Confined Concrete Elements with Cement-Based Composites: Confinement Effectiveness and Prediction Models
Publication: Journal of Composites for Construction
Volume 21, Issue 3
Abstract
This paper aims to analyze the results of compression tests conducted on fabric-reinforced cementitious matrix (FRCM)–confined concrete elements. The analysis is developed using a database of 152 compression tests on FRCM-wrapped, plain concrete cylindrical specimens assembled from the literature. The database is first used to analyze the influence of the relevant mechanical and geometric parameters on the structural response of the confined specimens. Then, empirical design–oriented models to predict the peak strength and the corresponding strain of the FRCM-wrapped specimens are proposed and verified with the experimental database through a best-fit analysis of the collected data. The performance of the proposed models is also compared to that of some existing models (which have been proposed in both the literature and codes) by using the database.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdelrahman, K., and El-Hacha, R. (2012). “Behavior of large-scale concrete columns wrapped with CFRP and SFRP sheets.” J. Compos. Constr., 430–439.
ACI (American Concrete Institute). (2008). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.”, Farmington, MI.
ACI (American Concrete Institute). (2013). “Guide to design and construction of externally bonded fabric-reinforced cementitious matrix systems for repair and strengthening concrete and masonry structures.”, Farmington, MI.
Bournas, D. A., Lontou, P., Papanicolau, C. G., and Triantafillou, T. G. (2007). “Textile-reinforced mortar versus fibre-reinforced polymer confinement in reinforced concrete columns.” ACI Struct. J., 104(6), 740–748.
Carloni, C., et al. (2015). Chapter 9, Fiber-reinforced composites with cementitious (inorganic) matrix, Springer, Berlin, 349–391.
Colajanni, P., De Domenico, F., Recupero, A., and Spinella, N. (2014). “Concrete columns confined with fibre-reinforced cementitious mortars: Experimentation and modeling.” Constr. Build. Mater., 52, 375–384.
D’Ambrisi, A., Focacci, F., and Mantegazza, G. (2011). “Confinamento del calcestruzzo con materiali FRCM: Analisi sperimentale e modellazione.” Proc., AICAP National Symp., AICAP, Rome (in Italian).
De Caso y Basalo, F., Matta, F., and Nanni, A. (2012). “Fiber-reinforced cement-based composite system for concrete confinement.” Constr. Build. Mater., 32, 55–65.
De Lorenzis, L., and Tepfers, R. (2003). “Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites.” J. Compos. Constr., 219–237.
Di Ludovico, M., Prota, A., and Manfredi, G. (2010). “Structural upgrade using basalt fibers for concrete confinement.” J. Compos. Constr., 541–552.
Garcia, D., Pello, A., San-José, J. T., Garmendia, L., and Perlot, C. (2010). “Confinement of medium strength concrete cylinders with basalt textile reinforced mortar.” Proc., ICPIC 2010–13th Int. Congress on Polymers in Concrete, Oficinas Gráficas de Barbosa & Xavier, Lda, Funchal, Madeira, Portugal.
Lam, I., and Teng, J. G. (2003). “Design-oriented stress-strain model for FRP-confined concrete.” Constr. Build. Mater., 17(6–7), 471–489.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 1804–1826.
Nanni, A., and Braford, N. M. (1995). “FRP-jacketed concrete under uniaxial compression.” Constr. Build. Mater., 9(2), 115–124.
Ombres, L. (2007). “Confinement effectiveness in concrete strengthened with fiber reinforced cement based composite jackets.” Proc., FRPRCS-8, 8th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Concrete Structures, T. C. Triantafillou, ed., Univ. of Patras, Patras, Greece.
Ombres, L. (2011). “Flexural analysis of reinforced concrete beams strengthened with a cement-based high strength composite material.” Compos. Struct., 94, 143–155.
Ombres, L. (2014). “Concrete confinement with a cement-based high-strength composite material.” Compos. Struct., 109, 294–304.
Ortlepp, R., Lorenz, A., and Curbach, M. (2011). “Geometry effect onto the load bearing capacity of column heads strengthened with TRC.” Proc., Fib Symp.: Concrete Engineering for Excellence and Efficiency, Prague, Czech Republic.
Peled, A. (2007). “Confinement of damaged and nondamaged structural concrete with FRP and TRC sleeves.” J. Compos. Constr., 514–522.
Pessiki, S., Harries, E. A., Kestner, J., Sause, R., and Ricles, J. M. (2001). “The axial behavior of concrete confined with fiber reinforced composite jackets.” J. Compos. Constr., 237–245.
Rochette, P., and Labossiere, P. (2000). “Axial testing of rectangular columns models confined with composites.” J. Compos. Constr., 129–136.
Sadeghian, P., and Fam, A. (2015). “Improved design-oriented confinement models for FRP-wrapped concrete cylinders based on statistical analyses.” Eng. Struct., 87, 162–182.
Spoelstra, M., and Monti, G. (1999). “FRP-confined concrete model.” J. Compos. Constr., 143–150.
Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2001). FRP-strengthened RC structures, Wiley, New York, 266.
Thermou, G. E., Katakalos, K., and Manos, G. (2015). “Concrete confinement with steel-reinforced grout jackets.” Mater. Struct., 48(5), 1355–1376.
Trapko, T. (2013). “Fibre reinforced cementitious matrix confined concrete elements.” Mater. Des., 44, 382–391.
Trapko, T. (2014). “Confined concrete elements with PBO-FRCM composites.” Constr. Build. Mater., 73, 332–338.
Triantafillou, T. C., Papanicolau, C. G., Zissimopoulos, P., and Laourdekis, T. (2006). “Concrete confinement with textile-reinforced mortar jackets.” ACI Struct. J., 103(1), 28–37.
Wang, Z., Wang, D., Smith, S. T., and Lu, D. (2012). “Experimental testing and analytical modeling of CFRP-confined large cylindrical RC columns subjected to cyclic axial compression.” Eng. Struct., 40, 64–74.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Feb 17, 2016
Accepted: Aug 5, 2016
Published online: Oct 12, 2016
Discussion open until: Mar 12, 2017
Published in print: Jun 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.