Method for Energy Performance Integration in Corporate Public Real Estate Management
Publication: Journal of Performance of Constructed Facilities
Volume 28, Issue 2
Abstract
Building-performance assessment is receiving increased attention within the building industry because of the European Union’s (EU’s) targets to improve energy efficiency and to increase the use of renewable energy technologies. In this context, there is great emphasis placed on the existing building stock as having a huge environmental impact. The continuous assessment of the energy performance of existing buildings comes into focus to ensure the intended performance and operation during the building life cycle. This paper introduces the Energy Performance Integration in Public Corporate Real Estate Management (EPI-CREM) initiative that aims to improve the energy performance and rational use of energy across the public building stock in Europe by embedding energy-saving measures into the existing public corporate real estate management (REM) processes. To this end, EPI-CREM focuses on the integration of energy-improving actions into the long-term maintenance plans of existing buildings. In this paper, the EPI-CREM method and supporting tools are discussed from a functional point of view, followed by an evaluation of the method based on the results of its implementation on pilot buildings in three participating EU countries.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The EPI-CREM project is supported by the Intelligent Energy Europe program under Contract No: EIE/07/129/S12.467632. The contributions of the Dutch Ministry of Infrastructure and the Environment (formerly Ministry of Housing, Spatial Planning, and the Environment), Builddesk, energie:bewusst Kärnten, Österreichische Energieagentur (AEA), Centre Scientifique et Technique du Bâtiment (CSTB), and EBM-consult BV are most gratefully acknowledged.
References
Akcamete, A., Akinci, B., and Garrett, J. H., Jr. (2009). “Motivation for computational support for updating building information models (BIMs).” ASCE Int. Workshop on Computing in Civil Engineering ASCE, Reston, VA.
Bostenaru Dan, M. D. (2004). “Multi-criteria decision model for retrofitting existing buildings.” Nat. Hazards Earth Syst. Sci., 4, 485–499.
Caccavelli, D., and Gugerli, H. (2002). “TOBUS—A European diagnosis and decision-making tool for office building upgrading.” Energy Build., 34(2), 113–119.
Commission of the European Communities (CEC). (2008). “First assessment of national energy efficiency action plans.” Directive 2006/32/EC on Energy, End-Use Efficiency and Energy Services, Brussels, Belgium.
Chanter, B., and Swallow, P. (2007). Building maintenance management, 2nd Ed., Wiley-Blackwell, Oxford, U.K.
CLIP [Computer software]. Delft, Netherlands, Delft Univ. of Technology.
Cox, L. A., Jr. (2008). “What’s wrong with risk matrices?” Risk Anal., 28(2), 497–512.
Diakaki, C., Grigoroudis, E., Kabelis, N., Kolokotsa, D., Kalaitzakis, K., and Stavrakakis, G. (2010). “A multi-objective decision model for the improvement of energy efficiency in buildings.” Energy, 35(12), 5483–5496.
IDEF. (2009). “IDEF0 function modeling method.” 〈http://www.idef.com/idef0.htm〉 (Jan. 9, 2014).
Juan, Y. K., Kim, J. H., Roper, K., and Castro-Lacouture, D. (2009). “GA-based decision support system for housing condition assessment and refurbishment strategies.” Autom. Construct., 18(4), 394–401.
Kaklauskas, A., Zavadskas, E. K., and Raslanas, S. (2005). “Multivariant design and multiple criteria analysis of building refurbishments.” Energy Build., 37(4), 361–372.
Katzengruber, R. (2010). “Evaluation of the EPI-CREM embedding approach and software tool in 20 nonresidential buildings: France, Netherlands and Austria.” Technical Rep. EIE/07/129/S12.467632-05, energie: bewusst Kärnten, Klagenfurt, Austria.
Kazmierczyk, P., and Reichel, A. (2010). The European environment state and outlook 2010: Material resources and waste, European Environment Agency, Copenhagen, Denmark.
Kohler, N., and Hassler, U. (2002). “The building stock as a research object.” Build. Res. Inform., 30(4), 226–236.
Langston, C., and Smith, J. (2012). “Modelling property management decisions using ‘iconCUR’.” Autom. Construct., 22(March), 406–413.
Martinaitis, V., Kazakevičius, E., and Vitkauskas, A. (2007). “A two-factor method for appraising building renovation and energy efficiency improvement projects.” Energy Policy, 35(1), 192–201.
Mickaitytė, A., Zavadskas, E. K., Kaklauskas, A., and Tupėnaitė, L. (2008). “The concept model of sustainable buildings refurbishment.” Int. J. Strategic Prop. Manage., 12(1), 53–68.
Montazemi, A. R., Wang, F., Khalid Nainar, S., and Bart, C. K. (1996). “On the effectiveness of decisional guidance.” Decis. Support Syst., 18(2), 181–198.
Ooijevaar, O., and Tiekstra, C. (2010). Guidance book and reference manual: EPI-CREM embedding approach, Ministry of Housing, Spatial Planning and Environment, The Hague, Netherlands.
O’Sullivan, D., Keane, M., Kelliher, D., and Hitchcock, R. (2004). “Improving building operation by tracking performance metrics throughout the building lifecycle (BLC).” Energy Build., 36(11), 1075–1090.
Poel, B., Sonnemans, E., Balaras, C., Wittchen, K., and Lechner, R. (2004). “Guideline for inspection protocol.” Rep. No. 040447ap, EBM Consult, Arnhem, Netherlands.
Poel, B., van Cruchten, G., and Balaras, C. A. (2007). “Energy performance assessment of existing dwellings.” Energy Build., 39(4), 393–403.
Rijksgebouwendienst. (2009). “RgdBOEI: inspecties nieuwe stijl.” 〈http://www.rgd.nl/onderwerpen/diensten/rgdboei-inspecties/〉 (Apr. 14, 2012).
Rosenfeld, Y., and Shohet, I. M. (1999). “Decision support model for semi-automated selection of renovation alternatives.” Autom. Construct., 8(4), 503–510.
Silver, M. S. (1990). “Decision support systems: Directed and nondirected change.” Inf. Syst. Res., 1(1), 47–70.
Thomsen, A., Schultmann, F., and Kohler, N. (2011). “Deconstruction, demolition and destruction.” Build. Res. Inform., 39(4), 327–332.
Thomsen, A., and van der Flier, K. (2011). “Understanding obsolescence: A conceptual model for buildings.” Build. Res. Inform., 39(4), 352–362.
Tupenaite, L., Zavadskas, E. K., Kaklauskas, A., Turskis, Z., and Seniut, M. (2010). “Multiple criteria assessment of alternatives for built and human environment renovation.” J. Civ. Eng. Manage., 16(2), 257–266.
United Nations Economic Commission for Europe (UNECE). (2002). Bulletin of housing and building statistics for Europe and North America, Geneva.
Van Lokven, J. (2006). Conditiemeting van bouw- en installatiedelen - Deel 1: 875 8 Methodiek, Nederlands Normalisatie-instituut, Delft, Netherlands.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 6, 2012
Accepted: Dec 11, 2012
Published online: Dec 13, 2012
Published in print: Apr 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.