Critical Factors for Structural Safety in the Design and Construction Phase
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 3
Abstract
Structural failures occur worldwide. Various investigations have concluded that the primary causes of failure were design and construction errors within the building process. However, the exact factors that played a significant role were not clear. Therefore, the primary focus of this study is to improve structural safety by determining the influencing factors for structural safety within the design and construction process. First, a theoretical framework was developed, based on safety science and management literature. In particular, the concept of critical success factors, the factors within projects that are essential to reach the stated goals, appeared to be useful for this research. The factors mentioned in the literature played a role within some documented structural failures in the Netherlands. Based on this framework, a questionnaire was established. In this questionnaire, participants from the building industry were asked to indicate the extent to which factors from the theoretical framework were present in successful and less successful projects. In addition, they were asked to select the greatest determining factors for structural safety, in their opinion, from a list of possible factors. The results were statistically analyzed. Factors concerning the interrelations between various project partners had the largest impact on structural safety: communication and collaboration, control mechanisms, allocation of responsibilities, structural risk management, safety culture, and knowledge infrastructure. These factors will be designated the critical factors for structural safety, which are essential to assure structural safety within projects.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Authors would like to express their gratitude to the Platform Structural Safety for collaboration in this project and to CUR Bouw & Infra for financial support.
References
Akinsola, A. O., Potts, K. F., Ndekugri, I., and Harris, F. C. (1997). “Identification and evaluation of factors influencing variations on building projects.” Int. J. Proj. Manage., 15(4), 263–267.
Ashley, D. B., Lurie, C. S., and Jaselskis, E. A. (1987). “Determinants of construction project success.” Proj. Manage. J., 18(2), 69–79.
Belassi, W., and Tukel, O. I. (1996). “A new framework for determining critical success/failure factors in projects.” Int. J. Proj. Manage., 14(3), 141–151.
Chan, A. P. C., Scott, D., and Chan, A. P. L. (2004). “Factors affecting the success of a construction project.” J. Constr. Eng. Manage., 153–155.
Chua, D. K. H., Kog, Y. C., and Loh, P. K. (1999). “Critical success factors for different project objectives.” J. Constr. Eng. Manage., 142–150.
Clifford, M. M., and Walster, E. (1973). “The effect of physical attractiveness on teacher expectations.” Soc. Educ., 46(2), 248–258.
Centre for Execution of Research and Regulation (CUR) Bouw en Infra. (2010). Falende constructies: Case-onderzoek naar structurele oorzaken van falen en maatregelen die dat tegengaan, CURnet, Gouda, Netherlands, 232.
Centre for Execution of Research and Regulation (CUR) Bouw en Infra. (2011). “Constructieve veiligheid evaluatie ABCmeldpunt: Structurele verbetering?” CURnet, Gouda, Netherlands, 235.
Diekmann, J. E., and Girard, M. J. (1995). “Are contract disputes predictable?” J. Constr. Eng. Manage., 355–363.
Dijkshoorn, G. W., Terwel, K. C., and Guldenmund, F. W. (2014). “Determining critical factors to avoid failures in the building process.” Safety, reliability and risk analysis: Beyond the horizon-ESREL 2013, R. D. J. M. Steenbergen, et al., eds., Taylor and Francis Group, London.
Dutch Safety Board. (2012a). Instorten van het dak van de aanbouw van het stadion van FC Twente, te Enschede, Dutch Safety Board, The Hague, Netherlands.
Dutch Safety Board. (2012b). Instorting verdiepingsvloer B-tower Rotterdam, Dutch Safety Board, The Hague, Netherlands.
Favie, R. (2010). “Quality monitoring in infrastructural design-build projects. Faculty of architecture building and planning.” Ph.D. thesis, TU Eindhoven, Eindhoven, Netherlands.
Fleming, M. (2000). “Safety culture maturity model.” Offshore Technology Rep., Health and Safety Executive, Norwich.
Fruehwald, E., Serrano, E., Toratti, T., Emilsson, A., and Thelandersson, S. (2007). Design of safe timber structures—How can we learn from structural failures in concrete, steel and timber? Lund Institute of Technology, Lund, Sweden.
Groeneweg, J. (1992). “Controlling the controllable, the management of safety.” Ph.D. thesis, Centre for Safety Research, Univ. of Leiden, Leiden, Netherlands.
Guldenmund, F., Hale, A., Goossens, L., Betten, J., and Duijm, N. J. (2006). “The development of an audit technique to assess the quality of safety barrier management.” J. Hazard. Mater., 130(3), 234–241.
Guldenmund, F. W. (2010). Understanding and exploring safety culture, BOXpress, Oisterwijk, Netherlands.
Hollnagel, E. (1998). Cognitive reliability and error analysis method (CREAM), Elsevier, New York.
Inspectorate of Housing, Spatial Planning and environment (VROM)-Inspectie. (2003). Patio-Sevilla, Maastricht, Netherlands.
ISO. (2005). “Quality management systems-fundamentals and vocabulary.” ISO 9000, Geneva, Switzerland.
ISO. (2008). “Quality management systems—Requirements.” ISO 9001, Geneva, Switzerland.
Kool, E., Kolner, W. W. P., and van der Meer, J. (2003). Instortingen van lichte platte daken, VROM-Inspectie, Den Haag, Netherlands.
Kool, E. J., and Schmidt, T. H. (2006). Bouwkundige schades t.g.v. sneeuwval, onderzoek naar de gebeurtenissen in het weekend van 26/27 November 2005, VROM-Inspectie Oost, Arnhem, Netherlands.
Lam, E. W. M., Chan, A. P. C., and Chan, D. W. M. (2008). “Determinants of successful design-build projects.” J. Constr. Eng. Manage., 333–341.
Morris, P. W. G. (1989). “Initiating major projects: The unperceived role of project management.” Int. J. Proj. Manage., 7(3), 180–185.
Pinto, J. K., and Covin, J. G. (1989). “Critical factors in project implementation: A comparison of construction and R&D projects.” Technovation, 9(1), 49–62.
Rockart, J. F. (1982). “The changing role of the information systems executive: A critical success factors perspective.” Sloan Manage. Rev., 24(1), 3–13.
Sanvido, V., Grobler, F., Parfitt, K., Guvenis, M., and Coyle, M. (1992). “Critical success factors for construction projects.” J. Constr. Eng. Manage., 94–111.
Schein, E. (2010). Organizational culture and leadership, Jossey-Bass, San Francisco.
Schneider, J., and Matousek, M. (1976). Untersuchungen zur struktur des Sicherheitsproblems bei Bauwerken, Institut fuer Baustatik und Konstruktion, ETHZ, Zuerich, Switzerland.
Terwel, K. C., Boot, W. F., and Nelisse, R. M. L. (2013). “Structural incidents in The Netherlands: A comparison of three databases.” 5th Int. Conf. on Forensic Engineering 2013: Informing the Future with Lessons from the Past, C. Georgopoulos, ed., ICE, London.
Terwel, K. C., and Vambersky, J. N. J. A. (2012). “Possible critical structural safety factors: A literature review.” Forensic engineering 2012: Gateway to a safer tomorrow, ASCE, Reston, VA.
Toriizuka, T. (2001). “Application of performance shaping factor (PSF) for work improvement in industrial plant maintenance tasks.” Int. J. Ind. Ergon., 28(3–4), 225–236.
Van Duin, M. J. (1992). “Van rampen leren.” Ph.D. thesis, Univ. of Leiden, Den Haag, Netherlands.
Van Hattum en Blankevoort. (2013). “Van hattum en blankevoort.” 〈www.vhbinfra.nl〉 (Aug. 2013).
Wood, J. G. M. (2005). “Forensic investigation: The true calibrator of design limit states.” 3rd Int. Conf. on Forensic Engineering: Forensic Engineering: Diagnosing Failures and Solving Problems, Taylor and Francis, London.
Information & Authors
Information
Published In
Journal of Performance of Constructed Facilities
Volume 29 • Issue 3 • June 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Aug 27, 2013
Accepted: Dec 11, 2013
Published online: Aug 4, 2014
Discussion open until: Jan 4, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.