Experimental Investigation of Rectangular Air-Cured Geopolymer Concrete Columns Reinforced with GFRP Bars and Stirrups
Publication: Journal of Composites for Construction
Volume 23, Issue 3
Abstract
Glass fiber-reinforced polymer (GFRP) bars in construction are increasing in popularity due to their excellent corrosion resistance, high tensile strength to weight ratio, and low maintenance. Geopolymer is a modern cementitious material that is known for its corrosion resistance and low carbon footprint. Combining the two could produce a green yet durable composite material that can be applied to aggressive environments such as Australia’s coastal zones. This paper experimentally investigates the load-moment interaction of GFRP-reinforced air-cured geopolymer concrete columns. The behavior of reinforced geopolymer concrete under combined loading were studied with 11 half-scale specimens. Three different stirrup spacings (75, 150, and 250 mm) were examined. Effective confinement was achieved by reducing the stirrup spacing such that high strains were measured in the concentric columns with closely spaced (75 mm) stirrups. A comparison between the experimental data and international design codes showed that such codes were conservative when ignoring the compressive strengths of the longitudinal GFRP bars. The experimental results were better represented when the compressive strengths of the bars were included; on average, the GFRP-reinforced geopolymer concrete columns exhibited 10.8% increase in strength with respect to unreinforced concrete sections.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is supported by 111 Project of China (Grant No. B18062). The authors thank the donations and support provided by Pultron Composites, New Zealand. The authors acknowledge the support received from Gary Boon and Anthony Miles from Sika in Australia. Thanks are also given to former student Mr. Jordan Beard and laboratory technicians Mr. Jim Waters, Mr. Brad Rose, and Mr. Matt Arpin for the help with the many practical aspects of this project.
References
ACI (American Concrete Institute). 2015. Guide for the design and construction of concrete reinforced with FRP bars. ACI 440.1R. Farmington Hills, MI: ACI.
Amer, A., M. Arockiasamy, and M. Shahawy. 1996. “Ultimate strength of eccentrically loaded concrete columns reinforced with CFRP bars.” In Proc., 2nd Int. Conf. on Advanced Composite Materials in Bridges and Structures (ACMBS-II), 209–216. Montréal, Canada: Canadian Society for Civil Engineering.
AS (Standards Australia). 2009. Concrete structures. AS 3600. Sydney, Australia: Standards Australia.
AS (Standards Australia). 2014. Methods of testing concrete: Determination of the modulus of rupture. AS 1012.11. Sydney, Australia: Standards Australia.
ASTM. 2015. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
Berndt, M. 2017. Guide to specification and use of geopolymer concrete with case studies. Sydney, Australia: Standards Australia.
CAN/CSA (Canadian Standards Association/National Standard of Canada). 2017. Design and construction of building components with fibre-reinforced polymers. CAN/CSA S806-12. Mississauga, ON, Canada: CAN/CSA.
Choo, C. C., I. E. Harik, and H. Gesund. 2006. “Minimum reinforcement ratio for fiber-reinforced polymer reinforced concrete rectangular columns.” ACI Struct. J. 103 (3): 460–466.
Davidovits, J. 1994. “High-alkali cements for 21st century concretes.” Am. Concr. Inst. 144: 383–398.
Duxson, P., A. Fernández-Jiménez, J. L. Provis, G. C. Lukey, A. Palomo, and J. S. J. Van Deventer. 2007a. “Geopolymer technology: The current state of the art.” J. Mater. Sci. 42 (9): 2917–2933. https://doi.org/10.1007/s10853-006-0637-z.
Duxson, P., J. L. Provis, G. C. Lukey, and J. S. J. van Deventer. 2007b. “The role of inorganic polymer technology in the development of ‘green concrete.’” Cem. Concr. Res. 37 (12): 1590–1597. https://doi.org/10.1016/j.cemconres.2007.08.018.
Elchalakani, M., and G. Ma. 2017. “Tests of glass fibre reinforced polymer rectangular concrete columns subjected to concentric and eccentric axial loading.” Eng. Struct. 151: 93–104. https://doi.org/10.1016/j.engstruct.2017.08.023.
Elchalakani, M., G. Ma, F. Aslani, and W. Duan. 2017. “Design of GFRP-reinforced rectangular concrete columns under eccentric axial loading.” Mag. Concr. Res. 69 (17): 865–877. https://doi.org/10.1680/jmacr.16.00437.
Hadi, M., H. Karim, and N. Sheikh. 2016. “Experimental investigations on circular concrete columns reinforced with GFRP bars and helices under different loading conditions.” J. Compos. Constr. 20 (4): 04016009. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000670.
Hadi, M., and J. Youssef. 2016. “Experimental investigation of GFRP-reinforced and GFRP-encased square concrete specimens under axial and eccentric load, and four-point bending test.” J. Compos. Constr. 20 (5): 04016020. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000675.
Hamidi, R. M., Z. Man, and K. A. Azizli. 2016. “Concentration of NaOH and the effect on the properties of fly ash based geopolymer.” Procedia Eng. 148: 189–193. https://doi.org/10.1016/j.proeng.2016.06.568.
Karim, H., M. N. Sheikh, and M. N. S. Hadi. 2016. “Axial load-axial deformation behaviour of circular concrete columns reinforced with GFRP bars and helices.” Constr. Build. Mater. 112: 1147–1157. https://doi.org/10.1016/j.conbuildmat.2016.02.219.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, and A. Nazari. 2016. “Suitability of Sarawak and Gladstone fly ash to produce geopolymers: A physical, chemical, mechanical, mineralogical and microstructural analysis.” Ceram. Int. 42 (8): 9613–9620. https://doi.org/10.1016/j.ceramint.2016.03.046.
Maranan, G. B., A. C. Manalo, B. Benmokrane, W. Karunasena, and P. Mendis. 2015. “Evaluation of the flexural strength and serviceability of geopolymer concrete beams reinforced with glass-fibre-reinforced polymer (GFRP) bars.” Eng. Struct. 101: 529–541. https://doi.org/10.1016/j.engstruct.2015.08.003.
Maranan, G. B., A. C. Manalo, B. Benmokrane, W. Karunasena, and P. Mendis. 2016. “Behavior of concentrically loaded geopolymer-concrete circular columns reinforced longitudinally and transversely with GFRP bars.” Eng. Struct. 117: 422–436. https://doi.org/10.1016/j.engstruct.2016.03.036.
Mirmiran, A., W. Yuan, and X. Chen. 2001. “Design for slenderness in concrete columns internally reinforced with fiber-reinforced polymer bars.” ACI Struct. J. 98 (1): 116–125.
Murray, N. W. 1984. Introduction to the theory of thin-walled structures, Oxford Engineering Science Series. Oxford: Clarendon Press.
Palomo, A., M. T. Blanco-Varela, M. L. Granizo, F. Puertas, T. Vazquez, and M. W. Grutzeck. 1999. “Chemical stability of cementitious materials based on metakaolin.” Cem. Concr. Res. 29 (7): 997–1004. https://doi.org/10.1016/S0008-8846(99)00074-5.
Rahman, M. M., and P. K. Sarker. 2011. “Geopolymer concrete columns under combined axial load and biaxial bending.” In Proc., Concrete 2011 Conf. Perth, Australia: Concrete Institute of Australia.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 23, 2018
Accepted: Oct 17, 2018
Published online: Feb 23, 2019
Published in print: Jun 1, 2019
Discussion open until: Jul 23, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.