Shear Behavior Model for FRP-Confined and Unconfined Rubberized Concrete
Publication: Journal of Composites for Construction
Volume 23, Issue 5
Abstract
This paper presents the experimental and numerical results of an ongoing investigation aimed at developing high-strength, high-deformability fiber-reinforced polymer (FRP) confined rubberized concrete (CRuC) suitable for structural applications. The rubberized concrete (RuC) utilizes recycled rubber particles as a replacement for both fine and coarse aggregates. Rubber aggregates reduce the compressive strength and stiffness of RuC, thus limiting its application for structural purposes. Confining RuC with FRP jackets recovers strength and enables the development of high deformability, ductility, and energy dissipation capacity. Recent research mainly focuses on the axial performance of RuC and CRuC, but little work exists on the shear behavior of this flexible concretes. This paper adopts a nonlinear numerical approach for the practical implementation of the smeared, fixed-angle crack approach in finite element analysis to predict the shear response of RuC and CRuC. Constitutive models are proposed on the basis of fundamental test results. The model is validated through a simulation of a series of shear tests on RuC and CRuC with different shear span-to-depth ratios (). The model predictions are then compared against the experimental results, and good agreement is found.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research leading to these results has received funding from the European Union Seventh Framework Programme [FP7/2007–2013] under Grant Agreement No. 603722. The first author is supported by a scholarship from the China Scholarship Council (CSC) under Grant CSC No. 201608060059.
References
Abaqus. 2014. Abaqus analysis user’s manual: Version 6.14. Waltham, MA: Dassault Systèmes.
ACI (American Concrete Institute). 2002. Building code requirements for structural concrete. Farmington Hills, MI: ACI.
Alecci, V., S. Briccoli Bati, and G. Ranocchiai. 2014. “Concrete columns confined with CFRP wraps.” Mater. Struct. 47 (3): 397–410. https://doi.org/10.1617/s11527-013-0068-7.
Bažant, Z. P., and B. H. Oh. 1983. “Crack band theory for fracture of concrete.” Matériaux et construction 16 (3): 155–177. https://doi.org/10.1007/BF02486267.
Birrcher, D., R. Tuchscherer, M. Huizinga, O. Bayrak, S. L. Wood, and J. O. Jirsa. 2009. Strength and serviceability design of reinforced concrete deep beams. Austin, TX: Center for Transportation Research.
Bompa, D. V., A. Y. Elghazouli, B. Xu, P. J. Stafford, and A. M. Ruiz-Teran. 2017. “Experimental assessment and constitutive modelling of rubberised concrete materials.” Constr. Build. Mater. 137 (Apr): 246–260. https://doi.org/10.1016/j.conbuildmat.2017.01.086.
Collins, M. P. 1973. “Torque-twist characteristics of reinforced concrete beams.” In Inelastically and nonlinearity in structural concrete, 211–231. Waterloo, Canada: University of Waterloo Press.
Eldin, N. N., and A. B. Senouci. 1993. “Rubber-tire particles as concrete aggregate.” J. Mater. Civ. Eng. 5 (4): 478–496. https://doi.org/10.1061/(ASCE)0899-1561(1993)5:4(478).
Freakley, P. K., and A. R. Payne. 1978. Theory and practice of engineering with rubber. London: Applied Science.
Guo, Z. 2014. Principles of reinforced concrete. Oxford, UK: Butterworth-Heinemann.
Hsu, T. T. 1988. “Softened truss model theory for shear and torsion.” ACI Struct. J. 85 (6): 624–635.
Kani, G. N. 1979. Kani on shear in reinforced concrete, 225. Toronto: University of Toronto Press.
Khatib, Z. K., and F. M. Bayomy. 1999. “Rubberized portland cement concrete.” J. Mater. Civ. Eng. 11 (3): 206–213. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(206).
Lam, L., and J. G. Teng. 2003a. “Design-oriented stress-strain model for FRP-confined concrete.” Constr. Build. Mater. 17 (6–7): 471–489. https://doi.org/10.1016/S0950-0618(03)00045-X.
Lam, L., and J. G. Teng. 2003b. “Design-oriented stress-strain model for FRP-confined concrete in rectangular columns.” J. Reinf. Plast. Compos. 22 (13): 1149–1186. https://doi.org/10.1177/0731684403035429.
Lam, L., J. G. Teng, C. H. Cheung, and Y. Xiao. 2006. “FRP-confined concrete under axial cyclic compression.” Cem. Concr. Compos. 28 (10): 949–958. https://doi.org/10.1016/j.cemconcomp.2006.07.007.
Li, G., D. Maricherla, K. Singh, S. S. Pang, and M. John. 2006. “Effect of fiber orientation on the structural behavior of FRP wrapped concrete cylinders.” Compos. Struct. 74 (4): 475–483. https://doi.org/10.1016/j.compstruct.2005.05.001.
Medina, N. F., R. Garcia, I. Hajirasouliha, K. Pilakoutas, M. Guadagnini, and S. Raffoul. 2018. “Composites with recycled rubber aggregates: Properties and opportunities in construction.” Constr. Build. Mater. 188 (Nov): 884–897. https://doi.org/10.1016/j.conbuildmat.2018.08.069.
Naito, C., J. States, C. Jackson, and B. Bewick. 2014. “Assessment of crumb rubber concrete for flexural structural members.” J. Mater. Civ. Eng. 26 (10): 04014075. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000986.
Ozbakkaloglu, T., and E. Akin. 2012. “Behavior of FRP-confined normal-and high-strength concrete under cyclic axial compression.” J. Compos. Constr. 16 (4): 451–463. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000273.
Pang, X. B. D., and T. T. Hsu. 1995. “Behavior of reinforced concrete membrane elements in shear.” ACI Struct. J. 92 (6): 665–679.
Pang, X. B. D., and T. T. Hsu. 1996. “Fixed angle softened truss model for reinforced concrete.” ACI Struct. J. 93 (2): 196–208.
Pessiki, S., K. A. Harries, J. T. Kestner, R. Sause, and J. M. Ricles. 2001. “Axial behavior of reinforced concrete columns confined with FRP jackets.” J. Compos. Constr. 5 (4): 237–245. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:4(237).
Pilakoutas, K. 2017. “Anagennisi: Innovative reuse of all tyre components in concrete.” Accessed July 04, 2019. https://cordis.europa.eu/project/rcn/111538.
Pilakoutas, K., S. Raffoul, P. Papastergiou, R. Garcia, M. Guadagnini, and I. Hajirasouliha. 2015. “Innovative reuse of all tyre components in concrete: The Anagennisi project.” In Proc., Int. Conf. on Sustainable Structural Concrete, 259–268. La Plata, Argentina.
Raffoul, S., R. Garcia, D. Escolano-Margarit, M. Guadagnini, I. Hajirasouliha, and K. Pilakoutas. 2017. “Behaviour of unconfined and FRP-confined rubberised concrete in axial compression.” Constr. Build. Mater. 147 (Aug): 388–397. https://doi.org/10.1016/j.conbuildmat.2017.04.175.
Raffoul, S., R. Garcia, K. Pilakoutas, M. Guadagnini, and N. F. Medina. 2016. “Optimisation of rubberised concrete with high rubber content: An experimental investigation.” Constr. Build. Mater. 124 (Oct): 391–404. https://doi.org/10.1016/j.conbuildmat.2016.07.054.
Robinson, J. R., and J. M. Demorieux. 1968. “Essais de traction-compression sur modèles d’âme de poutre en béton armé.” In Compte rendu des recherches effectuées en 1968, Annales ITBTP, 980–982. Paris, France: Institut de recherches appliquées du béton armé.
Saadatmanesh, H., M. R. Ehsani, and M. W. Li. 1994. “Strength and ductility of concrete columns externally reinforced with fiber composite straps.” ACI Struct. J. 91 (4): 434–447.
Sienkiewicz, M., J. Kucinska-Lipka, H. Janik, and A. Balas. 2012. “Progress in used tyres management in the European Union: A review.” Waste Manage. 32 (10): 1742–1751. https://doi.org/10.1016/j.wasman.2012.05.0.
Teng, J. G., T. Jiang, L. Lam, and Y. Z. Luo. 2009. “Refinement of a design-oriented stress-strain model for FRP-confined concrete.” J. Compos. Constr. 13 (4): 269–278. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000012.
Vecchio, F. J., and M. P. Collins. 1986. “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI Struct. J. 83 (2): 219–231.
Zhu, R. R., T. T. Hsu, and J. Y. Lee. 2001. “Rational shear modulus for smeared-crack analysis of reinforced concrete.” ACI Struct. J. 98 (4): 443–450.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 28, 2018
Accepted: Feb 7, 2019
Published online: Aug 2, 2019
Published in print: Oct 1, 2019
Discussion open until: Jan 2, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.