Hybrid Composite Beam Bridge Superstructure Design Considerations for Thermal Gradient
Publication: Journal of Composites for Construction
Volume 22, Issue 3
Abstract
The hybrid composite beam (HCB) is an innovative idea that incorporates traditional construction materials (i.e., steel and concrete) with fiber-reinforced polymer (FRP) composites in an efficient configuration to optimize the beam constituents’ performance. The HCB is comprised of three main subcomponents: a composite shell, a compression reinforcement, and a tension reinforcement. The shell is comprised of a glass-fiber-reinforced polymer (GFRP) box. The compression reinforcement consists of self-consolidating concrete (SCC) that is pumped into a profiled conduit within the shell. The tension reinforcement consists of galvanized-steel tendons anchored at the compression reinforcement ends. The HCB is a promising technology in bridge applications because it has several advantages over the conventional structural members (e.g., a prolonged lifetime and a lighter weight). This new technology was recently used to construct three bridges in Missouri. This research study performs the first investigation and analysis for an in-service HCB bridge superstructure’s behavior subjected to thermal loads and proposes a thermal design methodology. This investigation is crucial because the thermal stresses, if not accounted for during the design, can significantly affect a bridge superstructure’s durability, which this new HCB technology strives to address. Beam elements from the longest-spanning HCB constructed bridge in Missouri were instrumented with various strain gauges and thermocouples. The constituting elements’ temperatures and the corresponding induced strains were recorded over 6 months. The proposed algorithm was used to predict the induced strains. A two-step thermostructural finite-element analysis (FEA) was performed to analyze the HCB’s thermal behavior and further evaluate the proposed algorithm’s performance. The results of this study showed that the proposed algorithm was able to predict, with acceptable accuracy, the thermal stresses and strains in a HCB bridge superstructure. Subsequently, this algorithm is recommended as a useful tool for designing and analyzing HCB bridges that are undergoing environmental thermal effects. The current study also presents recommendations for modifying the thermal gradients recommended by AASHTO for the thermal design of reinforced concrete (RC) superstructures to better suit HCB bridges. Finally, the study proposed techniques for increasing the stiffness of a HCB bridge superstructure, while at the same time minimizing the induced thermal stresses under temperature fluctuations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the Missouri Department of Transportation (MoDOT) and the National University Transportation Center (NUTC) at Missouri S&T for sponsoring this research study. The staff support from the Dept. of Civil, Architectural and Environmental Engineering and the Center for Infrastructure Engineering Studies (CIES) at Missouri S&T is also greatly appreciated.
References
AASHTO. (1996). “Standard specifications for highway bridges.” Washington, DC.
AASHTO. (1998). “Guide specifications for thermal effects in concrete bridge superstructures.” Washington, DC.
AASHTO. (2012). “AASHTO LRFD bridge design specifications.” Washington, DC.
Aboelseoud, M. A. (2015). “An integrated study for hybrid composite beam (HCB) structures.” Ph.D. dissertation, Missouri Univ. of Science and Technology, Rolla, MO.
Aboelseoud, M. A., and Myers, J. J. (2014). “Finite element modeling of hybrid composite beam bridge in Missouri, USA.” J. Bridge Eng., 04014054.
Aboelseoud, M. A., and Myers, J. J. (2016). “Durability of hybrid composite beam bridges subjected to various environmental conditioning.” J. Compos. Constr., 04016045.
ACI (American Concrete Institute). (2011). “Building code requirements for structural concrete and commentary.” ACI 318-11, Farmington Hills, MI.
Ahsan, S. (2012). “Evaluation of hybrid-composite beam for use in Tide Mill Bridge.” M.S. thesis, Virginia Tech, Blacksburg, VA.
ANSYS version 14.0 [Computer software]. ANSYS, Canonsburg, PA.
Bazant, Z. P., and Kaplan, M. F. (1996). Concrete at high temperatures: Material properties and mathematical models, Longman Group Limited, London.
European Guidelines. (2005). “The European guidelines for self-compacting concrete, specification, production and use: BIBM, CEMBUREAU, ERMCO, EFCA, and EFNARC.” ⟨⟩ (May 2005).
Devendra, K., and Rangaswamy, T. (2012). “Evaluation of thermal properties of E-glass/epoxy composites filled by different filler materials.” Int. J. Comput. Eng. Res., 2(5), 1708–1714.
Friis, E. A., Lakes, R. S., and Park, J. B. (1988). “Negative Poisson’s ratio polymeric and metallic foams.” J. Mater. Sci., 23(12), 4406–4414.
Gross, S. P. (1999). “Field performance of prestressed high performance concrete highway bridges in Texas.” Ph.D. dissertation, Univ. of Texas at Austin, Austin, TX.
Hawileh, R., Naser, M., Zaidan, W., and Rasheed, H. (2009). “Modeling of insulated CFRP-strengthened reinforced concrete T-beam exposed to fire.” Eng. Struct., 31(12), 3072–3079.
Hillman, J. R. (2003). “Investigation of a hybrid-composite beam system.”, Transportation Research Board of National Academies, Chicago.
Hillman, J. R. (2008). “Product application of a hybrid-composite beam system.”, Transportation Research Board of National Academies, Chicago.
Hillman, J. R. (2012). “Hybrid-composite beam (HCB) design and maintenance manual.” Missouri Dept. of Transportation, Jefferson City, MO.
Imbsen, R., Vandershaf, D., Schamber, R., and Nutt, R. (1985). “Thermal effects in concrete bridge superstructures.”, Transportation Research Board, Washington, DC.
Johnson, J. (2005). “Concrete bridge deck behavior under thermal loads.” M.S. thesis, Montana State Univ.-Bozeman, Bozeman, Montana.
Kachlakev, D., Miller, T., Yim, S., Chansawat, K., and Potisuk, T. (2001). “Finite element modeling of concrete structures strengthened with FRP laminates.”, Oregon DOT Research Group, Salem, OR.
Khaliq, W., and Kodur, V. (2011). “Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures.” Cem. Conc. Res., 41(11), 1112–1122.
Mahama, F., Walter, D. C., Currier, N., Hamilton, H., and Consolazio, G. R. (2009). “Validation of stresses caused by thermal gradients in segmental concrete construction.”, Univ. of Florida, Gainesville, FL.
Mascaro, M. G., and Moen, C. D. (2012). “Out-of-plane web deformation and relative arch movement of hybrid-composite beams based on photogrammetry.”, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
MATLAB [Computer software]. MathWorks, Natick, MA.
Myers, J. J., Aboelseoud, M. A., Earley, C. R., and Washer, G. (2014). “Field evaluation of hybrid-composite girder bridges in Missouri.” Missouri Dept. of Transportation, Jefferson City, MO.
Myers, J. J., Holdener, D. J., Merkle, W., and Hernandez, E. (2008). “Preservation of Missouri transportation infrastructures: Validation of FRP composite technology through field testing—In-situ load testing of bridges P-962, T-530, X-495, X-596 and Y-298.” Missouri Dept. of Transportation, Jefferson City, MO.
Neville, A. M. (1995). Properties of concrete, Vol. 4, Longman, London.
Nosdall, S. V. (2013). “Experiments on a hybrid composite beam for bridge applications.” Master’s thesis, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
Okamura, H., and Ouchi, M. (2003). “Self-compacting concrete.” J. Adv. Concr. Technol., 1(1), 5–15.
Radolli, M., and Green, R. (1976). “Thermal stresses in concrete bridge superstructures under summer conditions.” Transportation Research Record, Vol. 547, Transportation Research Board, Washington, DC.
Rafi, M. M., Nadjai, A., and Ali, F. (2008). “Finite element modeling of carbon fiber-reinforced polymer reinforced concrete beams under elevated temperatures.” ACI Struct. J., 105(6), 701–710.
SAP2000 version 14 [Computer software]. Computers and Structures, Inc., Berkeley, CA.
Snape, T., and Lindyberg, R. (2009). Test results: HC beam for the Knickerbocker Bridge, Univ. of Maine, Orono, ME.
Topçu, I. B., and Uygunoğlu, T. (2010). “Effect of aggregate type on properties of hardened self-consolidating lightweight concrete (SCLC).” Constr. Build. Mater., 24(7), 1286–1295.
Uygunoğlu, T., and Topçu, I. B. (2009). “Thermal expansion of self-consolidating normal and lightweight aggregate concrete at elevated temperature.” Constr. Build. Mater., 23(9), 3063–3069.
Yazdani, N., Eddy, S., and Cai, C. S. (2000). “Effect of bearing pads on precast prestressed concrete bridges.” J. Bridge Eng., 224–232.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 22 • Issue 3 • June 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Apr 13, 2017
Accepted: Dec 18, 2017
Published online: Mar 9, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 9, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.