Performance of Micropiles Used to Underpin Highway Bridges
Publication: Journal of Performance of Constructed Facilities
Volume 28, Issue 3
Abstract
Micropiles, which are small-diameter, drilled piles, are being used more frequently to support structures where it is not feasible to use driven piles or larger-diameter, drilled shafts because of conditions such as limited overhead or restraints on vibrations. The construction procedures used for micropiles typically include the performance of verification load tests (i.e., compression load tests to 2.5 times the design capacity on test piles) and the performance of proof tests (i.e., load tests on a limited number of production piles, typically about 5%, to 1.67 times the design capacity). Because of concerns over postconstruction settlement and the difficulty of proof loading individual production piles to 1.67 times the design capacity, all production micropiles used to underpin four bridges were preloaded, and the deflection of each pile was measured to verify acceptable postconstruction performance. The collection of deflection data for such a large number of production micropiles is unusual and serves as a valuable case study showing the successful performance of drilled micropiles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the following who contributed to the success of the project: New Jersey Turnpike Authority—Owner; Fay, Spofford & Thorndike, LLC—Design Engineer; Matrix New World Engineering, Inc.—Geotechnical Subconsultant; Greenman-Pedersen, Inc.—Resident Engineer; Oweis Engineering, Inc.—Resident Engineer’s Geotechnical Consultant; PKF Mark III—Contractor; and Schnabel Engineering North LLC—Contractor’s Geotechnical Consultant.
References
Armour, T., Groneck, P., Keeley, J., and Sharma, S. (2000). “Micropile design and construction guidelines implementation manual: Priority Technologies Program (PTP) project.” Rep. No. FHWA-SA-97-070, U.S. Dept. of Transportation, Federal Highway Administration, Washington, DC.
Holman, T. P., and Barkauskas, B. D. (2007). “Mechanics of micropile performance from instrumented load tests.” Proc., 7th Int. Symp. on Field Measurements in Geomechanics, ASCE, Reston, VA, 1–14.
Huang, Y., Hajduk, E. L., Lipka, D. S., and Adams, J. C. (2007). “Micropile load testing and installation monitoring at the CATS Vehicle Maintenance Facility.” Proc., GeoDenver 2007: Contemporary Issues in Deep Foundations, ASCE, Reston, VA, 1–10.
Martin, P. D. (2009). “Micropile foundations for ESSROC cement plant expansion.” Proc., GeoFlorida 2009: Contemporary Topics in Deep Foundations, ASCE, Reston, VA, 375–382.
Sabatini, P. J., Burak, T., Armour, T., Groneck, P., and Keeley, J. (2005). “Micropile design and construction (reference manual for NHI Course 132078).” Rep. No. FHWA-NHI-05-039, National Highway Institute, Federal Highway Administration, Washington, DC.
Splitstone, D. E., Stonecheck, S. A., Dodson, R. L., and Fuller, J.A. (2010). “Birmingham bridge emergency repairs: Micropile foundation retrofit.” Proc., GeoFlorida 2010: Advances in Analysis, Modeling & Design, ASCE, Reston, VA, 1479–1487.
Wolosick, J. R. (2009). “Ultimate micropile bond stresses observed during load testing in clays and sands.” Proc., GeoFlorida 2009: Contemporary Topics in Deep Foundations, ASCE, Reston, VA, 12–22.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 18, 2012
Accepted: Dec 10, 2012
Published online: Dec 12, 2012
Published in print: Jun 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.