Reconsideration of the Environmental Reduction Factor CE for GFRP Reinforcing Bars in Concrete Structures
Publication: Journal of Composites for Construction
Volume 24, Issue 4
Abstract
Design guides for fibre-reinforced polymer-reinforced concrete (FRP-RC) require that the design tensile strength of FRP bars be determined by multiplying the guaranteed tensile strength by an environmental reduction factor (CE), to account for the long-term effects of environmental exposure. The recommended CE values in the American Concrete Institute (ACI) design guide are based on a consensus of the opinion of ACI 440 Committee members and believed to be conservative. The ACI design guide notes the expectation that, with continued research, CE values will become more reflective of observed environmental performance. In this study, CE values were estimated for a compiled database of glass FRP (GFRP) bars based on short-term results from accelerated aging tests. The CE values were calculated with a prediction model considering the effects of seasonal temperature fluctuations, service year, and relative humidity (RH) of exposure. The analysis shows that the calculated values of CE depend to a certain extent on the mean annual temperatures and RH. In all cases, however, the calculated values were higher than those recommended in the ACI design guide. The authors recommend a CE value of 0.85 for an assumed service life of 75–100 years to be applied to the guaranteed tensile strength as the basis for determining the design tensile strength. This value is recommended for GFRP bars complying with ASTM Standards, whether exposed or unexposed to earth and weather in cold temperatures and climates encountered in most regions of the world.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American Concrete Institute). 2003. Guide for the design and construction of structural concrete reinforced with FRP bars.ACI 440.1R-03. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2015. Guide for the design and construction of structural concrete reinforced with FRP bars. ACI 440.1R-15. Farmington Hills, MI: ACI.
Ali, A. H., B. Benmokrane, H. M. Mohamed, A. Manalo, and A. El-Safty. 2018. “Statistical analysis and theoretical predictions of the tensile-strength retention of glass fiber-reinforced polymer bars based on resin type.” J. Compos. Mater. 52 (21): 2929–2948. https://doi.org/10.1177/0021998318755866.
Al-Salloum, Y. A., S. El-Gamal, T. H. Almusallam, S. H. Alsayed, and M. Aqel. 2013. “Effect of harsh environmental conditions on the tensile properties of GFRP bars.” Composites B 45 (1): 835–844. https://doi.org/10.1016/j.compositesb.2012.05.004.
Alsayed, S., Y. Al-Salloum, T. Almusallam, S. El-Gamal, and M. Aqel. 2012. “Performance of glass fiber-reinforced polymer bars under elevated temperatures.” Composites B 43 (5): 2265–2271. https://doi.org/10.1016/j.compositesb.2012.01.034.
Arczewska, P. 2018. “Deterioration of glass fiber-reinforced polymer (GFRP) bars in concrete environment.” In Proc., 10th Int. Conf. on Short and Medium Span Bridges (SMSB 2018), edited by K. Sennah, 157-1:11. Quebec, Canada: CSCE.
ASTM. 2017. Standard specification for solid round glass fiber-reinforced polymer bars for concrete reinforcement. ASTM D7957/D7957M-17. West Conshohocken, PA: ASTM.
Bank, L. C., T. R. Gentry, B. P. Thompson, and J. S. Russell. 2003. “A model specification for FRP composites for civil engineering structures.” Constr. Build. Mater. 17 (6–7): 405–437. https://doi.org/10.1016/S0950-0618(03)00041-2.
Benmokrane, B., A. Manalo, J. C. Bouhet, K. Mohamed, and M. Robert. 2017. “Effects of diameter on the durability of GFRP bars conditioned in alkaline solution.” J. Compos. Constr. 21 (5): 04017040. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000814.
Benmokrane, B., H. M. Mohamed, and A. H. Ali. 2018a. “Service-life-prediction and field application of glass fiber-reinforced polymer tubular and solid bolts based on laboratory physical and mechanical assessment.” J. Compos. Mater. 52 (24): 3309–3323. https://doi.org/10.1177/0021998318764806.
Benmokrane, B., C. Nazair, M.-A. Loranger, and A. Manalo. 2018b. “Field durability study of vinyl-ester-based GFRP rebars in concrete bridge barriers.” J. Bridge Eng. 23 (12): 04018094. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001315.
Chen, Y., J. F. Davalos, and I. Ray. 2006. “Durability prediction for GFRP reinforcing bars using short-term data of accelerated aging tests.” J. Compos. Constr. 10 (4): 279–286. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:4(279).
Chen, Y., J. F. Davalos, I. Ray, and H-Y. Kim. 2007. “Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures.” J. Compos. Struc. 78 (2007): 101–111.
Davalos, J. F., Y. Chen, and I. Ray. 2012. “Long-term durability prediction models for GFRP bars in concrete environment.” J. Compos. Mater. 46 (16): 1899–1914. https://doi.org/10.1177/0021998311427777.
Dejke, V. 1999. Durability of fibre reinforced polymers (FRP) as reinforcement concrete structures. Publication No. P-98:18. Göteborg, Sweden: Chalmers Univ. of Technology.
Dejke, V., and R. Tepfers. 2001. “Durability and service life time prediction of GFRP for concrete reinforcement.” In Vol. 2 of Proc., 5th Int. Symp. on Fiber-Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-5), 505–513. Cambridge, UK: Thomas Telford.
Gooranorimi, O., and A. Nanni. 2017. “GFRP reinforcement in concrete after 15 years of service.” J. Comp. Constr. 21 (5): 04017024. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000806.
Huang, J., and R. Aboutaha. 2010. “Environmental reduction factors for GFRP bars used as concrete reinforcement: New scientific approach.” J. Compos. Constr. 14 (5): 479–486. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000122.
Katsuki, F., and T. Uomoto. 1995. “Prediction of deterioration of FRP rods due to alkali attack.” In Proc., 2nd Int. Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures, edited by L. Taerwe, 108–115. London: Spon.
Micelli, F., and A. Nanni. 2004. “Durability of FRP rods for concrete structures.” Constr. Build. Mater. 18 (7): 491–503. https://doi.org/10.1016/j.conbuildmat.2004.04.012.
Mufti, A. A., N. Banthia, B. Benmokrane, M. Boulfiza, and J. P. Newhook. 2007. “Durability of GFRP composite rods.” ACI Conc. Int. Mag. 29 (2): 37–42.
Nelson, W. B. 2009. Accelerated testing: Statistical models, test plans, and data analysis. Hoboken, NJ: Wiley.
Nkurunziza, G., B. Benmokrane, A. S. Debaiky, and R. Masmoudi. 2005. “Effect of sustained load and environment on long-term tensile properties of glass fiber-reinforced polymer reinforcing bars.” ACI Struct. J. 102 (4): 615–621.
Robert, M., and B. Benmokrane. 2013. “Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars.” Constr. Build. Mater. 38: 274–284. https://doi.org/10.1016/j.conbuildmat.2012.08.021.
Robert, M., P. Cousin, and B. Benmokrane. 2009. “Durability of GFRP reinforcing bars embedded in moist concrete.” J. Compos. Constr. 13 (2): 66–73. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:2(66).
Sawpan, M. A., A. A. Mamunb, and P. G. Holdsworth. 2014. “Long term durability of pultruded polymer composite rebar in concrete environment.” Mater. Des. 57: 616–624. https://doi.org/10.1016/j.matdes.2014.01.049.
Sen, R., G. Mullins, and T. Salem. 2002. “Durability of E-glass/vinylester reinforcement in alkaline solution.” ACI Struct. J. 99 (3): 369–375.
Tannous, F. E., and H. Saadatmanesh. 1998. “Environmental effects on the mechanical properties of E-glass FRP rebars.” ACI Mater. J. 95 (2): 87–100.
Wang, Z., X.-L. Zhao, G. Xian, G. Wu, R. K. S. Raman, S. Al-Saadi, and A. Haque. 2017. “Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment.” Constr. Build. Mater. 139: 467–489. https://doi.org/10.1016/j.conbuildmat.2017.02.038.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 24 • Issue 4 • August 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Sep 12, 2019
Accepted: Feb 6, 2020
Published online: May 11, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 11, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.