Preliminary Study to Enhance Ductility of CFRP-Strengthened RC Beam
Publication: Journal of Composites for Construction
Volume 21, Issue 1
Abstract
Fiber-reinforced polymer (FRP) strengthening systems are widely accepted in engineering practice as means to enhance the flexural strength of RC members, but resulting in decreased ductility. Brittle failure, i.e., FRP rupture, FRP delamination, or concrete cover separation, impairs the reliability of FRP strengthening system. A near surface–mounted (NSM) FRP strengthening system has similar drawbacks. As a possible solution, a design philosophy is proposed to enhance the ductility of the NSM-FRP system by triggering a global slip at the FRP–adhesive interface. The corresponding design method is developed to induce the ductile failure and predict the ultimate strength of NSM FRP–strengthened RC member in flexure. A series of experimental tests were conducted to verify the effectiveness of the proposed method. The designed RC beams strengthened with NSM–carbon FRP (CFRP) outperformed the externally bonded CFRP systems both in ductility and flexural strength. Additionally, the proposed design method was experimentally validated by precisely predicting the ultimate strength of tested specimens.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support received from the Natural Science Fund of China (Project No. 51478362) and the Open Project Program of the Key Laboratory of Structure Engineering of Shanghai (Project No. 2013-KF03). The authors also wish to express special gratitude to Dr. Yuan Liu for her assistances.
References
ACI (American Concrete Institute). (2008). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-08, Farmington Hills, MI.
Burke, P., Bisby, L. A., and Green, M. F. (2008). “Performance of NSM-FRP strengthened concrete slabs at low temperatures.” 4th Int. Conf. on FRP Composites in Civil Engineering, International Institute for FRP in Construction, Winnipeg, Manitoba, Canada.
De Lorenzis, L., Lundgren, K., and Rizzo, A. (2004). “Anchorage length of near-surface mounted fiber-reinforced polymer bars for concrete strengthening—Experimental investigation and numerical modeling.” ACI Struct. J., 101(2), 269–278.
De Lorenzis, L., and Teng, J. G. (2007). “Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures.” Composites Part B, 38(2), 119–143.
ECC (European Committee for Concrete). (1990). “CEB-FIP model code for concrete structures.” Lausanne, Switzerland.
Focacci, F., Nanni, A., and Bakis, C. (2000). “Local bond-slip relationship for FRP reinforcement in concrete.” J. Compos. Constr., 24–31.
GB (GuoBiao, National Standards of the People’s Republic of China). (1992). “Standard method for testing of concrete structures.”, China Architecture & Building Press, Beijing.
GB (GuoBiao, National Standards of the People’s Republic of China). (2006). “Strengthening concrete structure design code.”, China Architecture & Building Press, Beijing.
Oehlers, D. J., Rashid, R., and Seracino, R. (2008). “IC debonding resistance of groups of FRP NSM strips in reinforced concrete beams.” Constr. Build. Mater., 22(7), 1574–1582.
Park, R., and Paulay, T. (1975). Reinforced concrete structures, Wiley, Hoboken, NJ.
Rasheed, H. A., Harrison, R. R., Peterman, R. J., and Alkhrdaji, T. (2010). “Ductile strengthening using externally bonded and near surface mounted composite systems.” Compos. Struct., 92(10), 2379–2390.
Sena-Cruz, J., and Barros, J. A. (2004). “Modeling of bond between near-surface mounted CFRP laminate strips and concrete.” Comput. Struct., 82(17–19), 1513–1521.
Wu, Y. F., Jiang, J. F., and Liu, K. (2010). “Perforated SIFCON blocks—An extraordinarily ductile material ideal for use in compression yielding structural systems.” Constr. Build. Mater., 24(12), 2454–2465.
Wu, Z., Iwashita, K., and Sun, X. (2007). “Structural performance of RC beams strengthened with prestressed near-surface-mounted CFRP tendons.” American Concrete Institute, Farmington Hills, MI.
Zhou, H., and Attard, T. L. (2012). “Rehabilitation and strength sustainability of fatigue damaged concrete-encased steel flexural members using a newly developed polymeric carbon-fiber composite.” Composites Part B, 45(1), 1091–1103.
Zhou, H., Attard, T. L., Zhao, B., Yu, J., Lu, W., and Tong, L. (2013). “Experimental study of retrofitted reinforced concrete shear wall and concrete-encased steel girders using a new CarbonFlex composite for damage stabilization.” Eng. Fail. Anal., 35(26), 219–233.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Oct 22, 2015
Accepted: Apr 20, 2016
Published online: Jul 8, 2016
Discussion open until: Dec 8, 2016
Published in print: Feb 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.