Emerging Trends in Failures Involving EPS-Block Geofoam Fills
Publication: Journal of Performance of Constructed Facilities
Volume 24, Issue 4
Abstract
Expanded polystyrene (EPS) is a closed-cell polymeric (“plastic”) foam that, in its generic block-molded form, has seen increasing use worldwide as a cellular geosynthetic in the geofoam category. This growth is due to the fact that block-molded EPS is unique among geofoam products for the large and diverse variety of functional applications for which it is technically well suited and relatively economical as well as for its proven long-term in-ground durability. However, as often happens when there is rapid growth in a technology based on a generic commodity product such as block-molded EPS, its use outstrips the acquisition of critically important technical knowledge by end users. This can result in inefficient and even incorrect use that can lead to failures in project applications. There is evidence that this cause and effect is currently occurring in the United States at least for some widely used EPS-block geofoam functional applications such as lightweight fill for road construction. This paper contains a summary of the technical issues that are significant factors in the observed failures of EPS-block geofoam fills, with an emphasis on emerging trends observed in recent years. This presentation is intended to provide critical information for design professionals, material suppliers, construction contractors, and owners alike so that they are aware of the key technical issues that require careful attention when designing EPS-block geofoam fills in practice.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper would not have been possible without the generous input and sharing of knowledge by many people throughout the world since the writer began researching EPS as a civil engineering material in 1987. However, all assessments and opinions expressed herein are those of the writer and do not necessarily reflect the views of others.
References
Arellano, D., Stark, T. D., Horvath, J. S., and Leshchinsky, D. (2009). “Guidelines for geofoam applications in slope stability projects.” NCHRP Project No. 24-11(02), TRB, Washington, D.C.
Arellano, D., Tatum, J. B., Stark, T. D., Horvath, J. S., and Leshchinsky, D. (2010). “A framework for the design guideline for EPS-block geofoam in slope stabilization and repair.” Proc., 89th Transportation Research Board Annual Meeting, Paper No. 10-2629, TRB, Washington, D.C., also, Transportation Research Record: J. Transportation Research Board, in press.
Horvath, J. S. (1995). Geofoam geosynthetic, Horvath Eng., Scarsdale, N.Y.
Horvath, J. S. (1999a). “Geofoam and geocomb: Lessons from the second millennium A.D. as insight for the future.” Proc.,13th GRI Conf., Geosynthetic Information Institute, Folsom, Pa., 72–104.
Horvath, J. S. (1999b). “Geofoam and geocomb: Lessons from the second millennium A.D. as insight for the future.” Research Rep. No. CE/GE-99-2, Dept. of Civil Engineering, Manhattan College, Bronx, N.Y.
Horvath, J. S. (1999c). “Lessons learned from failures involving geofoam in roads and embankments.” Research Rep. No. CE/GE-99-1, Dept. of Civil Engineering, Manhattan College, Bronx, N.Y.
Horvath, J. S. (2004). “Lessons learned from failure: EPS geofoam.” Geotech. Fabr. Rep., 21(8), 34–37.
Horvath, J. S. (2009). “Manufacturing quality issues for block-molded expanded polystyrene geofoam.” J. Mater. Civ. Eng., submitted for publication.
Stark, T. D., Arellano, D., Horvath, J. S., and Leshchinsky, D. (2004a). “Geofoam applications in the design and construction of highway embankments.” NCHRP Web Document No. 65, TRB, Washington, D.C.
Stark, T. D., Arellano, D., Horvath, J. S., and Leshchinsky, D. (2004b). “Guideline and recommended standard for geofoam applications in highway embankments.” NCHRP Rep. No. 529, TRB, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 8, 2009
Accepted: Dec 28, 2009
Published online: Jul 15, 2010
Published in print: Aug 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.