Effect of Freeze–Thaw Cycles on FRP-Concrete Bond Strength in EBR and EBROG Systems
Publication: Journal of Composites for Construction
Volume 24, Issue 3
Abstract
The effects of freeze–thaw cycles on the fiber-reinforced polymer (FRP)-to-concrete bond strength were investigated using the particle image velocimetry (PIV) technique. For this purpose, 18 specimens were prepared, including 12 specimens strengthened with carbon FRP (CFRP) strips as well as six control specimens subjected to 200 and 500 freeze–thaw cycles. The specimens were strengthened via externally bonded reinforcement (EBR) and externally bonded reinforcement on grooves (EBROG) methods. The results of PIV measurements revealed that, compared with the specimens strengthened via the EBR method, the EBROG-strengthened specimens exhibited considerably enhanced bond performance. When subjected to 200 and 500 freeze–thaw cycles, the EBR-strengthened specimens experienced a 3% and 9% decrease in their bond strength, respectively; the EBROG-strengthened specimens experienced no decrease in bond strength and increases in the range of 7%–19% when subjected to 200 and 500 cycles, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adrian, R. J. 1991. “Particle-imaging techniques for experimental fluid mechanics.” Annu. Rev. Fluid Mech. 23 (1): 261–304.
Al-Mahaidi, R., and R. Kalfat. 2011. “Investigation into CFRP laminate anchorage systems utilising bi-directional fabric wrap.” Compos. Struct. 93 (4): 1265–1274.
Al-Mahmoud, F., J.-M. Mechling, and M. Shaban. 2014. “Bond strength of different strengthening systems—Concrete elements under freeze–thaw cycles and salt water immersion exposure.” Constr. Build. Mater. 70: 399–409.
ASTM. 2000. Standard test method for tensile properties of polymer matrix composite materials. ASTM D3039/D3039M. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for resistance of concrete to rapid freezing and thawing. ASTM C666/C666M. West Conshohocken, PA: ASTM.
Bellakehal, H., A. Zaidi, R. Masmoudi, and M. Bouhicha. 2013. “Combined effect of sustained load and freeze–thaw cycles on one-way concrete slabs reinforced with glass fibre–reinforced polymer.” Can. J. Civil Eng. 40 (11): 1060–1067.
Bisby, L. A., and M. Green. 2002. “Resistance to freezing and thawing of fiber-reinforced polymer concrete bond.” ACI Struct. J. 99 (2): 215–223.
Biscaia, H. C., M. A. G. Silva, and C. Chastre. 2015. “Factors influencing the performance of externally bonded reinforcement systems of GFRP-to-concrete interfaces.” Mater. Struct. 48 (9): 2961–2981.
Biscaia, H. C., M. A. G. Silva, and C. Chastre. 2016. “Influence of external compressive stresses on the performance of GFRP-to-concrete interfaces subjected to aggressive environments: An experimental analysis.” J. Compos. Constr. 20 (2): 04015044. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000600.
Brosens, K. 2001. “Anchorage of externally bonded steel plates and CFRP laminates for the strengthening of concrete elements.” Ph.D. thesis, Dept. of Civil Engineering, Katholieke Univ. Leuven, Leuven, Belgium.
Brosens, K., and D. Van Gemert. 1997. “Anchoring stresses between concrete and carbon fiber-reinforced laminates. Non-metallic (FRP) reinforcement for concrete structures.” Jpn. Concr. Inst. 1: 271–278.
Cho, K., S. Y. Park, S. T. Kim, J.-R. Cho, and B.-S. Kim. 2013. “Freeze-thaw effect on coarse sand coated interface between FRP and concrete.” Engineering 5 (10): 807–815.
Cromwell, J. R., K. A. Harries, and B. M. Shahrooz. 2011. “Environmental durability of externally bonded FRP materials intended for repair of concrete structures.” Constr. Build. Mater. 25 (5): 2528–2539.
Ghiassi, B., G. Marcari, D. V. Oliveira, and P. B. Lourenço. 2013. “Water degrading effects on the bond behavior in FRP-strengthened Masonry.” Composites Part B 54: 11–19.
Ghorbani, M., D. Mostofinejad, and A. Hosseini. 2017. “Experimental investigation into bond behavior of FRP-to-concrete under mixed-mode I/II loading.” Constr. Build. Mater. 132: 303–312.
Green, M. F., A. S. J. Dent, and L. A. Bisby. 2003. “Effect of freeze–thaw cycling on the behaviour of reinforced concrete beams strengthened in flexure with fibre reinforced polymer sheets.” Can. J. Civil Eng. 30 (6): 1081–1088.
Hosseini, A., and D. Mostofinejad. 2013. “Experimental investigation into bond behavior of CFRP sheets attached to concrete using EBR and EBROG techniques.” Composites Part B 51: 130–139.
Hosseini, A., and D. Mostofinejad. 2014. “Effective bond length of FRP-to-concrete adhesively-bonded joints: Experimental evaluation of existing models.” Int. J. Adhes. Adhes. 48: 150–158.
Hosseini, A., D. Mostofinejad, and M. Hajialilue-Bonab. 2014. “Displacement and strain field measurement in steel and RC beams using particle image velocimetry.” J. Eng. Mech. 140 (11): 04014086. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000805.
Mohammadi, M., M. Barghian, D. Mostofinejad, and A. Rafieyan. 2019. “Alkali and temperature long-term effect on the bond strength of fiber reinforced polymer-to concrete interface.” J. Compos. Mater. 53 (2): 2777–2924.
Mohammadi, M., D. Mostofinejad, and M. Barghian. 2017. “Effects of surface preparation method on FRP-concrete bond strength under alkaline conditions.” J. Compos. Constr. 21 (4): 04017010. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000786.
Mostofinejad, D., and M. J. Hajirasouliha. 2013. “Effect of concrete strength and groove dimension on performance of grooving method to postpone debonding of FRP sheets in strengthened concrete beams.” Iran. J. Sci. Technol. Trans. B Eng. 37 (C2): 219–232.
Mostofinejad, D., and A. T. Kashani. 2013. “Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams.” Composites Part B 45 (1): 1704–1713.
Mostofinejad, D., and K. Khozaei. 2015. “Effect of GM patterns on ductility and debonding control of FRP sheets in RC strengthened beams.” Constr. Build. Mater 93: 110–120.
Mostofinejad, D., and E. Mahmoudabadi. 2010. “Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams.” J. Compos. Constr. 14 (6): 804–811. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000117.
Mostofinejad, D., and A. Moghaddas. 2014. “Bond efficiency of EBR and EBROG methods in different flexural failure mechanisms of FRP strengthened RC beams.” Constr. Build. Mater. 54: 605–614.
Mostofinejad, D., and S. M. Shameli. 2013. “Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams.” Constr. Build. Mater. 38: 751–758.
Mostofinejad, D., S. A. Hosseini, and S. B. Razavi. 2016. “Influence of different bonding and wrapping techniques on performance of beams strengthened in shear using CFRP reinforcement.” Constr. Build. Mater 116: 310–320.
Salimian, M. S., and D. Mostofinejad. 2019. “Experimental evaluation of CFRP-concrete bond behavior under high loading rates using particle image velocimetry method.” J. Compos. Constr 23 (3): 04019010. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000933.
Silva, M. A. G., and H. Biscaia. 2008. “Degradation of bond between FRP and RC beams.” Compos. Struct. 85: 164–174.
Slomiski, C., M. Niedostatkiewicz, and J. Tejchman. 2007. “Application of particle image velocimetry (PIV) for deformation measurement during granular silo flow.” Powder Technol. 173 (1): 1–18.
Subramaniam, K. V., M. Ali-Ahmad, and M. Ghosn. 2008. “Freeze–thaw degradation of FRP–concrete interface: Impact on cohesive fracture response.” Eng. Fract. Mech. 75 (13): 3924–3940.
Sun, W., R. Mu, X. Luo, and C. Miao. 2002. “Effect of chloride salt, freeze–thaw cycling and externally applied load on the performance of the concrete.” Cem. Concr. Res. 32 (12): 1859–1864.
White, D. J., and W. Take. 2002. Particle image velocimetry (PIV) software for use in geotechnical testing. Technical Rep. Cambridge, UK: Cambridge Univ., Engineering Dept.
White, D. J., W. A. Take, and M. D. Bolton. 2003. “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” Géotechnique 53 (7): 619–631.
Zhou, Y., Z. Fan, J. Du, L. Sui, and F. Xing. 2015. “Bond behavior of FRP-to-concrete interface under sulfate attack: An experimental study and modeling of bond degradation.” Constr. Build. Mater 85: 9–21.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Oct 22, 2018
Accepted: Sep 25, 2019
Published online: Mar 18, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.