Tensile Performance of Textile-Reinforced Concrete after Fire Exposure: Experimental Investigation and Analytical Approach
Publication: Journal of Composites for Construction
Volume 26, Issue 1
Abstract
This paper presents investigations on the tensile behavior of several textile-reinforced concrete (TRC) material compositions after fire exposure. First, experimental investigations are presented, aiming to provide insights into the thermomechanical performance of fire-exposed TRC, and data that can be used for the development and implementation of analytical or numerical models to design fire-exposed TRC elements. The applicability of the Aveston–Cooper–Kelly (ACK) theory is assessed for ambient and increased temperatures. TRC specimens with various cases of reinforcement (carbon or glass fibers, uncoated or coated textiles, low or high fiber volume fraction) were manufactured and subjected to temperatures reaching 700°C. The residual tensile capacity of the exposed specimens is discussed, focusing on the effect of the varying reinforcement. It is verified that the use of uncoated carbon fibers is the most promising solution for maintaining the residual capacity after fire exposure. Finally, it is concluded that the ACK predictions are reliable for TRC specimens with good bond conditions and when adopting a representative thermal degradation law for the reinforcement.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study (e.g., time versus temperature recordings from all fire tests, stress–strain results from all mechanical tests, and calculations of trilinear response based on ACK model) are available from the corresponding author upon reasonable request.
Acknowledgments
This research is co-financed by Greece and the European Union (European Social Fund—ESF) through the Operational Programme «Human Resources Development, Education and Lifelong Learning» in the context of the project “Strengthening Human Resources Research Potential via Doctorate Research” (Project No. MIS-5000432), implemented by the State Scholarships Foundation (ΙΚΥ). Additionally, the authors would like to thank the Flanders Research Foundation (FWO), the Agentschap voor Innovatie en Ondernemen (VLAIO), Grant Number IWT140070, as well as the Structural Materials Laboratory of the University of Patras for partly funding this research.
Notation
The following symbols are used in this paper:
- Af
- cross-sectional area of textile;
- cf
- correction factor for ACK predictions on tensile strength and postcracking modulus;
- err
- deviation between ACK predictions and experimental data;
- Ef
- elastic modulus of the textile;
- Em
- elastic modulus of the mortar;
- E1
- deformation modulus at end of Stage I of the composite;
- E2
- deformation modulus at end of Stage II of the composite;
- E3
- deformation modulus at end of Stage III of the composite;
- Km
- calibration parameter for degradation of carbon textiles (experimentally determined);
- T
- temperature;
- Vf
- fiber volume fraction of the composite;
- Vm
- mortar volume fraction of the composite;
- ɛm
- strain at compressive failure of the mortar;
- ɛ1
- cracking strain (strain at end of Stage I) of the composite;
- ɛ2
- strain at end of Stage II of the composite;
- ɛ3
- strain at failure of the composite;
- σf
- tensile strength of the textile;
- σm
- compressive strength of the mortar;
- σmf
- tensile strength from flexure of the mortar;
- σmt
- direct tensile strength of the mortar;
- σ1
- cracking stress (stress at end of Stage I) of the composite;
- σ2
- stress at end of Stage II of the composite; and
- σ3
- ultimate stress of the composite.
References
Antons, U., J. Hegger, C. Kulas, and M. Raupach. 2012. “High-temperature tests on concrete specimens reinforced with alkali-resistant glass rovings under bending.” In Proc., 6th Int. Conf. FRP Composites in Civil Engineering, 13–15. Rome, Italy: CICE-6.
ASTM (American Society for Testing and Materials). 2014. Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM C469/C469M-14e1. West Conshohocken, PA: ASTM.
Aveston, J., G. A. Cooper, and A. Kelly. 1971. “Single and multiple fracture. The properties of fiber composites.” In Proc., Conf. National Physical Laboratories, Paper I. London: IPC Science & Technology Press.
Büttner, T., J. Orlowsky, and M. Raupach. 2007. “Fire resistance tests of textile reinforced concrete under static loading-results and future developments.” In Proc., 5th Int. RILEM Workshop on High Performance Fiber-reinforced Cement Composites, 10–13. Bagneux, France: RILEM Publications SARL.
CEB (Comitè Euro-International du Beton). 1990. Design code. EPF Lausanne, Switzerland. London: Thomas Telford Services.
CEN (European Committee for Standardization). 2016. Methods of testing cement—Part 1: Determination of strength. Brussels, Belgium: CEN.
Colombo, I., M. Colombo, A. Magri, G. Zani, and M. Di Prisco. 2011. “Textile reinforced mortar at high temperatures.” Appl. Mech. Mater. 82: 202–207. https://doi.org/10.4028/www.scientific.net/AMM.82.202.
Donnini, J., and V. Corinaldesi. 2017. “Mechanical characterization of different FRCM systems for structural reinforcement.” Constr. Build. Mater. 145: 565–575. https://doi.org/10.1016/j.conbuildmat.2017.04.051.
Donnini, J., F. De Caso y Basalo, V. Corinaldesi, G. Lancioni, and A. Nanni. 2017. “Fabric-reinforced cementitious matrix behavior at high-temperature: Experimental and numerical results.” Composites, Part B 108: 108–121. https://doi.org/10.1016/j.compositesb.2016.10.004.
Ehlig, D., F. Jesse, and M. Curbach. 2010. “High temperature tests on textile reinforced concrete (TRC) strain specimens.” In Proc., Int. RILEM Conf. on Material Science (MATSCI), 141–151. Aachen, Germany: RILEM Publications SARL.
Hatta, H., T. Aoki, Y. Kogo, and T. Yarii. 1999. “High-temperature oxidation behavior of SiC-coated carbon fiber-reinforced carbon matrix composites.” Composites, Part A 30 (4): 515–520. https://doi.org/10.1016/S1359-835X(98)00143-2.
Hegger, J., N. Will, A. Bentur, M. Curbach, F. Jesse, B. Mobasher, A. Peled, and J. Wastiels. 2006. In Composite materials—6.2 mechanical behaviour of textile reinforced concrete in textile reinforced concrete—state-of-the-art report of RILEM TC 201-TRC, edited by W. Brameshuber, 133–186. Bagneux, France: RILEM Publications SARL.
Homoro, O., X. H. Vu, and E. Ferrier. 2018. “Experimental and analytical study of the thermo-mechanical behaviour of textile-reinforced concrete (TRC) at elevated temperatures: Role of discontinuous short glass fibres.” Constr. Build. Mater. 190: 645–663. https://doi.org/10.1016/j.conbuildmat.2018.09.142.
Hulin, T., D. H. Lauridsen, K. Hodicky, J. W. Schmidt, and H. Stang. 2016. “Influence of basalt FRP mesh reinforcement on high-performance concrete thin plates at high temperatures.” J. Comp. Constr. 20 (1): 1–9. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000546.
ISO (International Organization for Standardization). 2012. Fire-resistance tests: Elements of building construction. General requirements. ISO 834-1:1999/Amd. 1: 2012. Geneva, Switzerland: ISO.
Kapsalis, P., M. El Kadi, J. Vervloet, M. De Munck, J. Wastiels, T. Triantafillou, and T. Tysmans. 2019. “Thermomechanical behavior of textile reinforced cementitious composites subjected to fire.” Appl. Sci. 9 (4): 137–152. https://doi.org/10.3390/app9040747.
Khoury, G. A. 1992. “Compressive strength of concrete at high temperatures: A reassessment.” Mag. Conc. 44 (161): 291–309. https://doi.org/10.1680/macr.1992.44.161.291.
Kude, Y., and Y. Sohda. 1997. “Thermal management of carbon-carbon composites by functionally graded fiber arrangement technique.” Func. Grad. Mater. 1996: 239–244.
Kulas, C., J. Hegger, M. Raupach, and U. Antons. 2011. “High-temperature behavior of textile reinforced concrete.” In Proc., Int. RILEM Conf. on Advances in Construction Materials Through Science and Engineering, 827–834. Hong Kong, China: RILEM Publications SARL.
Li, T., Y. Zhang, and J.-G. Dai. 2017. “Flexural behavior and microstructure of hybrid basalt textile and steel fiber-reinforced alkali-activated slag panels exposed to elevated temperatures.” Constr. Build. Mater. 152: 651–660. https://doi.org/10.1016/j.conbuildmat.2017.07.059.
Liu, S., P. Rawat, Z. Chen, S. Guo, C. Shi, and D. Zhu. 2020. “Pullout behaviors of single yarn and textile in cement matrix at elevated temperatures with varying loading speeds.” Composites Part B 199: 108251. https://doi.org/10.1016/j.compositesb.2020.108251.
Long, G.-T. 1996. “Influence of boron treatment on oxidation of carbon fiber in air.” J. Appl. Polym. Sci. 59: 915–921. https://doi.org/10.1002/(SICI)1097-4628(19960207)59:6%3C915::AID-APP2%3E3.0.CO;2-S.
Messori, M., A. Nobili, C. Signorini, and A. Sola. 2019. “Effect of high temperature exposure on epoxy-coated glass textile reinforced mortar (GTRM) composites.” Constr. Build. Mater. 212: 765–774. https://doi.org/10.1016/j.conbuildmat.2019.04.026.
Nguyen, T. H., X. H. Vu, A. Si Larbi, and E. Ferrier. 2016. “Experimental study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC).” Constr. Build. Mater. 125: 253–270. https://doi.org/10.1016/j.conbuildmat.2016.08.026.
Papakonstantinou, C. G., P. Balaguru, and R. E. Lyon. 2001. “Comparative study of high temperature composites.” Composites, Part B 32 (8): 637–649. https://doi.org/10.1016/S1359-8368(01)00042-7.
Peled, A., Z. Cohen, S. Janetzko, and T. Gries. 2011. “Hybrid fabrics as cement matrix reinforcement.” In Proc., Textilbeton in Theorie und Praxis, 6th Colloquium on Textile Reinforced Structures, 1–14. Dresden, Germany: Technical University of Dresden.
Rambo, D. A. S., F. de Andrade Silva, R. D. Toledo Filho, and O. da Fonseca Martins Gomes. 2015. “Effect of elevated temperatures on the mechanical behavior of basalt textile reinforced refractory concrete.” Mater. Des. 65: 24–33. https://doi.org/10.1016/j.matdes.2014.08.060.
Rambo, D. A. S., F. De Andrade Silva, R. D. Toledo Filho, N. Ukrainczyk, and E. Koenders. 2016. “Tensile strength of a calcium-aluminate cementitious composite reinforced with basalt textile in a high-temperature environment.” Cem. Concr. Compos. 70: 183–193. https://doi.org/10.1016/j.cemconcomp.2016.04.006.
Saidi, M., X. H. Vu, and E. Ferrier. 2020. “Experimental and analytical analysis of the effect of water content on the thermomechanical behaviour of glass textile reinforced concrete at elevated temperatures.” Cem. Concr. Compos. 112: 103690. https://doi.org/10.1016/j.cemconcomp.2020.103690.
Sauder, C., J. Lamon, and R. Pailler. 2002. “Thermomechanical properties of carbon fibres at high temperatures (up to 2000°C).” Compos. Sci. Technol. 62 (4): 499–504. https://doi.org/10.1016/S0266-3538(01)00140-3.
Shen, L., S. Xu, and J. Wang. 2015. “Mechanical behaviour of TRC thin-plates exposed to high temperature: Experimental study.” Mag. Concr. Res. 67 (21): 1135–1149. https://doi.org/10.1680/macr.14.00394.
Silva, F. D. A., M. Butler, S. Hempel, R. D. Toledo Filho, and V. Mechtcherine. 2014. “Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete.” Cem. Con. Comp. 48: 26–34. https://doi.org/10.1016/j.cemconcomp.2014.01.007.
Sumida, A., T. Fujisaki, K. Watanabe, and T. Kato. 2001. “Heat resistance of continuous fiber-reinforced plastic rods.” In Vol. 1. of Proc., 5th Int. Conf. Fibre-Reinforced Plastics for Reinforced Concrete Structures FRPRCS-5, 557–565. Cambridge, UK: Thomas Telford Publishing.
Tlaiji, T., X. H. Vu, E. Ferrier, and A. Si Larbi. 2018. “Thermomechanical behaviour and residual properties of textile reinforced concrete (TRC) subjected to elevated and high temperature loading: Experimental and comparative study.” Composites, Part B 144: 99–110. https://doi.org/10.1016/j.compositesb.2018.02.022.
Tlaiji, T., X. H. Vu, M. Michel, E. Ferrier, and A. S. Larbi. 2020. “Physical, chemical and thermomechanical characterisation of glass textile-reinforced concretes (TRC): Effect of elevated temperature and of cementitious matrix nature on properties of TRC.” Mater. Today. Commun. 25: 101580. https://doi.org/10.1016/j.mtcomm.2020.101580.
Tran, M. T., X. H. Vu, and E. Ferrier. 2018. “Experimental and analytical analysis of the effect of fibre treatment on the thermomechanical behaviour of continuous carbon textile subjected to simultaneous elevated temperature and uniaxial tensile loadings.” Constr. Build. Mater. 183: 32–45. https://doi.org/10.1016/j.conbuildmat.2018.06.114.
Tran, M. T., X. H. Vu, and E. Ferrier. 2019. “Mesoscale experimental investigation of thermomechanical behaviour of the carbon textile reinforced refractory concrete under simultaneous mechanical loading and elevated temperature.” Constr. Build. Mater. 217: 156–171. https://doi.org/10.1016/j.conbuildmat.2019.05.067.
Tran, M. T., X. H. Vu, and E. Ferrier. 2020. “Mesoscale numerical modeling and characterization of the effect of reinforcement textile on the elevated temperature and tensile behaviour of carbon textile-reinforced concrete composite.” Fire Saf. J. 116: 103186. https://doi.org/10.1016/j.firesaf.2020.103186.
Triantafillou, T. C. 2016. Textile fibre composites in civil engineering. Sawston, UK: Woodhead Publishing.
Truong, G. T., S. H. Park, and K. K. Choi. 2019. “Tensile behaviors of lap-spliced carbon fiber-textile.” Materials 12 (1512): 1–29.
Xu, S., L. Shen, and J. Wang. 2016. “The high-temperature resistance performance of TRC thin-plates with different cementitious materials: Experimental study.” Constr. Build. Mater. 115: 506–519. https://doi.org/10.1016/j.conbuildmat.2016.04.070.
Xu, S. L., L. H. Shen, J. Y. Wang, and Y. Fu. 2014. “High temperature mechanical performance and micro interfacial adhesive failure of textile reinforced concrete thin-plate.” J. Zhejiang Univ. Sci. A 15 (1): 31–38.
Younes, A., A. Seidel, T. Engler, C. Cherif, and D. Ehlig. 2013. “Mechanical behaviour of carbon and glass filament yarns under high temperatures for composite applications.” J. Text. Inst. 104 (3): 251–259. https://doi.org/10.1080/00405000.2012.717752.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 11, 2020
Accepted: Aug 2, 2021
Published online: Dec 9, 2021
Published in print: Feb 1, 2022
Discussion open until: May 9, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- JinJing Liao, Jun-Jie Zeng, Xin-Chao Lin, Yan Zhuge, Shao-Hua He, Punching Shear Behavior of FRP Grid-Reinforced Ultra-High Performance Concrete Slabs, Journal of Composites for Construction, 10.1061/JCCOF2.CCENG-4148, 27, 4, (2023).
- L. Estevan, B. Torres, F.B. Varona, F.J. Baeza, S. Ivorra, Shear strengthening of masonry walls with Textile Reinforced Mortars (TRM) under high temperature exposure, Journal of Building Engineering, 10.1016/j.jobe.2022.105511, 63, (105511), (2023).
- Prashant Rawat, Sai Liu, Shuaicheng Guo, Md Zillur Rahman, Ting Yang, Xiayang Bai, Yiming Yao, Barzin Mobasher, Deju Zhu, A state-of-the-art review on mechanical performance characterization and modelling of high-performance textile reinforced concretes, Construction and Building Materials, 10.1016/j.conbuildmat.2022.128521, 347, (128521), (2022).