Compressive Behavior of Masonry Columns Confined with FRCM Systems: Research Overview and Analytical Proposals
Publication: Journal of Composites for Construction
Volume 26, Issue 3
Abstract
Fabric–reinforced cementitious matrix (FRCM) composites have emerged as a viable solution for the external confinement of deficient masonry members. They represent an appealing alternative to fiber–reinforced polymer (FRP) systems since the use of epoxy matrixes raises some unsolved issues, such as the poor composite–substrate compatibility, low permeability of the strengthened surface, and the difficulties in removing the FRP sheets without damaging the substrate. To investigate the efficacy of FRCM confinement, a number of experimental investigations have been published in the literature, and a wide overview will be reported in this paper. However, to date there is a lack of relevant analytical studies that propose sound models to estimate the compressive strength of FRCM confined masonry; difficulties are related to the high complexity and heterogeneity of the masonry and to the uncertainties that are derived from FRCM confinement, whose performance is affected by many variables, which include the quality of the inorganic matrix and geometry of the fabric mesh. Most of the collected studies focus on investigating the applicability of the existing formulations that are suitable for FRP systems to examples of FRCMs, a few others provide promising proposals although they were validated using a limited amount of experimental data. This paper will present an analytical study on the confinement of masonry columns with FRCM composites with two aims: (a) propose new models to estimate the compressive strength; and (b) assess the existing formulas. A wide database that includes the results of compression tests on 211 masonry members that are externally wrapped with FRCM systems will be assembled from the literature. The collected data will be organized into a systematic framework and will be analyzed based on some relevant parameters, such as the type of fiber [e.g., basalt (B), carbon (C), glass (G), steel (S), and poliparafenilenbenzobisoxazole (PBO)], the geometry of the mesh, number of layers employed, mechanical properties of the inorganic matrix, and compressive strength of the unconfined masonry (fmc). Strength models for FRCM confined masonry will be developed by best-fit analyses, and comparisons with formulations that are available in the literature and some international guidelines will be performed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support by ReLUIS (Network of the Italian University Laboratories for Seismic Engineering - Italian Department of Civil Protection) is gratefully acknowledged (Executive Project 2019-21 - WP14).
Notation
The following symbols are used in this paper:
- B
- width of square or rectangular cross section;
- BD
- bidirectional strengthening sheet;
- CV(Err)
- error variation coefficient;
- D
- diameter of circular cross section;
- DB
- debonding of the reinforcement at the overlap region;
- Ef
- elastic modulus of dry strengthening sheet;
- Ei
- ith error calculated according to either MAPE or MSE error;
- Emat
- elastic modulus in compression of FRCM matrix;
- mean absolute percentage error;
- mean square error;
- FM
- dominant failure mode exhibited by test specimens;
- fmat,b
- flexural strength of FRCM matrix;
- fmat,c
- compressive strength of FRCM matrix;
- ff,u,
- ultimate tensile strength of dry strengthening sheet;
- fl
- lateral confining pressure of FRCM confinement;
- fl,eff
- effective lateral confining pressure of FRCM confinement;
- normalized effective lateral confining pressure;
- fmat,c
- compressive strength of inorganic matrix and masonry;
- fmc
- compressive strength of unconfined masonry;
- normalized compressive strength of FRCM confined masonry;
- experimental value of normalized compressive strength of FRCM confined masonry;
- theoretical value of normalized compressive strength of FRCM confined masonry;
- i-th experimental value of normalized compressive strength of FRCM confined masonry;
- i-th theoretical value of normalized compressive strength of FRCM confined masonry;
- fm0
- compressive strength of unconfined masonry column;
- H
- depth of square/rectangular cross section;
- JF
- jacket failure;
- keff
- FRCM confinement efficiency coefficient;
- kh
- coefficient of horizontal efficiency of FRCM confinement;
- kmat
- coefficient of FRCM confinement efficiency related to the presence of inorganic matrix;
- kv
- coefficient of vertical efficiency of FRCM confinement;
- kɛ
- strain efficiency factor of the FRCM system;
- L
- height of specimen;
- Lb
- overlapping length of the FRCM wrap;
- N
- number of specimens;
- n
- number of data sets;
- nf
- number of FRCM layers;
- rc
- corner radius;
- S
- fiber–matrix slippage;
- tf
- equivalent thickness of the single layer of the fiber sheet;
- tmat
- overall thickness of the FRCM matrix;
- UD
- unidirectional strengthening sheet;
- α1, α2, …, α5
- fine-tuning model coefficients;
- γf
- density of strengthening sheet;
- gm
- masonry mass density;
- ɛf,u
- ultimate strain of dry strengthening sheet;
- ɛj,u
- ultimate hoop strain experimentally measured in FRCM jacket; and
- ρmat
- matrix reinforcement ratio.
References
ACI (American Concrete Institute). 2017. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-17. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2020. Guide to design and construction of externally bonded fabric-reinforced cementitious matrix (FRCM) systems for repair and strengthening concrete and masonry structures. ACI 549.4R-20. Farmington Hills, MI: ACI.
Aiello, M. A., A. Cascardi, L. Ombres, and S. Verre. 2020. “Confinement of masonry columns with the FRCM-system: Theoretical and experimental investigation.” Infrastructures 5 (11): 101. https://doi.org/10.3390/infrastructures5110101.
Aiello, M. A., et al. 2021. “Masonry columns confined with fabric reinforced cementitious matrix systems: A round robin test.” Constr. Build. Mater. 298: 123816. https://doi.org/10.1016/j.conbuildmat.2021.123816.
Alecci, V., F. Focacci, L. Rovero, G. Stipo, and M. De Stefano. 2017. “Intrados strengthening of brick masonry arches with different FRCM composites: Experimental and analytical investigations.” Compos. Struct. 176: 898–909. https://doi.org/10.1016/j.compstruct.2017.06.023.
Bhuvaneshwari, P., K. S. R. Mohan, and R. Kirthiga. 2014. “Stress strain behaviour of concrete element retrofitted using organic and inorganic binders.” Asian J. Appl. Sci. 7 (4): 215–223. https://doi.org/10.3923/ajaps.2014.215.223.
Carloni, C., C. Mazzotti, M. Savoia, and K. V. Subramaniam. 2015. “Confinement of masonry columns with PBO FRCM composites.” Key Eng. Mater. 624: 644–651. https://doi.org/10.4028/www.scientific.net/KEM.624.644.
Cascardi, A., F. Longo, F. Micelli, and M. A. Aiello. 2017. “Compressive strength of confined column with fiber reinforced mortar (FRM): New design-oriented-models.” Constr. Build. Mater. 156: 387–401. https://doi.org/10.1016/j.conbuildmat.2017.09.004.
Cascardi, A., F. Micelli, and M. A. Aiello. 2018. “FRCM-confined masonry columns: Experimental investigation on the effect of the inorganic matrix properties.” Constr. Build. Mater. 186: 811–825. https://doi.org/10.1016/j.conbuildmat.2018.08.020.
CEN (European Committee for Standardization). 2002. Eurocode 0: Basis of structural design. EN 1990:2002. Brussels, Belgium: CEN.
CNR (National Research Council). 2013. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. CNR-DT200 R1. Rome: CNR.
CNR (National Research Council). 2018. Guide for the design and construction of externally bonded fibre reinforced inorganic matrix systems for strengthening existing structures (version: June, 2020). CNR-DT 215/2018. Rome: CNR.
D’Ambrisi, A., L. Feo, and F. Focacci. 2013. “Experimental and analytical investigation on bond between carbon-FRCM materials and masonry.” Composites, Part B 46: 15–20. https://doi.org/10.1016/j.compositesb.2012.10.018.
D’Anna, J., G. Amato, J. F. Chen, G. Minafò, and L. La Mendola. 2021. “Experimental investigation on BFRCM confinement of masonry cylinders and comparison with BFRP system.” Constr. Build. Mater. 297: 123671. https://doi.org/10.1016/j.conbuildmat.2021.123671.
D’Antino, T., F. G. Carozzi, P. Colombi, and C. Poggi. 2018. “Out-of-plane maximum resisting bending moment of masonry walls strengthened with FRCM composites.” Compos. Struct. 202: 881–896. https://doi.org/10.1016/j.compstruct.2018.04.054.
de Felice, G., et al. 2018a. “State of the art of steel reinforced grout applications to strengthen masonry structures.” ACI Spec. Publ. 326: 102.1–102.12.
de Felice, G., et al. 2018b. “Recommendation of RILEM technical committee 250-CSM: Test method for textile reinforced mortar to substrate bond characterization.” Mater. Struct. 51 (4): 95. https://doi.org/10.1617/s11527-018-1216-x.
De Santis, S., et al. 2017. “Round Robin test on tensile and bond behaviour of steel reinforced grout systems.” Composites, Part B 127: 1–120. https://doi.org/10.1016/j.compositesb.2017.06.020.
Di Ludovico, M., A. Prota, and G. Manfredi. 2010. “Structural upgrade using basalt fibers for concrete confinement.” J. Compos. Constr. 14 (5): 541–552. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000114.
Di Ludovico, M., A. Cascardi, A. Balsamo, and M. A. Aiello. 2020. “Uniaxial experimental tests on full-scale limestone masonry columns confined with glass and basalt FRCM systems.” J. Compos. Constr. 24 (5): 04020050. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001061.
Estevan, L., F. J. Baeza, D. Bru, and S. Ivorra. 2020. “Stone masonry confinement with FRP and FRCM composites.” Constr. Build. Mater. 237: 117612. https://doi.org/10.1016/j.conbuildmat.2019.117612.
Faella, C., A. Napoli, and R. Realfonzo. 2020. “Confinement of concrete with FRCM materials.” Lect. Notes Civ. Eng. 42: 360–371. https://doi.org/10.1007/978-3-030-23748-6_28.
Fossetti, M., and G. Minafò. 2016. “Strengthening of masonry columns with BFRCM or with steel wires: An experimental study.” Fibers 4 (15): 1–10.
García, D., P. Alonso, J. T. San-José, L. Garmendia, and C. Perlot. 2010. “Confinement of medium strength concrete cylinders with basalt textile reinforced mortar.” In Proc., 13th Int. Congress on Polymers in Concrete. Braga, Portugal: University of Minho.
ICOMOS/Iscarsah Committee. 2005. “Recommendations for the analysis, conservation and structural restoration of architectural heritage.” Accessed June 15, 2021. http://www.icomos.org.
Incerti, A., A. Vasiliu, B. Ferracuti, and C. Mazzotti. 2015. “Uni-axial compressive tests on masonry columns confined by FRP and FRCM.” In Proc., 12th Int. Symp. on Fiber Reinforced Polymers for Reinforced Concrete Structures and 5th Asia-Pacific Conf. on Fiber Reinforced Polymers in Structures. Edited by Z. Wu, G. Wu, and X. Wang. Dhaka, Bangladesh: Southeast University.
Kouris, L. A. S., and T. C. Triantafillou. 2018. “State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM).” Constr. Build. Mater. 188: 1221–1233. https://doi.org/10.1016/j.conbuildmat.2018.08.039.
Koutas, L. N., and D. A. Bournas. 2020. “Confinement of masonry columns with textile-reinforced mortar jackets.” Constr. Build. Mater. 258: 120343. https://doi.org/10.1016/j.conbuildmat.2020.120343.
Krevaikas, T. 2015. “Textile Reinforced Mortar System as a means for confinement of masonry structures.” In Proc., 12th Int. Symp. on Fiber Reinforced Polymers for Reinforced Concrete Structures and 5th Asia-Pacific Conf. on Fiber Reinforced Polymers in Structures. Edited by Z. Wu, G. Wu, and X. Wang. Dhaka, Bangladesh: Southeast University.
Krevaikas, T. 2019. “Experimental study on carbon fiber textile reinforced mortar system as a means for confinement of masonry columns.” Constr. Build. Mater. 208: 723–733. https://doi.org/10.1016/j.conbuildmat.2019.03.033.
Krzywoń, R. 2020. “Steel-reinforced polymers and steel-reinforced composite mortars for structural applications—An overview.” J. Compos. Sci. 4 (3): 142. https://doi.org/10.3390/jcs4030142.
Maddaloni, G., A. Cascardi, A. Balsamo, M. Di Ludovico, F. Micelli, M. A. Aiello, and A. Prota. 2017. “Confinement of full-scale masonry columns with FRCM systems.” Key Eng. Mater. 747: 374–381. https://doi.org/10.4028/www.scientific.net/KEM.747.374.
Mezrea, P. E., M. Ispir, E. Binbir, I. E. Bal, and A. Ilki. 2017. “External jacketing of unreinforced historical masonry piers with open-grid basalt-reinforced mortar.” J. Compos. Constr. 21 (3): 04016110. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000770.
Minafò, G., and L. La Mendola. 2018. “Experimental investigation on the effect of mortar grade on the compressive behaviour of FRCM confined masonry columns.” Composites, Part B 146: 1–12. https://doi.org/10.1016/j.compositesb.2018.03.033.
Murgo, F. S., and C. Mazzotti. 2019. “Masonry columns strengthened with FRCM system: Numerical and experimental evaluation.” Constr. Build. Mater. 202: 208–222. https://doi.org/10.1016/j.conbuildmat.2018.12.211.
Napoli, A., and R. Realfonzo. 2016. “Compressive behavior of concrete confined by SRP wraps.” Constr. Build. Mater. 127: 993–1008. https://doi.org/10.1016/j.conbuildmat.2016.01.055.
Napoli, A., and R. Realfonzo. 2020. “Compressive strength of concrete confined with fabric reinforced cementitious matrix (FRCM): Analytical models.” Composites, Part C 2: 100032. https://doi.org/10.1016/j.jcomc.2020.100032.
Napoli, A., and R. Realfonzo. 2021. “FRP confined masonry under compression: database collection and design proposals.” Compos. Struct. 276: 114490. https://doi.org/10.1016/j.compstruct.2021.114490.
Ombres, L., and S. Verre. 2018. “Masonry columns strengthened with steel fabric reinforced cementitious matrix (S-FRCM) jackets: Experimental and numerical analysis.” Measurement 127: 238–245. https://doi.org/10.1016/j.measurement.2018.05.114.
Ombres, L., A. Iorfida, and S. Verre. 2019. “Confinement of masonry columns with PBO and basalt FRCM composites.” Key Eng. Mater. 817: 392–397. https://doi.org/10.4028/www.scientific.net/KEM.817.392.
Ombres, L., and S. Verre. 2020. “Analysis of the behavior of FRCM confined clay brick masonry columns.” Fibers 8 (2): 11. https://doi.org/10.3390/fib8020011.
Ortlepp, R., A. Lorenz, and M. Curbach. 2011. “Geometry effects onto the load bearing capacity of column heads strengthened with TRC.” In Proc., Fib. Symp. 2011. Lausanne, Switzerland: fib
Realfonzo, R., and A. Napoli. 2011. “Concrete confined by FRP systems: Confinement efficiency and design strength models.” Composites, Part B 42 (4): 736–755. https://doi.org/10.1016/j.compositesb.2011.01.028.
Realfonzo, R., and A. Napoli. 2013. “Confining concrete members with FRP systems: Predictive vs design strain models.” Compos. Struct. 104: 304–319. https://doi.org/10.1016/j.compstruct.2013.04.031.
ReLUIS-DPC 2019–2021 project. n.d. Accessed September 1, 2021. https://www.reluis.it/it/progetti-dpc-reluis/dpc-reluis-2019-2021.html.
Rilem Technical Committee 250-CSM (Composites for the Sustainable strengthening of Masonry). n.d. Accessed September 1, 2021. https://www.rilem.net/groupe/250-csm-composites-for-sustainable-strengthening-of-masonry-299.
Santandrea, M., G. Quartarone, C. Carloni, and X. Gu. 2017. “Confinement of masonry columns with steel and basalt FRCM composites.” Key Eng. Mater. 747: 644–651.
Sneed, L. H., C. Carloni, G. Baietti, and G. Fraioli. 2017. “Confinement of clay masonry columns with SRG.” Key Eng. Mater. 747: 350–357. https://doi.org/10.4028/www.scientific.net/KEM.747.350.
Sneed, L. H., G. Baietti, G. Fraioli, and C. Carloni. 2019. “Compressive behavior of brick masonry columns confined with steel-reinforced grout jackets.” J. Compos. Constr. 23 (5): 04019037. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000963.
Valluzzi, M. R. 2016. “Challenges and perspectives for the protection of masonry structures in historic centers: The role of innovative materials and techniques.” RILEM Tech. Lett. 1: 45–49. https://doi.org/10.21809/rilemtechlett.2016.10.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 22, 2021
Accepted: Dec 13, 2021
Published online: Mar 2, 2022
Published in print: Jun 1, 2022
Discussion open until: Aug 2, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Annalisa Napoli, Roberto Realfonzo, Compressive Strength of Masonry Confined by FRCM Systems: Assessment of Existing Models and New Proposals, Procedia Structural Integrity, 10.1016/j.prostr.2023.01.279, 44, (2182-2189), (2023).