Flexural Tests of Full-Scale Cast Iron Girders Reinforced with CFRP Plates to Investigate the Benefits of the Strengthening
Publication: Journal of Composites for Construction
Volume 24, Issue 6
Abstract
This paper presents the results of the flexural testing to destruction of two cast iron girders preserved during the demolition of a railway bridge in Scotland. The 151-year-old girders were reinforced with ultrahigh modulus carbon fiber polymer composite (CFRP) plates in 2004. The CFRP plates on one girder were damaged during the demolition and were rendered completely ineffective before testing. The girders were 9 m long and were be tested in four-point bending to failure which gave a unique opportunity to compare the behavior of unreinforced and reinforced cast iron at full-scale. Fragments of cast iron and CFRP that remained after the flexural testing were be used to prepare test specimens and were used to determine material properties. The tests demonstrated the considerable benefits of CFRP strengthening (an increase in load-bearing capacity of 43.9% and an increase in stiffness of 31%) and confirmed that the CFRP was fully bonded to the cast iron until close to the point of failure. The test results have been compared with theoretical and original design predictions that showed that the theoretical predictions were remarkably accurate and the design predictions were conservative as is required for a safe design. This paper includes details of the girders, the test rig, and test procedure, and presents in detail the test results that include the failure mechanisms and will discuss the benefits obtained from the CFRP strengthening of cast iron girders.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author is grateful to Network Rail for funding the experimental work reported in this paper. Doosan Babcock Ltd was responsible for the testing and did an excellent job. Craig Millar, in particular, ran the tests in a very professional manner and was very helpful throughout. Some of the photographs in this report were provided by him. TGP has been generous by providing details of the original CFRP strengthening scheme.
References
BSI (British Standards Institution). 2019. Metallic materials. tensile testing. Method of test at room temperature. London: BSI.
Cadei, J. M., T. J. Stratford, L. C. Hollaway, and W. G. Duckett, eds. 2004. Strengthening metallic structures using externally bonded fibre reinforced polymers. CIRIA Design Guide C595. London: Construction Industry Research and Information Association.
Canning, L., N. Farmer, S. Luke, and I. Smith. 2006. “Recent developments in strengthening technology and the strengthening/reconstruction decision.” In Railway Bridges Today and Tomorrow, Network Rail, Marriott Hotel City Centre, 107–115. Bristol, UK: Network Rail.
CNR (Consiglio Nazionale delle Richerche). 2007. Guidelines for the design and construction of externally bonded FRP systems for strengthening existing structures. Metallic structures. Rep. No. CNR-DT 202/2005. Rome: CNR.
Concrete Society. 2004. Design guidance for strengthening concrete structures using fibre composite materials. 2nd ed. Technical Rep. No. 55. Crowthorne, UK: Concrete Society.
Farmer, N., and I. Smith. 2001. “King street railway bridge—Strengthening of cast iron girders with FRP composites.” In Proc., 9th Int. Conf. on Structural Faults and Repairs, Edinburgh, UK: Engineering Technics Press.
Highways Agency. 2001. DMRB volume 3 Section 4 Part 3 (BD 21/01) highway structures: Inspection and maintenance. Assessment of highway bridges and structures (includes correction dated August 2001). London: Highways Agency.
Luke, S. 2001. “The use of carbon fibre plates for the strengthening of two metallic bridges of an historic nature in the UK.” In Proc., 8th Int. Conf. on Fibre-Reinforced Polymer Composites in Civil Engineering, edited by J. G. Teng, 975–983. Oxford, UK: Elsevier.
Mertz, D. R., J. W. Gillespie, M. J. Chajes, and S. A. Sabol. 2001. The rehabilitation of steel bridge girders using advanced composite materials. IDEA program final report, contract number NCHRP-98-ID051. Washington, DC: Transportation research board.
Moy, S., and D. Lillistone. 2006. “Strengthening cast iron using FRP composites.” Proc. Inst. Civ. Eng. Struct. Build. 159 (6): 309–318. https://doi.org/10.1680/stbu.2006.159.6.309.
Moy, S. S. J. 2007. “The strengthening of cast iron and wrought iron structures using CFRP—The United Kingdom experience.” In SEI Congress, edited by J. W. Wallace, 1–16. Reston, VA: ASCE.
Moy, S. S. J., and A. G. Bloodworth. 2007. “Strengthening a steel bridge with CFRP composites.” Proc. Inst. Civ. Eng. Struct. Build. 160 (2): 81–93. https://doi.org/10.1680/stbu.2007.160.2.81.
Schnerch, D., M. Dawood, and S. Rizkalla. 2007. Design guidelines for the use of HM strips: Strengthening of steel concrete composite bridges with high modulus carbon fiber reinforced polymer (CFRP) strips. Technical Rep. No. IS-06-02. Raleigh, NC: North Carolina State Univ., Constructed Facilities Lab.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Nov 23, 2019
Accepted: Jul 14, 2020
Published online: Sep 18, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 18, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.