Deflection of FRP Prestressed Concrete Beams
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Composites for Construction
Volume 22, Issue 2
Abstract
The lower elastic modulus of fiber-reinforced polymer (FRP) bars over steel rebar renders the postcracking deflection of FRP concrete beams critical under serviceability limit states. To predict the deflection of FRP prestressed concrete (PSC) beams, the American Concrete Institute (ACI) utilizes a semiempirical equation of effective moment of inertia (), originally developed and calibrated for steel reinforced concrete beams, and applies a reduction factor to account for the low elastic modulus of FRP bars. In this paper, a mechanics-based relationship for is developed using the moment-curvature behavior of FRP PSC sections. From this a beam deflection equation is derived for general loading conditions. The proposed equation is verified using experimental observations that cover various ratios of the cracked-to-gross moment of inertia (). The comparative results reveal that the ACI equation unrealistically underestimates the deflection for low ratios (), which is the case for lightly reinforced FRP PSC beams and one-way slabs. However, for higher ratios (), for which the semiempirical ACI equation was originally calibrated, reasonable predictions are observed. The proposed equation, which offers an implicit flexibility formulation as opposed to the stiffness formulation adopted by ACI, provides more accurate predictions of deflection regardless of the ratio.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American Concrete Institute) (2004). “Prestressing concrete structures with FRP tendons.” ACI 440.4R-04, Farmington Hills, MI.
ACI (American Concrete Institute). (2006). “Guide for the design and construction of structural concrete reinforced with FRP bars.” ACI 440.1R-06, Farmington Hills, MI.
Benmokrane, B., Chaallal, O., and Masmoudi, R. (1996). “Flexural response of concrete beams reinforced with FRP reinforcing bars.” ACI Struct. J., 91(2), 46–55.
Bischoff, P. H. (2005). “Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars.” J. Struct. Eng., 752–767.
Bischoff, P. H. (2007a). “Deflection calculation of FRP reinforced concrete beams based on modifications to the existing Branson equation.” J. Compos. Constr., 4–14.
Bischoff, P. H. (2007b). “Effective moment of inertia for calculating deflections of concrete members containing steel reinforcement and fiber-reinforced polymer reinforcement.” ACI Struct. J., 104(1), 68–75.
Bischoff, P. H. (2007c). “Rational model for calculating deflection of reinforced concrete beams and slabs.” Can. J. Civ. Eng., 34(8), 992–1002.
Branson, D. E. (1965). “Instantaneous and time-dependent deflections of simple and continuous reinforced beams.”, Alabama Highway Dept., Montgomery, AL.
Brown, V. L., and Bartholomew, C. L. (1996). “Long-term deflections of GFRP-reinforced concrete beams.” Proc., 1st Int. Conf. on Composites Infrastructure, Tucson, AZ, 389–400.
BSI (British Standards Institution). (1985). “Structural use of concrete. Code of practice for special circumstances.” BS 8110-2:1985, London.
CEN (European Committee for Standardization). (1992). “Design of concrete structures. Part 1-1: General rules for buildings.”, Brussels, Belgium.
CSA (Canadian Standards Association). (2002). “Design and construction of building components with fibre-reinforced polymers.” CSA S806-02, Rexdale, ON, Canada.
Cummings, W. D. (2014). “Analytical and experimental assessment of an AASHTO I-girder Type I prestressed with AFRP tendons.” M.S. thesis, Texas A&M Univ., College Station, TX.
Dolan, C. W., Nanni, A., Hamilton, H. R., and Bakis, C. E. (2001). “Design recommendations for concrete structures prestressed with FRP tendons.”, Federal Highway Administration, Washington, DC.
Dowling, N. (1993). Mechanical behavior of materials, Prentice Hall, Englewood Cliffs, NJ.
Faza, S. S., and GangaRao, H. V. S. (1992). “Pre- and post-cracking deflection behavior of concrete beams reinforced with fibre-reinforced plastic rebars.” Proc., Advanced Composite Materials in Bridges and Structures, Canadian Society for Civil Engineering, Montreal, 151–160.
Gilbert, R. I. (1999). “Deflection calculation for reinforced concrete structures-why we sometimes get it wrong.” ACI Struct. J., 96(6), 1027–1033.
Gilbert, R. I. (2007). “Tension stiffening in lightly reinforced concrete slabs.” J. Struct. Eng., 899–903.
Kim, Y. (2009). “Effective moment of inertia of concrete beams prestressed with aramid fiber-reinforced polymer (AFRP) tendons.” ACI Struct. J., 264, 147–162.
Kim, Y. (2010). “Flexural response of concrete beams prestressed with AFRP tendons: Numerical investigation.” J. Compos. Constr., 647–658.
Lees, M. J., and Burgoyne, J. C. (1999). “Experimental study of influence of bond on flexural behavior concrete beams pretensioned with aramid fiber reinforced plastics.” ACI Struct. J., 96(3), 377–385.
Mota, C., Alminar, S., and Svecova, D. (2006). “Critical review of deflection formulas for FRP-RC members.” J. Compos. Constr., 183–194.
Nawy, E. G. (2005). Prestressed concrete: A fundamental approach, 5th Ed., Pearson Education, Upper Saddle River, NJ.
Pirayeh Gar, S. (2012). “Structural performance of a full-depth precast bridge deck system prestressed and reinforced with AFRP bars.” Ph.D. thesis, Texas A&M Univ., College Station, TX.
Pirayeh Gar, S., Head, M., and Hurlebaus, S. (2012). “Tension stiffening in prestressed concrete beams using moment-curvature relationship.” J. Struct. Eng., 1075–1078.
Pirayeh Gar, S., Head, M., and Hurlebaus, S. (2013). “Computational modeling of aramid fiber-reinforced polymer prestressed girder in composite action with bridge deck.” ACI Struct. J., 110(6), 965–975.
Pirayeh Gar, S., Mander, J., Head, M., and Hurlebaus, S. (2014). “FRP slab capacity using yield line theory.” J. Compos. Constr., 04014021.
Saeed, Y. M. (2016). “Behavior of prestressed concrete beams with CFRP strands.” M.S. thesis, Portland State Univ., Portland, OR.
Sen, R., Shahawy, M., Rosas, J., and Sukumar, S. (1998). “Durability of aramid pretensioned elements in a marine environment.” ACI Struct. J., 95(5), 578–587.
Stoll, F., Saliba, E. J., and Casper, E. L. (2000). “Experimental study of CFRP-prestressed high-strength concrete bridge beams.” Compos. Struct., 49(2), 191–200.
Toutanji, H. A., and Saafi, M. (2000). “Flexural behavior of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars.” ACI Struct. J., 97(5), 712–719.
Washa, G. W., and Fluck, P. G. (1952). “Effect of compressive reinforcement on the plastic flow of reinforced concrete beams.” ACI Struct. J., 49(2), 89–108.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 11, 2016
Accepted: Sep 19, 2017
Published online: Dec 23, 2017
Published in print: Apr 1, 2018
Discussion open until: May 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.