Abstract
This paper focuses on the conceptual use of a fiber-reinforced polymer (FRP) wind turbine blade that is repurposed for a second life as an electrical transmission pole. Thousands of tons of fiber-reinforced polymer composite wind turbine blades are currently coming out of service globally and are being landfilled or incinerated. These are not environmentally preferable disposal methods. This paper presents a detailed structural analysis of a Clipper C96, 46.7-m-long turbine blade used as an electrical pole. The analytical procedure needed to characterize the wind turbine blade for repurposing includes determining the external and internal geometry of the blade, identifying the types of materials and laminates used throughout the blade, and calculating effective moduli and section properties for structural analysis. Code-specified load combinations are then used to analyze the transmission line BladePole to determine internal forces and deformations and stresses. Maximum stresses were compared to those obtained from theoretical models. The results indicate that wind turbine blades can safely be used as electrical transmission poles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support for this research was provided by the National Science Foundation (NSF) under grants 1701413 and 1701694; by InvestNI/Department for the Economy (DfE) under grant 16/US/3334 and by Science Foundation Ireland (SFI) under grant USI-116 as part of the US-Ireland Tripartite research program.
References
Alshannaq, A., D. Scott, L. Bank, M. Bermek, and R. Gentry. 2019. “Structural re-use of de-commissioned wind turbine blades in civil engineering applications.” In Proc., 34th Technical Conf. of the American Society for Composites, 14. Lancaster, PA: DEStech. https://doi.org/10.12783/asc34/31317.
ASTM. 2018. Standard test method for ignition loss of cured reinforced resins. ASTM D2584. West Conshohocken, PA: ASTM.
Autodesk. 2016. “Autodesk Helius composite. V. 2016.” Accessed January 1, 2020. https://www.autodesk.com/products/helius-composite/overview.
Autodesk. 2019. “Autodesk AutoCAD. V. 2019.” Accessed January 1, 2020. https://www.autodesk.com/products/autocad/overview.
Bank, L., et al. 2018a. “Re-wind design atlas.” Accessed August 1, 2020. https://www.re-wind.info/product/2020/8/5/re-wind-releases-its-design-atlas-creative-commons-license-cc-by-nc-sa-40.
Bank, L. C. 2006. Composites for construction: Structural design with FRP materials. Hoboken, NJ: Wiley.
Bank, L. C., F. R. Arias, A. Yazdanbakhsh, T. R. Gentry, T. Al-Haddad, J.-F. Chen, and R. Morrow. 2018b. “Concepts for reusing composite materials from decommissioned wind turbine blades in affordable housing.” Recycling 3 (1): 3. https://doi.org/10.3390/recycling3010003.
Brøndsted, P., H. Lilholt, and A. Lystrup. 2005. “Composite materials for wind power turbine blades.” Annu. Rev. Mater. Res. 35 (1): 505–538. https://doi.org/10.1146/annurev.matsci.35.100303.110641.
Gentry, R., T. Al-Haddad, L. C. Bank, F. R. Arias, A. Nagle, and P. Leahy. 2020. “Structural analysis of a roof extracted from a wind turbine blade.” J. Arch. Eng. 26 (4): 04020040. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000440.
Gentry, R., L. C. Bank, J. F. Chen, F. Arias, and T. Al-Haddad. 2018. “Adaptive reuse of FRP composite wind turbine blades for civil infrastructure construction.” In Proc., 9th Int. Conf. on Fiber Reinforced Polymer Composites in Civil Engineering, 692–698. Paris: IIFC. Accessed April 15, 2021. http://www.iifc.org/wp-content/uploads/2010/06/CICE2018_Proceeding_Part1.pdf.
Hayman, B., J. Wedel-Heinen, and P. Brøndsted. 2008. “Materials challenges in present and future wind energy.” MRS Bull. 33 (4): 343–353. https://doi.org/10.1557/mrs2008.70.
IEEE (Institute of Electrical and Electronics Engineers). 2017. National electrical safety code. New York: IEEE.
IES (Integrated Engineering Software). 2019. “IES visual analysis. V. 2019.” Accessed January 1, 2020. https://www.iesweb.com/va/index.html.
Katnam, K. B., A. J. Comer, D. Roy, L. F. M. da Silva, and T. M. Young. 2015. “Composite repair in wind turbine blades: An overview.” J. Adhes. 91 (1–2): 113–139. https://doi.org/10.1080/00218464.2014.900449.
Kollar, L. P., and G. S. Springer. 2003. Mechanics of composite structures. New York: Cambridge University Press.
Librescu, L., and O. Song. 2005. Thin-walled composite beams: Theory and application. Dordrecht, Netherlands: Springer.
Liu, P., and C. Y. Barlow. 2017. “Wind turbine blade waste in 2050.” Waste Manage. (Oxford) 62: 229–240. https://doi.org/10.1016/j.wasman.2017.02.007.
Matweb. 2020. “Technical data of E-glass fiber.” Accessed January 1, 2020. http://www.matweb.com/search/DataSheet.aspx?MatGUID=d9c18047c49147a2a7c0b0bb1743e812&ckck=1.
McGuire, W., R. H. Gallagher, and R. D. Ziemian. 2000. Matrix structural analysis. New York: Wiley.
Metyx Composites. 2020. “Technical datasheet of RIMR 135.” Accessed January 1, 2020. https://www.metyx.com/wp-content/uploads/PDF_Files/Hexion/TDS/TDS%20RIMH%20137.pdf.
Nijssen, R., G. de Winkel, J. Peeringa, and R. Date. 2007. “WMC5MW laminate lay-out of reference blade for WP 3.” Upwind Integrated Wind Turbine Design. Accessed January 1, 2020. https://www.yumpu.com/en/document/view/37697935/wmc5mw-laminate-lay-out-of-reference-blade-for-wp-3.
Nijssen, R. P. L. 2006. Fatigue life prediction and strength degradation of wind turbine rotor blade composites. Rep. No. SAND2006-7810P. Albuquerque, NM: Sandia National Laboratories.
Oden, J. T., and E. A. Ripperger. 1981. Mechanics of elastic structures. Washington, DC: Hemisphere Publishing.
Post, N. L. 2005. “Modeling the residual strength distribution of structural GFRP composite materials subjected to constant and variable amplitude tension-tension fatigue loading.” Master’s thesis, Virginia Tech. Accessed February 24, 2021. https://vtechworks.lib.vt.edu/handle/10919/36196.
Post, N. L., S. W. Case, and J. J. Lesko. 2008. “Modeling the variable amplitude fatigue of composite materials: A review and evaluation of the state of the art for spectrum loading.” Int. J. Fatigue 30 (12): 2064–2086. https://doi.org/10.1016/j.ijfatigue.2008.07.002.
Power Line Systems. 2021. “Power transmission lines framing and configurations.” Accessed February 24, 2021. http://www.powline.com/files/pls_pole/rus/RUSModels.html#StructureSchedule.
Re-Wind Network. 2021. “The Re-Wind network, repurposing wind blades.” Accessed April 15, 2021. www.re-wind.info.
RS. 2021. “RS composite utility poles.” Accessed February 24, 2021. https://www.rspoles.com/.
Suhail, R., J.-F. Chen, T. R. Gentry, B. Tasistro-Hart, Y. Xue, and L. C. Bank. 2019. “Analysis and design of a pedestrian bridge with decommissioned FRP windblades and concrete.” In Proc., 14th Int. Sym. on Fiber-Reinforced Polymer Reinforcement of Concrete Structures, 1–5. Belfast, UK: IIFC. Accessed April 15, 2021. www.iifc.org/wp-content/uploads/2019/09/FRPRCS14.zip.
Task Committee on Fiber-Reinforced Polymer Products for Overhead Utility Line Structures. 2019. MOP 104-Recommended practice for fiber-reinforced polymer products for overhead utility line structures. Reston, VA: ASCE.
Wong, C. J., and M. D. Miller, eds. 2009. MOP 74-Guidelines for electrical transmission line structural loading. Reston, VA: ASCE.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 22, 2020
Accepted: Mar 13, 2021
Published online: Apr 28, 2021
Published in print: Aug 1, 2021
Discussion open until: Sep 28, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.