, expected life of the liner, and its structural properties. Therefore, in an effort to address this shortcoming, this paper presents the outcome of a destructive testing protocol conducted on liners samples extracted from sewers rehabilitated using CIPP. Samples used in the testing process were collected from two locations in the sewer network that were rehabilitated over 1 decade ago. Testing the liner included examining the physical properties (e.g., thickness, annular gap, and so on), flexural properties, and tensile properties. The results demonstrate excellent current structural properties and strongly indicate that the liner will meet the anticipated lifetime. Deterioration of liner is expected to take place at a low rate. This conclusion remains valid as long as the current factors influencing structural properties do not change drastically over time.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allouche, E., et al. (2014). “A pilot study for retrospective evaluation of cured-in-place pipe (CIPP) rehabilitation of municipal gravity sewers.” Tunn. Undergr. Sp. Technol., 39, 82–93.
Allouche, N., and Wong, L. (2003). “Interactive simulation-based educational software for management of municipal sewer network.” Proc., Int. Pipeline Conf., ASCE, Reston, VA.
Araujo, T., Sabeshan, S., and Yao, B. (2009). “Factors affecting the quality of flexural properties from CIPP field samples.” Proc., Int. No-Dig Conf., North American Society for Trenchless Technology, Liverpool, NY.
ASTM. (1997). “Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulation materials.” ASTM D790-07, West Conshohocken, PA.
ASTM. (1999). “Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials.” ASTM D790, West Conshohocken, PA.
ASTM. (2003). “Standard test method for tensile properties of plastics.” ASTM D638, West Conshohocken, PA.
ASTM. (2007). “Standard practice for rehabilitation of existing pipelines and conduits by the inversion and curing of a resin-impregnated tube.” ASTM F1216-07b, West Conshohocken, PA.
ASTM. (2010). “Standard test method for tensile properties of plastics.” ASTM D638-10, West Conshohocken, PA.
British Standards. (1995). “Fiber-reinforced plastic composites—Determination of flexural properties.” EN ISO 178.
Chughtai, F., and Zayed, T. (2007a). “Sewer pipeline operational condition prediction using multiple regression.” Proc., Int. Pipeline Conf., ASCE, Reston, VA, 1–11.
Chughtai, F., and Zayed, T. (2007b). “Structural condition models for sewer pipeline.” Proc., Int. Conf. on Pipeline Engineering and Construction, ASCE, Reston, VA, 25–33.
Fenner, R. (2000). “Approaches to sewer maintenance: A review.” Urban Water, 2, 343–356.
Grigg, N. (1994). “Maintenance management systems for urban drainage.” Proc., Urban Rehabilitation and Program Techniques, ASCE, Reston, VA, 2–10.
Hasegawa, K., Wada, Y., and Miura, H. (1999). “New assessment system for premeditated management and maintenance of sewer pipe networks.” Proc., Int. Conf. on Urban Storm Drainage, Institution of Engineers, Australia, 586–593.
Najafi, M., and Kulandaivel, G. (2005). “Pipeline condition prediction using neural network models.” Proc., Int. Pipeline Conf., ASCE, Reston, VA, 761–781.
Ruwanpura, J., Ariaratnam, S., and El-Assaly, A. (2004). “Prediction models for sewer infrastructure utilizing rule-based simulation.” Civ. Eng. Environ. Syst., 21(3), 169–185.
Water Industry Specifications (WIS). (1995). “Specification for renovation of gravity sewers by lining with cured-in-place pipes.” WRc Engineering, WIS 4-34-04, Marlow, Bucks.
Yan, J., and Vairavamoorthy, K. (2003a). “Fuzzy approach for pipe condition assessment.” New pipeline technologies, security, and safety, ASCE, Reston, VA, 466–476.
Yan, J., and Vairavamoorthy, K. (2003b). “Fuzzy approach for pipe condition assessment.” Proc., Int. Pipeline Conf., ASCE, Reston, VA.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 14, 2013
Accepted: Dec 26, 2013
Published online: Aug 25, 2014
Discussion open until: Jan 25, 2015
Published in print: Aug 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.