Influence of External Compressive Stresses on the Performance of GFRP-to-Concrete Interfaces Subjected to Aggressive Environments: An Experimental Analysis
Publication: Journal of Composites for Construction
Volume 20, Issue 2
Abstract
Despite the fact that fiber reinforced polymer (FRP) composites are a reliable structural material with reasonable durability performance, the environment to which the strengthened structure is exposed can make the strengthening system vulnerable. In this study, the effectiveness of externally bonded reinforcement (EBR) systems when external compressive stresses are applied to glass fiber reinforced polymers (GFRP)-to-concrete interfaces in several aggressive environments is analyzed. The compressive stress imposed on the GFRP-to-concrete interface intends to simulate, for instance, the effect produced by a mechanical anchorage system applied to the EBR system. The design and the region to set those mechanical anchorage systems are not yet well understood and are mostly applied without really knowing how they will behave. This work shows an exhaustive experimental program based on several double shear tests subjected to salt fog cycles, dry/wet cycles and two distinct temperature cycles: from to and to . The Mohr-Coulomb failure criterion was found to provide a good representation of the performance of the GFRP-to-concrete interface, and changes of cohesion and the internal friction angle of those interfaces during the hours of exposure to the aggressive environments are reported.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to Fundação para a Ciência e Tecnologia for partial financing of the work under the UNIDEMI Strategic Project UID/EMS/00667/2013.
References
Abdelouahed, T. (2006). “Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate.” Int. J. Solids Struct., 43(14–15), 4154–4174.
Adhikary, B. B., and Mutsuyoshi, H. (2002). “Numerical simulation of steel-plate strengthened concrete beam by a non-linear finite element method model.” Constr. Build. Mater., 16(5), 291–301.
Al-Mahaidi, R., Pham, H. B., and Saouma, V. (2007). “Discrete-smeared crack finite element modelling of CFRP debonding mechanisms in RC members.” Univ. of Patras, Patras, Greece.
Au, C., and Büyüköztürk, O. (2006). “Peel and shear fracture characterization of debonding in FRP plated concrete affected by moisture.” J. Compos. Constr., 35–47.
Benzarti, K., Chataigner, S., Quiertant, M., Marty, C., and Aubagnac, C. (2011). “Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays.” Constr. Build. Mater., 25(2), 523–538.
Benzarti, K., Quiertant, M., Chataigner, S., and Aubagnac, C. (2013). “Durability of FRP strengthened concrete specimens under accelerated ageing.” Organic materials for sustainable construction, Y. Mouton, ed., Wiley, Hoboken, NJ.
Biscaia, H. C. (2012). “Behaviour and modelling of GFRP-to-concrete interfaces of reinforced concrete elements exposed to aggressive environments.” Ph.D. thesis, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal (in Portuguese).
Biscaia, H. C., Chastre, C., and Silva, M. A. G. (2012). “Double shear tests to evaluate the bond strength between GFRP/concrete elements.” Compos. Struct., 94(2), 681–694.
Biscaia, H. C., Chastre, C., and Silva, M. A. G. (2013). “Nonlinear numerical analysis of the debonding failure process of FRP-to-concrete interfaces.” Composites Part B, 50, 210–223.
Biscaia, H. C., Micaelo, R., Teixeira, J., and Chastre, C. (2014a). “Delamination process analysis of FRP-to-parent material bonded joints with and without anchorage systems using the distinct element method.” Compos. Struct., 116, 104–119.
Biscaia, H. C., Micaelo, R., Teixeira, J., and Chastre, C. (2014b). “Numerical analysis of FRP anchorage zones with variable width.” Composites Part B, 67, 410–426.
Biscaia, H. C., Silva, M. A. G., and Chastre, C. (2008). “Caracterização experimental e modelação numérica da ligação GFRP/betão.” Revista da Associação Portuguesa de Análise Experimental de Tensões (APAET), 6, 9–18 (in Portuguese).
Biscaia, H. C., Silva, M. A. G., and Chastre, C. (2014c). “An experimental study of GFRP-to-concrete interfaces submitted to humidity cycles.” Compos. Struct., 110, 354–368.
Biscaia, H. E. C. (2006). “Rotura por perda de aderência entre reforços poliméricos com fibras de vidro e elementos estruturais de betão.” M.Sc. thesis, Instituto Superior Técnico, Universidade Técnica de Lisboa, Lisboa, Portugal (in Portuguese).
Biscaia, H. E. C., and Silva, M. A. G. (2007). “Environmental effects on bond of GFRP external reinforcement to RC beams.”, Univ. of Patras, Patras, Greece.
Breña, S. F., and McGuirk, G. N. (2013). “Advances on the behavior characterization of FRP-anchored carbon fiber-reinforced polymer (CFRP) sheets used to strengthen concrete elements.” Int. J. Concr. Struct. Mater., 7(1), 3–16.
Camata, G., Spacone, E., and Zarnic, R. (2007). “Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates.” Composites Part B, 38(2), 277–288.
Carrara, P., and Ferretti, D. (2013). “A finite-difference model with mixed interface laws for shear tests of FRP plates bonded to concrete.” Composites Part B, 54, 329–342.
Carvalho, T., Chastre, C., Biscaia, H., and Paula, R. (2010). “Flexural behaviour of RC T-beams strengthened with different FRP materials.” 3rd Int. Fib Congress and Exhibition “Think Globally, Build Locally,” Fib, Switzerland.
CEN (European Committee for Standardization). (2004). “Eurocode 2: Design of concrete structures. Part 1-1: General rules ad rules for buildings.” EN 1992-1-1, Brussels.
Chaallal, O., Nollet, M., and Perraton, D. (1998). “Strengthening of reinforced concrete beams with externally bonded fiber-reinforced-plastic plates: Design guidelines for shear and flexure.” Can. J. Civ. Eng., 25(4), 692–704.
De Lorenzis, L., Fernando, D., and Teng, J. G. (2013). “Coupled mixed-mode cohesive zone modeling of interfacial debonding in simply supported plated beams.” Int. J. Solids Struct., 50(14–15), 2477–2494.
Especificação. (1968). “Betão. Ensaio de compressão.”, LNEC, Lisboa, Portugal (in Portuguese).
Fava, G., Mazzotti, C., Poggi, C., and Savoia, M. (2007). “Durability of FRP-concrete bonding exposed to agressive environment.”, Univ. of Patras, Patras, Greece.
Ferracuti, B. (2006). “Strengthening of RC structures by FRP: Experimental analyses and numerical modelling.” Ph.D. thesis, Università degli Studi di Bologna, Bologna, Italy.
Ferrari, V., Padaratz, I., and Loriggio, D. (2002). “Reforço à flexão de vigas de concreto armado com manta de fibra de carbono: Mecanismos de incremento de ancoragem.” Acta Scientiarum Maringá, 24(6), 1783–1791 (in Portuguese).
FIB (Fédération Internationale du Béton). (2001). “Externally bonded FRP reinforcement for RC structures.”, Lausanne, Switzerland.
Greenhalgh, E., and Hiley, M. (2008). “Fractography of polymer composites: Current status and future issues.” 13th European Conf. on Composite Materials, Stockholm.
Grelle, S. V., and Sneed, L. H. (2013). “Review of anchorage systems of externally bonded FRP laminates.” Int. J. Concr. Struct. Mater., 7(1), 17–33.
Klamer, E. L. (2009). “Influence of temperature on concrete beams strengthened in flexure with CFRP.” Ph.D. thesis, Eindhoven Univ., Eindhoven, Netherlands.
Kootsookos, A., and Mouritz, A. P. (2004). “Seawater durability of glass- and carbon-polymer composites.” Compos. Sci. Technol., 64(10–11), 1503–1511.
Malek, A. M., Saadatmanesh, H., and Ehsani, M. R. (1998). “Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end.” ACI Struct. J., 95(1), 142–152.
Martinelli, E., Napoli, A., Nunziata, B., and Realfonzo, R. (2012). “Inverse identification of a bearing-stress-interface-slip relationship in mechanically fastened FRP laminates.” Compos. Struct., 94(8), 2548–2560.
McSweeney, B. M., and Lopez, M. M. (2005). “FRP-concrete bond behavior: A parametric study through pull-off testing.” 7th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Kansas, MO, 441–460.
Mendes, R. M. V. (2008). “CFRP strip anchorage systems to reinforced concrete elements.” M.Sc. thesis, Instituto Superior Técnico, Lisboa, Portugal (in Portuguese).
Mukhopadhyaya, P., Swamy, R. N., and Lynsdale, C. J. (1998). “Influence of aggressive exposure conditions on the behaviour of adhesive bonded concrete-GFRP joints.” J. Constr. Build. Mater., 12(8), 427–446.
Neubauer, U., and Rostásy, F. S. (1997). “Design aspects of concrete structures strengthened with externally bonded CFRP-plates.” Proc., 7th Int. Conf. on Structural Faults and Repairs Vol. 2, 109–118.
Obaidat, Y. T., Heyden, S., and Dahlblom, O. (2010). “The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM.” Compos. Struct., 92(6), 1391–1398.
Pešic, N., and Pilakoutas, K. (2003). “Concrete beams with externally bonded flexural FRP-reinforcement: Analytical investigations of debonding failure.” Composites Part B, 34(4), 327–338.
Radfar, S., Foret, G., and Sab, K. (2012). “Failure mode analyses of fibre reinforced polymer plated reinforced concrete beams.” Int. Conf. on FRP Composites in Civil Engineering CICE 2012, Rome.
Realfonzo, R., Martinelli, E., Napoli, A., and Nunziata, B. (2013). “Experimental investigation of the mechanical connection between FRP laminates and concrete.” Composites Part B, 45(1), 341–355.
Sebastian, W. M. (2001). “Significance of midspan debonding failure in FRP-plated concrete beams.” J. Struct. Eng., 792–798.
Silva, M. A. G., and Biscaia, H. (2008). “Degradation of bond between FRP and RC beams.” J. Compos. Struct., 85(2), 164–174.
Silva, M. G., and Biscaia, H. C. (2010). “Effects of exposure to saline humidity on bond between GFRP and concrete.” Compos. Struct., 93(1), 216–224.
Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2001). FRP strengthened RC structures, Wiley, Chichester, England.
Teng, J. G., Smith, S. T., Yao, J., and Chen, J. F. (2013). “Intermediate crack-induced debonding in RC beams and slabs.” Constr. Build. Mater., 17(6–7), 447–462.
Teng, J. G., Zhang, J. W., and Smith, S. T. (2002). “Interfacial stresses in reinforced concrete beams bonded with a soffit plate: A finite element study.” Constr. Build. Mater., 16(1), 1–14.
Toutanji, H. A., and Gómez, W. (1997). “Durability characteristic of concrete beams externally bonded with FRP composite sheets.” J. Cem. Concr. Compos., 19(4), 351–358.
Travassos, N. (2004). “Caracterização do comportamento da ligação CFRP-betão.” M.Sc. thesis, Instituto Superior Técnico, Lisboa, Portugal (in Portuguese).
Van Gemert, D., and Brosens, K. (2001). “Anchorage of externally bonded reinforcements subjected to combined shear/bending action.” Composites in Construction, Porto, Portugal.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jan 16, 2015
Accepted: Jun 5, 2015
Published online: Aug 13, 2015
Discussion open until: Jan 13, 2016
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.