Experimental Study of FRP-Reinforced Slotted RC Shear Walls under Cyclic Loading
Publication: Journal of Composites for Construction
Volume 22, Issue 4
Abstract
The seismic performance of slotted reinforced concrete walls strengthened with fiber-reinforced polymer (FRP) was investigated. This reinforcement method aims to increase the ultimate deformation capacity and avoid compressive damage to the concrete. To compare the performance of the slotted RC walls with and without FRP reinforcement, pseudostatic tests were conducted on two conventional slotted RC walls and two FRP-reinforced slotted RC walls. The slotted RC walls reinforced with FRP exhibited significantly improved deformation capacity and were able to sustain a drift ratio without obvious damage, while the ultimate deformation of the slotted RC wall without FRP reinforcement could only sustain a drift ratio of about . Furthermore, a partial FRP retrofitting method can fully recover the load-bearing capacity of the wall. The results confirm the effectiveness of FRP reinforcement in a slotted RC wall. However, the initial stiffness and energy dissipation capacity were not regained completely through the FRP reinforcement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the Natural Science Foundation of China under Grant Nos. 51422809 and 51778342, the Beijing Science and Technology Program under Grant No. Z161100001216015, and the state key research project in the 13th Five-Year Plan under Grant No. 2016YFC0701901 are gratefully acknowledged.
References
Deng, K. 2016. “Development of earthquake resilient slotted RC wall-energy dissipation coupling beam structure.” [In Chinese.] Ph.D. dissertation, Tsinghua Univ.
Deng, K., P. Pan, H. Wang, and S. Shen. 2017. “Experimental study on slotted RC wall with steel energy dissipation links for seismic protection of buildings.” Eng. Struct. 145 (8): 1–11. https://doi.org/10.1016/j.engstruct.2017.05.006.
Deng, K., P. Pan, D. Zhang, W. Li, and Y. Li. 2016. “Experimental study of slotted reinforced concrete slab at shear wall-slab interface.” [In Chinese.] J Build Struct. 37 (4): 26–31.
El-Tawil, S., K. A. Harries, P. J. Fortney, B. M. Shahrooz, and Y. Kurama. 2010. “Seismic design of hybrid coupled wall systems: State of the art.” J. Struct. Eng. 136 (7): 755–769. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000186.
Feng, P., S. Cheng, Y. Bai, and L. Ye. 2015. “Mechanical behavior of concrete-filled square steel tube with FRP-confined concrete core subjected to axial compression.” Compos. Struct. 123 (5): 312–324. https://doi.org/10.1016/j.compstruct.2014.12.053.
Hidalgo, P. A., C. A. Ledezma, and R. M. Jordan 2002. “Seismic behavior of squat reinforced concrete shear walls.” Earthquake Spectra 18 (2): 287–308.
Hu, H., and R. Seracino. 2013. “Analytical model for FRP-and-steel-confined circular concrete columns in compression.” J. Compos. Constr. 18 (3): A4013012. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000394.
Idris, Y., and T. Ozbakkaloglu. 2016. “Behavior of square fiber reinforced polymer–high-strength concrete–steel double-skin tubular columns under combined axial compression and reversed-cyclic lateral loading.” Eng Struct. 118 (7): 307–319. https://doi.org/10.1016/j.engstruct.2016.03.059.
Ji, X., Y. Sun, J. Qian, and X. Lu. 2015. “Seismic behavior and modeling of steel reinforced concrete (SRC) walls.” Earthquake Eng. Struct. Dyn. 44 (6): 955–972. https://doi.org/10.1002/eqe.v44.6.
Lim, J. C., and T. Ozbakkaloglu. 2013. “Confinement model for FRP-confined high-strength concrete.” J. Compos. Constr. 18 (4): 04013058. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000376.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010. Code for seismic design of buildings. [In Chinese.] GB50011-2010. Beijing: China Architecture and Building Press.
Ozbakkaloglu, T. 2013. “Axial compressive behavior of square and rectangular high-strength concrete-filled FRP tubes.” J. Compos. Constr. 17 (1): 151–161. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000321.
Saleem, S., Q. Hussain, and A. Pimanmas. 2016. “Compressive behavior of PET FRP–confined circular, square, and rectangular concrete columns.” J. Compos. Constr. 21 (3): 04016097. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000754.
Sezen, H., A. S. Whittaker, K. J. Elwood, and K. M. Mosalam 2003. “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey.” Eng. Struct. 25 (1): 103–114.
Wang, Z., D. Wang, D. Lu, and R. Guo. 2011. “Stress-strain model for CFRP moderately-confined reinforced concrete square columns.” [In Chinese.] J Build Struct. 32 (4): 101–109.
Xie, T., and T. Ozbakkaloglu. 2015. “Behavior of steel fiber-reinforced high-strength concrete-filled FRP tube columns under axial compression.” Eng. Struct. 90 (5): 158–171. https://doi.org/10.1016/j.engstruct.2015.02.020.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 13, 2016
Accepted: Feb 9, 2018
Published online: May 21, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 21, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.