Research on Stress Spectrum of Steel Decks in Suspension Bridge Considering Measured Traffic Flow
Publication: Journal of Performance of Constructed Facilities
Volume 26, Issue 1
Abstract
This study investigated the traffic-induced stresses in the steel deck of a suspension bridge on the Yangtze River, taking into account the dependence of Young’s modulus of asphalt pavement on temperature. In particular, the stress spectra of local areas in the steel deck were studied. On the basis of the massive traffic data collected by a bridge toll system over one month, traffic composition and the vehicle load were statistically analyzed, and then a random traffic flow model that reflected the statistical characteristics of actual traffic flow, was generated. Through a bridge dynamic analysis of the random traffic flow model, a segment of the steel box girder which experiences the greatest stress was selected. The local stress variation and the stress spectrum under traffic flow were analyzed using a finite-element model (FEM). In the FEM analysis process, the impact of the temperature on mechanical properties of the asphalt pavement was considered. The results show that the middle segment of the main span has the largest moment amplitude. In addition, it was observed that the variation of Young’s modulus of asphalt pavement resulting from temperature change can significantly affect the stress of the steel box girder and the stress spectrum at different local areas in steel deck.
Get full access to this article
View all available purchase options and get full access to this article.
References
British Standard Institution. (2000).“Steel, concrete and composite bridge.” BS5400, 2nd Ed., London.
Chae, M. J., Yoo, H. S., Kim, J. Y., and Cho, M. Y. (2012). “Development of a wireless sensor network system for suspension bridge health monitoring.” Autom. Constr., 21, 237–252.
Connor, R. J., and Fisher, J. W. (2006). “Consistent approach to calculating stresses for fatigue design of welded rib-to-web connections in steel orthotropic bridge decks.” J. Bridge Eng., 11(5), 517–528.
Dexter, R. J., Wright, W. J., and Fisher, J. W. (2004). “Fatigue and fracture of steel girders.” J. Bridge Eng., 9(3), 278–286.
Imam, B. M., and Righiniotis, T. D. (2010). “Fatigue evaluation of riveted railway bridges through global and local analysis.” J. Constr. Steel Res., 66(11), 1411–1421.
Ji, L., and Feng, Z. X. (2001). “Dynamic load testing and analysis for Jiangyin Bridge.” East China Highway, 128(1), 36–39.
Jiangyin Yangtze River Highway Bridge Management Center. (2001). Jiangyin Yangtze River Highway Bridge maintenance manual, 1st Ed., Jiangsu, P.R. China.
Kwasniewski, L., Li, H., Wekezer, J., and Malachowski, J. (2006). “Finite element analysis of vehicle—bridge interaction.” Finite Elem. Anal. Des., 42(11), 950–959.
Leander, J., Andersson, A., and Karoumi, R. (2010). “Monitoring and enhanced fatigue evaluation of a steel railway bridge.” Eng. Struct., 32(3), 854–863.
Mei, G., Qin, Q., and Lin, D. J. (2003). “Bi-modal probabilistic model of highway and bridge vehicle loads.” J. Tsinghua Univ., Sci. Technol., 43(10), 1394–1396.
Mori, T., Lee, H. H., and Kyung, K. S. (2007). “Fatigue life estimation parameter for short and medium span steel highway girder bridges.” Eng. Struct., 29(10), 2762–2774.
Song, M. K., Noh, H. C., and Choi, C. K. (2003). “A new three-dimensional finite element analysis model of high-speed train—bridge interactions.” Eng. Struct., 25(13), 1611–1626.
Tsakopoulos, P. A., and Fisher, J. W. (2003). “Full-scale fatigue tests of steel orthotropic decks for the Williamsburg Bridge.” J. Bridge Eng., 8(5), 323–333.
Wang, H., Li, A. Q., Guo, T., and Zhao, G. W. (2009a). “Experimental study of the steel box girder force state for a long-span suspension bridge under vehicle loads.” J. Exp. Mech., 24(1), 28–33.
Wang, Y., Wu, B. J., and Li, Z. X. (2009b). “Comparison study on fatigue stresses in steel box girder of long span cable bridges.” J. Vib. Shock, 28(2), 86–91.
Wu, C., Liu, H. Y., and Zhang, S. L. (2010). “Influence of pavement on fatigue stress range of orthotropic steel deck.” Eng. Sci., 12(7), 39–42.
Zhang, Q. L., Vrouwenvelder. A., and Wardenier, J. (2000). “Dynamic analysis and behaviors of bridges under traffic flows.” Adv. Struct. Dyn., 10, 585–592.
Zhang, Q. W. (2002). “Model updating of a suspension bridge using ambient vibration measurements.” J. Vib. Eng., 15(1), 74–78.
Zhou, Y. T., Zhai, H., Bao, W. G., and Liu, Y. F. (2009). “Research on standard fatigue vehicular load for highway bridges.” Highway, 12, 21–25.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jan 20, 2011
Accepted: May 19, 2011
Published online: May 21, 2011
Published in print: Feb 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.