Compression Splices of GFRP Bars in Unconfined and Confined Concrete Columns
Publication: Journal of Composites for Construction
Volume 23, Issue 6
Abstract
Although the use of glass fiber–reinforced polymer (GFRP) bars as compression reinforcement in RC columns has been extensively investigated, no research has been conducted on spliced GFRP bars under compression. This study presents an experimental program aimed at providing more insight into the effects of confinement on the behavior of spliced GFRP bars under compression. The test variables were confinement and compression-bar splice length. The test matrix included 14 circular concrete columns that were tested under concentric compression loading. Nine of the specimens were confined with GFRP spirals at two different spacings (40 and 80 mm), whereas the rest were reinforced longitudinally without transverse reinforcement. The test results are presented and discussed in terms of load–displacement behavior, failure mode, splice strength, and load–strain behavior. The postpeak behavior of the columns improved significantly with increasing levels of confinement. The bond and end-bearing contributions are described in detail. A regression analysis of the experimental results is presented, along with an analytical model proposed for predicting the strength of spliced GFRP bars under compression. The model estimates splice strength with satisfactory accuracy.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their special thanks and gratitude to the Natural Science and Engineering Research Council of Canada (NSERC), the Canada Research Chair in Advanced FRP Composite Materials for Civil Structures, the NSERC Research Chair in FRP Reinforcement for Concrete Infrastructure, the Fonds de la recherche du Québec en nature et technologies (FRQ-NT), Mathematics of Information Technology and Complex Systems (MITACS), the Canadian Foundation for Innovation (CFI), and the technical staff of the structural lab in the Department of Civil Engineering at the University of Sherbrooke.
References
AASHTO. 2018. AASHTO LRFD bridge design guide specifications for GFRP-reinforced concrete. 2nd ed. Washington, DC: AASHTO.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete (ACI 318M-14) and commentary. ACI318RM. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2015. Guide for the design and construction of structural concrete reinforced with FRP bars. ACI 440.1R-15. Farmington Hills, MI: ACI.
Afifi, M. Z., H. M. Mohamed, and B. Benmokrane. 2014. “Axial capacity of circular concrete columns reinforced with GFRP bars and spirals.” J. Compos. Constr. 18 (1): 1–11. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000438.
ASTM. 2011. Standard test method for tensile properties of fiber reinforced polymer matrix. ASTM D7205M-06. West Conshohocken, PA: ASTM.
Cairns, J. 1985. “Strength of compression splices a reevalution of test data.” ACI J. 82 (4): 510–516.
Cairns, J. 2014. “Staggered lap joints for tension reinforcement.” Struct. Concr. 15 (1): 45–54. https://doi.org/10.1002/suco.201300041.
Cairns, J., and P. D. Arthur. 1979. “Strength of lapped splices in reinforced concrete columns.” J. Proc. 76 (2): 277–296.
CAN (Canadian Standards Association). 2012. Design and construction of building structures with fiber reinforced polymers. CAN/CSA S806. Mississauga, ON: CAN.
CAN (Canadian Standards Association). 2014. Canadian highway bridge design code. CAN/CSA S6. Mississauga, ON: CAN.
Chun, S., S. Lee, and B. Oh. 2010a. “Compression lap splice in unconfined concrete of 40 and 60 MPa (5800 and 8700 psi) compressive strengths.” ACI Struct. J. 107 (2): 170–178.
Chun, S., S. Lee, and B. Oh. 2010b. “Compression splices in confined concrete of 40 and 60 MPa (5800 and 8700 psi) compressive strengths.” ACI Struct. J. 107 (4): 1–10.
Chun, S., S. Lee, and B. Oh. 2012. “Compression splices in high-strength concrete of 100 MPa (14, 500 psi) and less.” ACI Struct. J. 108 (6): 715–724.
De Luca, A., F. Matta, and A. Nanni. 2010. “Behavior of full-scale glass fiber-reinforced polymer reinforced concrete columns under axial load.” ACI Struct. J. 107 (5): 589–596.
Hadhood, A., H. M. Mohamed, and B. Benmokrane. 2016. “Axial load-moment interaction diagram of circular concrete columns reinforced with CFRP bars and spirals: Experimental and theoretical investigations.” J. Compos. Constr. 21 (2): 4016092. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000748.
Kupfer, H. B., and K. H. Gerstle. 1969. “Behavior of concrete under biaxial stresses.” J. Proc. 66 (8): 656–666.
Lotfy, E. M. 2010. “Behavior of reinforced concrete short columns with fiber reinforced polymers bars.” Int. J. Civ. Struct. Eng. 1 (3): 545–557.
Metelli, G., E. Marchina, and G. A. Plizzari. 2017. “Experimental study on staggered lapped bars in fiber reinforced concrete beams.” Compos. Struct. 179 (Nov): 655–664. https://doi.org/10.1016/j.compstruct.2017.07.069.
Park, R., and T. Paulay. 1974. Reinforced concrete structures. New York: Wiley.
Pfister, J. P., and A. H. Mattock. 1963. “High strength bars as concrete reinforcement, Part 5: Lap splices in concentrically loaded columns.” J. PCA Res. Dev. Lab. 5 (2): 27–40.
Pultrall. 2015. “Data sheet.” Accessed January 15, 2015. www.pultrall.com.
Tobbi, H., A. S. Farghaly, and B. Benmokrane. 2012. “Concrete columns reinforced longitudinally and transversally with glass fiber-reinforced polymer bars.” ACI Struct. J. 109 (4): 551–558.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 5, 2018
Accepted: Mar 28, 2019
Published online: Sep 14, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 14, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.